BULLETIN #B020
REPLACING BLACK RETAINING
CLIPS
ON THE JOBOLIFT
This bulletin will instruct you
how to replace the black retaining clips (our part #93040 or 92157) on your JOBO Lift
(manufactured after 1993).
The tool required to perform this
repair is:
A #1 Phillips screwdriver.
The required parts are:
- ATL-1000 and ATL-1500 Black Retention Clip,
part #93040, sold individually.
- CPP/A JOBO Lifts and all other ATL's Black
Retention Clip, part #92157, sold in pairs.
Recommended JOBO Refurbishment Kit:
1 x JoboLift Refurbishment kit for JoboLifts with black retention clips (JOBO
Part # LIFT_REFURB-2). The refurbishment kit contains black
retention clips, transfer gears, grease for transfer gears, rollers, lift arm grease, red
cap with bar, and installation directions for the black retention clips.
NOTE: The removal of your JOBO
Lift is not necessary to perform this repair.
1) Remove the two Phillips screws that hold
the clip in position.
2) Install the new retention clip by
installing the screws removed in step 1.
Only one retention clip is used in ATL-1000's
and ATL-1500's.
One pair of retention clips are used in the
ATL-1, ATL-2, ATL-2 PLUS, ATL-2000, ATL-3000, and ATL-2X00, if the new style lift arm has
been installed. Models produced after 1993 should have the new style lift arm already
installed.
Back to Top
If you have any questions, contact us utilizing one of the
following methods:
Equipment or Processing Questions:
- Phone: Customer Service Department (734) 205-9421
e-mail: tech@jobo-usa.com
Repair Questions:
- Phone: Repair Department (734) 205-9420
- e-mail: repair@jobo-usa.com
- Telephone (734) 677-6989
- Fax: (734) 677-6963
-
- Postal address
- P.O. Box 3721, Ann Arbor, MI 48106
- Shipping Address
- 4401 Varsity Drive, Suite D, Ann Arbor, MI 48108
- Electronic mail
- Sales: sales@jobo-usa.com
- Equipment & Processing Questions: tech@jobo-usa.com
Repair Information: repair@jobo-usa.com
- Shipping or Billing Questions: help@jobo-usa.com
Webmaster: webmaster@jobo-usa.com
- JOBO Quarterly: jq@jobo-usa.com
Back to Top
|