H=;About...
;About... http://www.notetab.net ~
To edit a User Dictionary (such as default.udt) first open it in NoteTab from NoteTab's main folder or its Dictionaries folder. If one is not open, you will be prompted to browse to it. Delete the lines you do not want leaving no blank line in their place. You can use the DeleteLine clip for this by placing your cursor on the line and clicking on the clip. Additional line deletions can be done by placing your cursor on the line (or using your Up/Down keys) and pressing "Ctrl+Space Bar".


H=Open *.udt
^!Open ^?{(T=O;F="User Defined Dictionaries|*.udt")Your *.udt files may be in NoteTab or Dictionaries=^$GetAppPath$}
^!Info [L]To edit a User Dictionary (such as default.udt) first open it in NoteTab from NoteTab's main folder or its Dictionaries folder. If one is not open, you will be prompted to browse to it. Delete the lines you do not want leaving no blank line in their place. You can use the DeleteLine clip for this by placing your cursor on the line and clicking on the clip. Additional line deletions can be done by placing your cursor on the line (or using your Up/Down keys) and pressing "Ctrl+Space Bar".


H=Edit.udt
; Last updated on 12-13-2000, jody
^!Continue To edit a User Dictionary (such as default.udt) first open it in NoteTab from NoteTab's main folder or its Dictionaries folder. If one is not open, you will be prompted to browse to it. If you have not done so, please read About before continuing. Continue?

^!SetHintInfo Reformatting ^$GetDocName$...
^!SetScreenUpdate Off
^!Jump 3
^!Set %Counter%=0

:Loop
^!Find "=" S
^!IfSame "^$GetLine(-1)$" "[Auto Correct]" ListCount
^!Select Bol
^!InsertText IGN_^%Counter%=
^!Jump +1
^!Inc %Counter%
^!Goto Loop

:ListCount
^!Find "IGN_ListCount=" SBI
^!IfError Info
^!Select Eol
^!InsertText IGN_ListCount=^%Counter%
^!Jump 1

:Info
^!Info Simply repeat the process to delete more words. You may now Save & Close the file if you are satisfied with it.^p^pHappy NoteTabbin'!^p^pJody Adair^pmailto:Sojourner@SureWord.com^phttp://www.notetab.net^p


H=DeleteLine
^!DeleteLine


H=Merge .udt's
; Copy .udt's into one new doc. Delete the following lines
; from each .udt's copy and run script over documents
; [Added]
; IGN_ListCount=nnn
; [Auto Correct]
; AC_ListCount=nnn
; Replace existing .udt with the merged words. (Note: the
; [AutoReplace] is set to zero. Be careful not to use
; the one in the new udt made if you have an existing auto
; correct list.

^!SetHintInfo Reformatting ^$GetDocName$...
^!SetScreenUpdate Off
^!Replace "IGN_\d+=" >> "" WASR
^!Replace "^p^p" >> "^p" WAS
^!IfError Next else Skip_-1
^!Select All
^$StrSort("^$GetText$";1;1;1)$
^!Jump 1
^!Set %Counter%=0

:Loop
^!If ^$GetRow$ = ^$GetLineCount$ ListCount
^!InsertText IGN_^%Counter%=
^!Jump +1
^!Inc %Counter%
^!Goto Loop

:ListCount
^!InsertText ^p[Auto Correct]^pAC_ListCount=0^p
^!Jump 1
^!InsertText [Added]^pIGN_ListCount=^%Counter%^p