Bede Aircraft Pictures

The original BD-7 prototype at the Bede Aircraft Co. facilities (From BD News magazine, 1976). Don't those seats look like lawn chairs to you?

Another view of the same prototype aircraft. Look at all the plexiglass... the view from the cockpit would have been unmatched!

The BD-7 was meant to use a standard Lycoming or Continental engine, though there was some talk of two 2-cylinder, 2-cycle engines tied together as one powerplant.  Certainly there was more than enough space in the design for a standard engine installation, or maybe even a medium-size turbine.

Rear view of the BD-7 fuselage, with panels in place.

Same view, but earlier in the construction process. You can see the various bulkheads, firewall, horizontal stabilizer spar (right hand half), and on the lower left hand side you can catch a glimpse of the main spar and saddle.. In fact, it's not unlike the BD-5, but it looks easier to build.

A partially constructed section of a BD-7 wing. As you can see, the chord is much larger than that of a BD-5 wing, and if you look closely you can see the fuel cap opening between the fourth and fifth far ribs.  Large tanks?

Now here's something most people haven't seen -- Jim Bede's Flying Wing.  It is inflatable, and survives to this day. In fact, it was auctioned in mid-1998.

These are four images of the raw Solar Titan T62A1 turbine engine. This is the engine which is converted to produce the 90 shp (shaft horsepower) Quantum engine sold by BD Micro Technologies to make a BD-5TP turboprop model. Compare this picture to the one in the BD-5 Expo Pictures section. The modifications are extensive. You can also obtain a kit to modify the engine yourself, but BD Micro does not recommend your undertaking such a task on your own. The engines originally came from aircraft such as the Boeing CH-47 medium transport helicopter used by the US Army and other armed forces around the world. It is rated for 3,600 cycles in a commercial (civilian) environment. In military use they are rated for 3,000 cycles. This particular engine has 314 cycles, and is offered as part of the sale of BD-5B S/N 4626 in the Classified Section.

Aaron Oswald's ( BD-5B (1993 picture taken at St. Claire Int. Airport/PHN). Exterior is Imron, all tips and scoops are fiberglass, powered by 1237cc turbocharged Honda, prop is P-Tip Prince, 46" diameter, 57 degree pitch, with electrically-actuated flaps!

BD-5B at the March Air Force Base Museum

This BD-5 landed just a bit too hard on the nose.
It's for sale. $1500. Winter project? Sorry, it's been sold!

The Bud Light BD-5 Jet at Oshkosh '97

Dave "Hammer" Harris' highly modified BD-5J at the Arlington '97 airshow. This aircraft is for sale at $250,000 including a spare certified TRS-18 Microturbo engine. Contact

BD-5J Pure Jet, Highly modified with Allison 250 engine (the exhaust is under the horizontal stabilator!) It is registered in Canada, does 250 mph cruise and is for sale for $80,000. For more info, email:

This BD-5B is prop-driven, one of the first prototypes, using either the Hirth or Kiekhaefer engines. The picture on the right gives you a pretty good idea of the small size of the BD-5. If you look closely, you'll notice that the picture on the left is the same as on the right, retouched to remove the man standing next to the plane. The third picture is of the same aircraft in flight.

Turbine Technologies Inc. did this outrageously good-looking modification to a BD-5 to install two of their TF45 geared fan turbine engines. This is their technology demonstrator. The engines only produce 40 lbs of thrust, not enough to fly, but it sure does look good. They can be reached at, but they are not planning to sell their engines to the homebuilt market. The modifications were done entirely in-house. In fact, they did once ask that anyone with an interest in this type of engine for the BD-5 contact them, to gage public interest. Less than a dozen people did so, and nothing was ever done.

Bede Aircraft's BD-12. Looks a lot like the BD-5, doesn't it? I don't know how many of these are flying. If anyone has more information on this aircraft, I'd love to hear from you.

This is a mockup of the same aircraft pictured above, the BD-12.

A side-by-side comparison of artist's renderings of the BD-12 and BD-14.

The first picture above is the original BD-5 on a test flight. The second picture is modified to show a conceptual stretch modification to the BD-5 to add space for more fuel and baggage. To my knowledge no such modification has actually been attempted, nor should it be, in my opinion.

This is a top-down view of the BD-5's main gear compartment, with the main gear retracted. Notice the very small disk brakes on the wheels. The large tube just aft of the wheels is the center spar; the cable running in between the wheels to the rear of the aircraft is the flap control cable.
 The Bud Light Air Force BD-5 Jet, a modified version of the BD-5J that visited Puerto Rico some time ago. The aircraft originally used the French-made TRS18 turbojet engine. The lower picture is the new T300 jet engine for the BD-5J. This engine produces a maximum of 300 lbs of thrust and sucks up the entire contents of the standard fuel tanks in 45 minutes (the Bud Light model has a full wet-wing design for larger fuel capacity).

A completed BD-5 fuselage, on its wheeels, probably awaiting construction of the wings and other components.
 Three views of the BD-5 during flight testing. Left is the test pilot in the cockpit, center is the test pilot in the cockpit and about to close the canopy, right is the BD-5 panel (minimum VFR).
 A couple of pics of the BD-4, another Jim Bede product designed originally introduced in 1969. As you can see, the aircraft was available in tricycle and conventional gear versions. Many of these are still flying!

Another pic of the BD-4, this time an engineering drawing, in profile.

This drawing shows, in very general terms, how to install a Ford 3.8 liter V6 into the engine compartment of a BD-4.

Last Update: 9/13/99