Care and Maintenance of your Bisonne laminate surface
UPON INSTALLATION, ENSURE ALL TRADESPEOPLE PROTECT THE SURFACE FROM SCRATCHING BY PLACING A PROTECTIVE CLOTH (OR SIMILAR) BETWEEN THEIR WORK TOOLS AND YOUR NEW SURFACE.
Bisonne™ offers you a hardwearing surface and with reasonable care it will last for many years. There are limits and the surface requires regular care and attention.
Care should be taken with hot pots and pans. Always use a trivet when placing a hot pot or saucepan down on your work surface. Just like sun will burn your exposed skin, so too will laminate be affected by sunlight. You should take all reasonable steps to protect your installation from the sun as colour fade is not covered by warranty. This is even more advised when windows face North or West.
Moving objects across the surface can certainly scratch the surface and spoil its appearance. Pottery casseroles slid on the surface are but one example where scratching may occur.
Dark colours and gloss finishes are more susceptible to showing scratches. Crystal finish surfaces whilst being able to be scratched, generally minimise the visible impact. Generally speaking, lighter colours are more tolerant of visible scratching.
Your Bisonne™ surface will need regular cleaning. All spills should be diluted and wiped clean immediately. We can suggest Mr. Muscle All Purpose Cleaner and Spray and Wipe as suitable cleaners of your Bisonne™ surface. Warm, soapy water, wiped dry, is often all that is required.
Do not use on your Bisonne™ surface any abrasive cleaner such as Steelo Pads, Sandpaper, Scotchbrite™ Pads, Draino, Oven Cleaner, Chemico or Jif. This list is by no way exhaustive.
For further information write to us with your concern at:
Duratech Wholesale Limited
P.O. Box 20202, The Base
and we will attempt to solve your concern for you. Please ensure all your details are included in your letter with as much information about your concern so that we can best assist you.
Not recommended as Cleaning Products
Good Cleaning Products
Phone Duratech New Zealand (07) 850 5601
internationally +64 7 850 5601
Prices are indicitve only, and are subject to change. REGINOX™ and BISONNE™ are trademarks administered by THE DURATECH GROUP OF COMPANIES.