IPB

Welcome Guest ( Log In | Register )

 Forum Rules Rules
7 Pages V  1 2 3 > »   
Reply to this topicStart new topic
> 10" OEM Forum special
Kyle
post Apr 13 2007, 03:42 PM
Post #1


Administrator
Group Icon

Group: Admin
Posts: 965
Joined: 31-May 06
From: San Diego, CA
Member No.: 1



The 12 (now out of stock) was so popular we decided to run a 10" This one is slightly different than the 12. It uses the TC-2000 voice coil, and a TC9 motor, and incorporates a tall surround, wide spider (of course), and special light weight composite fiber honey comb core cone (very rare). These drivers are new!

NOTE: Actual drivers have BLACK frames (not silver)

    OEM overstock TC-10.
    Lightweight Honeycomb glass fiber cone
    1" tall NBR surround
    28mm xmax
    190 ounce motor
    800 watts RMS
    3" wide, long-wind AL voice coil
    Dual 8.5" spiders with woven leads
    Single 4 ohm DCR or Dual 4 ohm DCR
    Actual weight: 29.5 pounds
    TSP's

    Qts 0.357
    Qes 0.400
    Qms 3.35
    Fs 30Hz
    Res 3.11 ohms
    Ls 4.0 mH
    Lp 6.26 mH
    Rp 9.9 ohms
    Dia 208mm
    Vas 19.3 liters
    Mms 224 grams
    Cms 119 um/N
    BL 18.35Tm
    Spl 83.3dB
TC 10 OEM SVC
$175 Free shipping within US
In stock!



TC 10 OEM DVC
$175 Free shipping within US
In stock!

If this is overseas, just send heather a PM, and she will work on your quote. Note: quotes can take a while! Recommended Alignments:

Small Sealed: 0.3 cubic feet
Large Sealed 0.6 cubic feet

Ported:
0.5-0.6 cubic feet with a single 10" or 12" PR

(don't try and port this any other way, it just wont work right unless you want peaky SPL bass.)

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SkeetDaddy
post Apr 13 2007, 04:05 PM
Post #2


TC2
**

Group: Members
Posts: 61
Joined: 11-October 06
Member No.: 392



now that is a nice speaker... how long do you think you will have them?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Kyle
post Apr 13 2007, 04:14 PM
Post #3


Administrator
Group Icon

Group: Admin
Posts: 965
Joined: 31-May 06
From: San Diego, CA
Member No.: 1



Maybe a week or two depending on popularity.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Supa_c
post Apr 13 2007, 05:17 PM
Post #4


Mr. Bubbles
******

Group: VIP
Posts: 850
Joined: 2-June 06
From: So cal
Member No.: 6



Best looking TC sub cone IMO.
And ive seen all their cones...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
bjboertje
post Apr 13 2007, 08:31 PM
Post #5


TC7
****

Group: Members
Posts: 176
Joined: 9-August 06
From: Pella, IA
Member No.: 222



x2. i might have to sell my 5200 and get a pair of these! anyone want a 12" 5200?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
michael hurd
post Apr 13 2007, 10:02 PM
Post #6


TC2+
***

Group: Members
Posts: 91
Joined: 5-March 07
From: Nipigon, ON
Member No.: 1,055



That is SEXY !! Wow, those won't last long at all... a pair would be sweet.... but alas, I need to get my enclosure started for my others.
User is online!Profile CardPM
Go to the top of the page
+Quote Post
sqbuf2000
post Apr 14 2007, 07:50 AM
Post #7


TC2
**

Group: Members
Posts: 34
Joined: 22-February 07
From: Las Vegas via SD
Member No.: 938



QUOTE(michael hurd @ Apr 13 2007, 11:02 PM) *

That is SEXY !! Wow, those won't last long at all... a pair would be sweet.... but alas, I need to get my enclosure started for my others.




x2 on the sexyness (IMG:style_emoticons/default/wub.gif) ,that would make a nice home sub paired with a 12"PR...drool..drool..drool!!!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SkeetDaddy
post Apr 14 2007, 08:02 AM
Post #8


TC2
**

Group: Members
Posts: 61
Joined: 11-October 06
Member No.: 392



How would these run with a ported enclosure turned to around 33hz with 250WRMS? I may be able to scrape up some extras money if it will run well with my current power.

also, whats the mounting depth on these bad boys?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Adrian D
post Apr 14 2007, 10:42 AM
Post #9


TC2
**

Group: Members
Posts: 36
Joined: 8-September 06
Member No.: 306



if these things are so popular, why not get them into production ?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Kyle
post Apr 14 2007, 10:51 AM
Post #10


Administrator
Group Icon

Group: Admin
Posts: 965
Joined: 31-May 06
From: San Diego, CA
Member No.: 1



QUOTE(sqbuf2000 @ Apr 14 2007, 07:50 AM) *

x2 on the sexyness (IMG:style_emoticons/default/wub.gif) ,that would make a nice home sub paired with a 12"PR...drool..drool..drool!!!



Our IS-101 will feature a driver simialr to this with a single 10" PR
(IMG:http://www.tcsounds.com/images/101.jpg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
1sashenka
post Apr 14 2007, 12:57 PM
Post #11


Newbie
*

Group: Members
Posts: 7
Joined: 23-February 07
Member No.: 948



"quotes can take a while!"

That's true! I have sent two or three e-mails already. Not sure how many, cause it's taking at least two months now. Heather must not be working there anymore.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SkeetDaddy
post Apr 14 2007, 01:37 PM
Post #12


TC2
**

Group: Members
Posts: 61
Joined: 11-October 06
Member No.: 392



QUOTE(SkeetDaddy @ Apr 14 2007, 11:02 AM) *

How would these run with a ported enclosure turned to around 33hz with 250WRMS? I may be able to scrape up some extras money if it will run well with my current power.

also, whats the mounting depth on these bad boys?


no one?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Kyle
post Apr 14 2007, 05:48 PM
Post #13


Administrator
Group Icon

Group: Admin
Posts: 965
Joined: 31-May 06
From: San Diego, CA
Member No.: 1



QUOTE(SkeetDaddy @ Apr 14 2007, 01:37 PM) *

no one?



TC-1000 10" would do better
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Distortion
post Apr 14 2007, 09:07 PM
Post #14


Newbie
*

Group: Members
Posts: 17
Joined: 12-April 07
From: New Orleans, LA
Member No.: 1,355



Damn! I just bought 2 of the OEM TC-12's, but after reading the specs for the TC-10, I would much prefer two of the Dual 4 Ohm TC-10's to the TC-12's for my application (car audio).
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Justintoxicated
post Apr 15 2007, 12:12 AM
Post #15


Newbie
*

Group: Members
Posts: 29
Joined: 18-September 06
Member No.: 337



OMG I want one so bad, I'm LOVING the cone and surround, power handeling and PRICE.

Will I get to see one at the Meet Tomarrow? what is the mounting depth? I already know if won't fit in my truck (only reason I have TC1000's andnot something better (IMG:style_emoticons/default/sad.gif) )
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Puggsley456
post Apr 15 2007, 11:35 AM
Post #16


Newbie
*

Group: Members
Posts: 18
Joined: 2-April 07
From: Winnipeg
Member No.: 1,276



These are possibly the sexyist driver I have ever seen. Any chance of a 12" or 15" version will ever be released?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SQLfreak
post Apr 15 2007, 01:22 PM
Post #17


TC2+
***

Group: Members
Posts: 111
Joined: 12-July 06
Member No.: 127



holy FCK
THESE ARE AMAZING-----QUOTE REQUEST SENT TO HEATHER !!!!

can you save me 2? its garanteed im getting 2 of these (dual 4ohm), just need a quote!
(IMG:style_emoticons/default/biggrin.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
1986 Buick Grand National
post Apr 15 2007, 08:14 PM
Post #18


TC2+
***

Group: Members
Posts: 109
Joined: 11-September 06
Member No.: 314



QUOTE(1sashenka @ Apr 14 2007, 03:57 PM) *

"quotes can take a while!"

That's true! I have sent two or three e-mails already. Not sure how many, cause it's taking at least two months now. Heather must not be working there anymore.


As I said in another thread, call. Don't e-mail. If you call then you know it's taken care of. When I needed to know shipping charges for the first TC-3000 I didn't bother e-mailing - I called and found out right away. Now of course the shipping is factored in to the price so you don't even have to bother with a shipping quote, unless it's outside the US.
Call.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
unpredictableacts
post Apr 15 2007, 08:32 PM
Post #19


Newbie
*

Group: Members
Posts: 8
Joined: 28-February 07
Member No.: 1,018



what is the depth and disploacement of the 10" version?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
giantgloworm
post Apr 16 2007, 12:41 AM
Post #20


TC2
**

Group: Members
Posts: 39
Joined: 8-June 06
Member No.: 70



Put my order in for a pr of the DVCs!!! (IMG:style_emoticons/default/tongue.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

7 Pages V  1 2 3 > » 
Reply to this topicStart new topic
3 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
1 Members: PolishDude

 



Lo-Fi Version Time is now: 30th April 2007 - 07:52 PM