HOW TO REMOVE THE
INTAKE MANIFOLD / REPLACE IAC VALVE
Remove the fuel rail (covered
previously Click Here)
Unplug
the injector harness from the CHT, TPS, and IAC. also unscrew the main harness
plug bracket from the manifold. (shown is the IAC harness, between the manifold
and block.
Using a 10mm socket, remove the five
bolts holding the manifold to the head.
Using a 14mm socket, remove the two
nuts holding the EGR to the manifold and the doweling pin to the right.
Remove
intake manifold.
IAC is located on the front side of
the manifold. It is held on by two bolts. Also shown is the EGR inlet.
How-To courtesy of
TXFO
Team Focus Is Not Affiliated
With Ford Motor Company.