Home Contact About Patriot Policies
 ADL Feeds
 

Antennas
Flyaway Antennas
Military
Mounts
RF & Components
Alliances
Directions
Distributors
Employment
FAQs
Feedback
Manuals
News
Photo Gallery
Services
Shipping
Tech Support
Tools
Trade Shows
Type-Approvals

 

 

 


ADL Antenna Feeds

C-Band Circular RP2 Series

ADL-RP2-CP300
Model ADL-RP2-CP300
Frequency 3.7 - 4.2 GHz
Polarities 1 C
F/D Range .275 - .335
Polarization Circular LHC/RHC
RF Port 1 WR-229
Mounting 3 & 4 Hole Pattern 1/4" on a 5.750
Polarization Operation Manual
VSWR 1.45 Average
Polarization
Isolation
20 dB typ
Rotation 360
Weight 3 LBs

 

The PRO-LINE feeds use a die cast quarter wave plate that does not have the losses commonly encountered when using DIELECTRIC PLATES in C and linear feeds. The increase in carrier to noise ratio is generally in the one dB range making the Pro-Line the clear leader in performance.

The ADL-RP2-CP-300 Pro-Line feed is a single polarity feed. The WR-229 flange is part of a round to rectangular O.M.T. transition that can be rotated to achieve the desired circular polarization. This is helpful at the time of installation making fine tuning adjustments easy and accurate. The CP-300 has the same outstanding "TI" rejection that all A.D.L. Dual Mode feeds have. The CP-300 is die cast aluminum, powder coated and oven baked for a long lasting finish.

The ADL-RP2-CPOR100 Pro-Line feed will simultaneously receive right hand circular and left hand circular polarities. The two LNBs are mounted vertically. The LNB mounting holes are tapped 1/4"-20. The WR-229 flanges are part of the O.M.T. transducer that can be rotated to achieve the desired circular polarization. This is helpful at the time of installation making fine tuning adjustments easy and accurate. The CP-OR100 has the same outstanding "TI" rejection that all A.D.L. Dual Mode feeds have. The CP-OR100 is die cast aluminum, powder coated and oven baked to 400F for a long lasting finish.


Related Equipment
ADL Ku Band Feedhorns

ADL C/Ku Band Feedhorns

LNBs

Patriot Antennas

TI Filters

Feed Covers

Feed Accessories
Quick Facts
ADL Feed Include precision waveguide flange with water tight gasket

Feeds are available in Linear or Circular Polarizations

No Scalar Ring to adjust

Dual hybrid molding

Controls "TI" interference

All feeds are Powder Coated Gray

Made in the USA!!!


Back to RF Components Home ∙ Feeds Home ∙ ADL Feeds Homes
Copyright 2004 Patriot Antenna Systems. All rights reserved.