Home

Forums

Contact Us

Links

 
>>> Chat
>>> Classifieds
>>> Create A Ride
>>> Faq's
>>> Games
>>> Guest Map
>>> How-To's
>>> Join Team Focus
>>> Members Rides 1
>>> Members Rides 2
>>> Merchandise
>>> Project Car 1
>>> Project Car 2
>>> Ride Of  The Month
>>> ROTM Entry Form
>>> Screensavers
>>> SVT Focus
>>> TF Decals
>>> TF Staff Directory
 

HOW TO REMOVE THE INTAKE MANIFOLD / REPLACE  IAC VALVE

Remove the fuel rail (covered previously Click Here)

Unplug the injector harness from the CHT, TPS, and IAC. also unscrew the main harness plug bracket from the manifold. (shown is the IAC harness, between the manifold and block.

Using a 10mm socket, remove the five bolts holding the manifold to the head.

Using a 14mm socket, remove the two nuts holding the EGR to the manifold and the doweling pin to the right.

Remove intake manifold.

IAC is located on the front side of the manifold. It is held on by two bolts. Also shown is the EGR inlet.

 

How-To courtesy of TXFO

 


Top 50 Ford & RS Sites

myFordPerformance

Team Focus Is Not Affiliated With Ford Motor Company.

 

 
     

(c) Copyright 2005 Team Focus