About MitchellWing, It's founder, It's History and It's Current Owner

A Scottish immigrant who came to the U.S. in 1922, Don Mitchell attended the Boeing School of Aeronautics and then was employed by several aircraft companies during World War II. He made design contributions to the northrop flying wing (YB-49) and collaborated with aviation notables including "Dutch" Kindelberger, Donald doubles, and John Northrop.In he mid-1970's he was asked to produce a flying-wing hang glider that was safer and with increased performance over other designs of that era. The Mitchell Aircraft Corporation was founded in 1976 in Porterville, California to accomplish this goal. When the foot launched Mitchell Wing B-10 flew in the 1977 USHGA Nationals, the hang gliding world was completely astounded. the Mitchell Wing B-10 went on to set and hold every world record in it's class. In 1980, George worthington soared to 17,000 feet and then glided 105 miles, setting two new rigid-wing records.

Mitchell aircraft was swamped with orders from all over the world. With the addition of a tricycle gear and a power plant, the B-10 became an ultralight aircraft. In this configuration, the B-10 won awards for design and performance in the early 1980's. Soon two other designs were added, the U-2 and the P-38, diversifying the company's offerings in the market. These three designs are still held and available in plans from Richard Avalon in California. Richard was a close personal friend of Don Mitchell and is a wealth of information as well as being an all-round good guy.All of these Mitchell models were built from either plans or factory supplied component kits. They were of wood and fabric construction and took an average of 500 to 700 hours to complete. Many kits were sold, with a relatively low percentage of them every completed and flown. the airworthiness of these home-built aircraft depended on the skill and experience of the individual builder.

In 1982 two new designs were developed to better meet the growing demand for these high performance ultralights. The A-10 was a refined upgrade of the B-10 with the same airfoil and performance characteristics, but with an aluminum-clad wing, and new main gear suspension, a beautiful fiberglass pod, and the control stick on the floor. AND it came from the factory ready to fly (kits are also available at the new factory in Truro, Iowa). It was Grand Champion at Oshkosh in 1983 and continued the unmatched performance of the earlier Mitchell models.The T-10 MitchellWing was developed as a two-place, side-by-side ultralight instructional vehicle. It provided dual controls so that students might quickly and safely learn to fly "the wing". Again, demand soared until in 1983 Mitchell Wing, Inc. of Porterville sold manufacturing rights for the A-10 and T-10 models to a group in Tulsa, Oklahoma for a price of $1,250,000. The sale included all tooling, molds, and patterns and only enough raw materials to complete ten Mitchell Wing A-10's, plus three months of hands-on training to teach the Tulsa personnel the techniques for building this high-tech ultralight.The Tulsa Mitchell Wing, Inc. company was well capitalized by its principal, Dr. Robinowitz. their goal was to produce one new A-10 off the assembly line each day, and at their peak employment of 100 employees, they were about to accomplish that goal. During this peak production period, much testing, research, and development was accomplished. Also, vast supplies of raw materials and component parts were acquired. An extensive dealership network was developed. They envisioned law enforcement and military markets and the nearing reality of personal aircraft for practical transportation as well as pleasure. Sales remained strong through 1985 with 125 units sold that year. However, absentee ownership and management problems persuaded Robinowitz to sell.In mid-1985 John connor, manager of the wong production department purchased Mitchell Wing, Inc and all production rights for the A-10 and T-10 models.

Unfortunately in 1989 Connor was injured in an industrial accident. In near continuous pain it became nearly impossible to attend to the business and orders began to fall. This caused him to seek out a buyer for the company.In 1992 Higher Planes, Inc., a Kansas Corporation was formed to save the floundering Tulsa Company. All tooling, component parts inventory, and raw materials were relocated to the rural Kansas site - an old missal facility. Connor provided technical assistance as new personnel learned the production process. A full parts line became again available. Small advertising efforts led to a restoration of sales with 11 units produced and sold in the first year of renewed business. Flight instruction in the T-10 Mitchell Wing was again offered with persons traveling from all over the country for flight orientation in this unique aircraft.

Requests for information packs soared. However, the missal facility business began to interest the president of Higher Planes more and more as people began to contact him as to how they too could purchase such a facility. This caused him to give his attention less and less to building ultralight aircraft and ultralight trainers. It was time for a new owner.In 1997 Larry Smith, America's only business broker who had dedicated himself to selling aircraft businesses was asked to find a buyer for the Mitchell Wing. After six months of offering the business to the buying public and finding many interested buyers who had no money - he bought the company himself. On April 15, 1998 Smith took possession under the corporation name of AmeriPlanes, Inc. and moved the company to Iowa.While continuing as AeroBusiness Broker the company has once again attracted the attention of the ultralight and experimental aircraft industry. Owning all the original jigs, molds, forms, equipment, etc., that had been produced to manufacture these aircraft, working alone Smith can produce 4 to 6 aircraft a year. Each aircraft or kit is built to the buyer's personal requirements.The original A-10 and T-10 have been renamed A-10D and T-10D - the "D" to reflect the word "Deluxe". this was necessitated by the addition of the new A-10B. "B" stands for basic. It is identically the same aircraft as the A-10D but does not have any of the fiberglass parts except those necessary to the completed construction of certain parts of the aircraft.Smith is also developing a new aircraft which will probably not be marketed under the MitchellWing name. It is more of a traditional aircraft - a mid-wing, engine-in-front, twin or single tail boom (depending on whether a single or two place aircraft.

Only because the aerobusiness brokerage is not very time consuming is Smith able to manufacture and design aircraft. The company has been a real opportunity for a man who has been pretty much of a "white collar" worker, to put on his work clothes and do something worth while with his hands. His comment to nearly all who will listen is, "If I didn't have MitchellWing I don't know what I would do that would be as intensely satisfying. I've fund that I am very talented and every aircraft is a work of art." "I'll never regret the day I purchased MitchellWing."Terry Thornton of Culver, Kansas (Culver International Airport) now does all of MitchellWing's training in one of the two MitchellWing trainers (T-10D's). when AmeriPlanes found Terry Thornton, says Larry Smith, we found one of the top light aircraft pilots and one of the top instructors in america." Terry own a Bed and Breakfast at Culver making it possible for people to stay right there beside "Culver er International" and fly early or late of al day.Larry smith and Terry Thornton have became an inseparable and unbeatable team producing quality aircraft and quality instruction.To talk to Larry Smith and arrange to have your aircraft built, or to try out a MitchellWing with instructor Terry Thornton, call 641-765-4555 or e-mail aerobizs@netins.net

 
AmeriPlanes
Larry Smith
P.O. Box 98
Truro, IA 50257
641-765-4555 Voice & Fax
515-250-4200 Cell
aerobizs@netins.net
 
 

©2000 Ameriplanes. All rights reserved.
Report problems to webmaster@ i-rule.net