VMware releases beta of Win-on-Mac solution. December 28, 2006 VMware has released its first public beta version of Fusion, a virtual machine environment for Intel Macs that can run Windows. Like Parallels desktop, Fusion (a codename) can run Windows in Mac OS X, so that both operating systems are available at the same time. The software can take advantage of both processor cores in the Intel Core Duo processor, according to the company.
Fusion enables Windows to both read and burn CDs and DVDs. The company said that Fusion can use USB 2.0 peripherals such as printers, video cameras and external drives. VMware said that the devices don’t need Mac OS X drivers in order to work in the virtual machine environment.
In addition to Windows, Fusion also supports Unix/Linux-based and other x86 operating systems. Fusion will run virtual appliances, pre-built virtual machines that include a non-Windows operating system and application software.
If you’ve used the Fusion beta
Panergy ships first Mac converter for Word 2007 .docx files. December 28, 2006 -- Panergy has shipped docXConverter (US $20), a Mac OS X application that enables Mac users to open and save files in Microsoft’s new Word 2007 .docx file format. At this point, the .docx format is Windows-only, and Microsoft has not said when it would offer a compatibility solution for Macs. docXConverter is the first .docx translator for Mac OS X.
The company described the software:
Problem with Active Directory hanging Macs. December 28, 2006 -- Bruce Clingaman is having problems with some of his Macs with Active Directory. The machines hang and create an empty Kerebose configuration file:
If you’ve used the seen this problem
Reader reports Entourage invitation buttons grey out. December 28, 2006 -- Andres Torres reports a problem with Entourage that prevents the user from accepting invitations. The problems started when he tried to switch to Apple Mail:
If you’ve used the seen this problem
Reader runs Win Vista on Intel Mac w/o Boot Camp. December 18, 2006 -- Brett Radburn sent us a report of his experience installing and running Windows Vista on an Intel Mac mini. He apparently did not use Boot Camp, but created a single-boot, Vista-only Mac:
I thought I’d drop you a line about installing MS Vista Pro (not a RC or a Beta). I booted up off the Install CD. Deleted ALL Partitions. Created a single large partition. And told it to install.
The specs on my mini are 1.66 Duo Core, 80Gb Hdd, 512Mb RAM, Bluetooth, Airport Extreme and a SuperDrive.
Once installed, about 35 mins and 3 reboots, here is what I have noticed:
Video was relatively fast (for what it is), no driver was required. It does not support full Aero 3D glass mode, but is more like an updated XP.
- Ethernet works - no driver required
- USB works - no drivers required
- FireWire works - no drivers required
- No audio - and the ones touted to work under RC1 do not install, have not checked spdif output.
- No remote - and no drivers that I can locate.
- No Bluetooth (have not checked if there is drivers that work)
Overall easy, painless and relatively familiar process.
If you've tried this
Reader feedback on new Parallels beta. December 18, 2006 -- Several readers send us reports on the current beta version of Parallels Desktop, which adds the ability to use the copy of Windows that is installed with Apple’s Boot Camp. (See last week's report.) The readers offered some more installation advice and reported problems, but most reports were favorable.
Joel Bruner offers some advice for installing the Parallels beta:
I just got the new Parallels beta running and it's nice. Of note, though: After the Boot Camp drivers are installed, when you boot there will be another boot menu option of Parallels Configuration, then two hardware profiles "Parallels Configuration" and Config 1. I chose Config first let it load the drivers in, then reboot into Config 1.
Also, the Parallels Tools must be installed for "Coherncy mode" to function, that essential masks out the wallpaper and allows OS X windows to live above and below Windows windows.
David Ramsay has used the Parallels beta on a beta of OS X Leopard:
Not only have I tried it I have tried it under Mac OS X 10.5. It works fine. It’s a shame that the Application icons in the Windows operation are not in the Dock separately, but that will come no doubt.
Steve Fuller has good things to say, but warns about a potential issue with Windows Activation:
I have been using the latest Parallels beta for about a week or so now. I just got around to setting up my Boot Camp partition this week. While there are reports of some people having difficulties with this beta, my experiences have been overwhelmingly positive. My typical setup now has been running Parallels in full screen mode, but having it pinned to a specific virtual desktop (I use Virtue Desktops as my virtual desktop manager). I can flip between OS X and Windows XP without any issues. I have used the coherence mode with success when using my Boot Camp partition, and with some artifacting when using my regular Parallels virtual disk.
The one caveat appears to be that if you do not have a volume license copy of Windows XP, you will end up setting off the WIndows Activation piece of Windows XP.
I’m looking forward to more refinement of this beta. I've been a happy user of Parallels since late July. An XP VM running on Parallels has replaced my main office desktop in my job as a network/systems manager.
I'm running Bootcamp on a new 15" MacBook Pro. My Windows partition is FAT32 so I can access it from the Mac OS X side. Back when I first installed Windows XP Pro, I tried to create multiple hardware profiles, but that caused the Windows side to freeze during startup as the keyboard and mouse were not recognized, and I didn't then know to edit the appropriate .ini file to set the hardware timeout to a positive value. When I bought and installed Parallels Desktop, it was specifically to run from the Windows disk. Silly me. Following the install procedure, I discovered first that Parallels defined itself as a new hardware profile, causing the same startup nastiness as before, and second that Parallels didn't recognize the FAT32 partition. I've decided to wait until things are working better. Hopefully by then the Windows activation problem will have been solved, too.
New Parallels Beta supports Boot Camp, plays catch up to VPC. December 11, 2006 Parallels has released Parallels Desktop Build 3036, a beta (prerelease) version of its next upgrade for its virtual machine environment for Intel-based Macs. One of the major new features is the ability to use the same copy of Windows XP for both Boot Camp and Parallels. Parallels does this by making use of Windows XP installed on the Boot Camp partition. This would enable users to take advantage of access to Mac OS X and Windows under Parallels, and then to boot the Mac from Windows using Boot Camp when higher Windows performance is required.
The beta also includes features that have been standard in Microsoft’s Virtual PC for PowerPC Macs, such as automatically adjusting screen resolution when you drag to resize, and drag-and-drop copying of files and folders between Windows to Mac OS X. There is also a Virtual Machines Catalogue that lists the virtual machines installed, similar to the Virtual PC List in Microsoft’s emulator.
Other new features include:
The company warns users that they must first install Parallels Tools for Boot Camp in Windows XP while Windows is booted from Boot Camp.
Reader Paul McGrath discovered this on his own:
I've discovered you need to install Parallels drivers in your Boot Camp Windows XP before you can use it in the new Parallels beta. If you don't do this then you get a device error when your Boot Camp Windows XP starts in Parallels. They are quite hard to find but if you hunt the Parallels forum someone has put a link to them. I've also put them on my website. If anyone gets the Boot Camp 'grayed out' problem then it may be down to having a third partition on their iMac or MacBook. You need to boot your Mac from the Tiger CD, open Disk Utility and delete the other FAT32 partition, then Boot Camp wont be grayed out.
Parallels Tools for Boot Camp includes the drivers that McGrath mentions.
If you’ve tried this beta how it worked for you.
Update for GroupCal, iCal access to Exchange. December 11, 2006 --Snerdware has released Groupcal version 3.7 (US$55), a new version of the Mac OS X software that enables you to access and manage Exchange Server calendars from Mac OS X iCal. The update fixes some bugs, improves the user interface, and provides additional logging capabilities for troubleshooting support. A download is available here.
Update for Missing Sync for Win Mobile, Mac-PocketPC sync software. December 11, 2006 -- Mark/Space has released The Missing Sync for Windows Mobile 3.0.1 (US$40, free update), an update for the Mac OS X software for sync with PocketPCs and smartphones. The software synchronizes Windows Mobile devices with Mac OS X Address Book, iCal, Microsoft Entourage, iPhoto, iTunes, and other software. The 3.0.1 update fixes bugs related to all-day recurring events as well as other improvements. (Download available here.)
Version 3.0.1 requires Mac OS X 10.4.8 or later. The company also released a version 2.5.2 update for users of the older version Missing Sync for Windows Mobile 2.5.
Another way to use VPC Windows in Boot Camp, Parallels. December 1, 2006 -- Several readers wrote to comment on our previous report about enabling the copy of Windows XP that came with Virtual PC to run with Boot Camp and Parallels Desktop. (iEmulator told us that this method will work with iEmulator as well.)
The readers told us that the easier method is to get Microsoft to send you a new Windows installer CD.
This worked better for me:
1. Call Microsoft Customer Service. Explain to them you have a new computer that requires SP2. This is the same department that replaces lost or broken Windows install disks.
2. Pay about $30. I think it was $23 + $7 shipping.
3. Receive genuine XP SP2 disk in mail.
Len W. has more details:
I am an owner of Microsoft Office 2004 Professional: Mac, which comes with Windows XP Professional PREINSTALLED with Virtual PC. I needed an original install disk of Windows XP Professional ONLY, to use with Parallels Desktop.
I phoned Microsoft at 800-360-7561 and gave them the Windows XP Professional serial number from my running copy of Windows XP Professional. I requested a replacement install disk of ONLY Windows XP Professional.
It cost $23 plus $5 regular shipping plus tax. Since I was in a hurry, I paid $25 extra for 2-3 day Airborne Express (really DHL) shipping.
This is simpler than the procedure mentioned in today's "TIP: Use your VPC copy of Windows in Boot Camp, Parallels." and has a nominal cost.
XP activiation an issue when using VPC's Windows in Boot Camp/Parallels. December 1, 2006 -- Several readers reported that the method we reported of using Virtual PC's copy of Windows in Boot Camp and Parallels (and iEmulator) does work. However, they said that there is an issue with the activation of Windows XP.
I had success getting my VPC 7 professional copy of Win XP to work on both Bootcamp and then finally Parallels. I had to call Microsoft by the time I installed on Parallels since the activation stopped working. I was really reinstalling to replace the VPC that didn't make sense to use on the new iMac. The voice recognition activation process was interesting and I ended up talking to India.
Brian Jackson reported some modifications to the procedure are required:
Yes! You can do this, and it does work. However, there are some slight variations from the instructions on the website posted. For instance, my copy of VPC already came with SP2, so I did not need to perform the slipstreaming step. The problem is, this leaves you without the necessary “Win51ip.SP2” file at the root of the CD. Luckily, you can simply copy the “Win51ip” file, and rename it “Win51ip.SP2”. Don’t just rename the previous file, they both must be there. Other than that, the CD I created worked perfectly in both Parallels and Bootcamp.
The only other issue I had was that when I went to activate Windows in Bootcamp (after installing and activating it in Parallels) it told me that I “...have exceeded the number of times this copy of Windows can be activated...”. I simply clicked on the TELEPHONE button in the activation window, called MS and went through the activation ID number fiasco. When I was asked by their customer service person how many machines this copy of Windows was installed on, I honestly answered one, and was promptly given a code that allowed it to activate. Cumbersome, but why should I buy Windows again when I already own a copy?
TIP: Use your VPC copy of Windows in Boot Camp, Parallels. November 21, 2006 -- MacOSHints.com has a tip on how to use the copy of Windows bundled with Virtual PC with Boot Camp and possibly with Parallels Desktop. The procedure involves download Windows XP Service Pack 2 and creating bootable CD.
It’s not a simple procedure. how it worked for you.
Tip: running FIFA 06 in Boot Camp. November 21, 2006 -- Tim Hyland responded to our reports of problems running FIFA 06 for Windows in Boot Camp. Hyland found a way to make it work:
I had the same problem myself. I believe the readme file the comes in the FIFA 06 install describes this problem.
What I did was open Control Panel -> System -> Device Manager , and disable all unneeded USB devices. Typically with Windows, many of the devices are indistinguishable, named "Generic USB Device" or similar. Hence disabling is an effort of trial and error -- watch out, as some "USB devices" are your keyboard and mouse! I found it sometimes helpful to right-click on a device and view its properties - sometimes it gives some sort of an indication as to what the device is. Warning - accidentally disabling the mouse can lead to problems - if that happens, just use the keyboard to navigate and enable it again.
Try as many different combinations as needed - writing them down helps - until FIFA 06 works normally.
If you've tried this how it worked for you.
TIP: Using Garmin GPS 10 Bluetooth with Virtual PC or Parallels. November 21, 2006 -- Paul Ronney sent us solutions for a long-time problem for virtual machine users on Mac OS X: using a Garmin GPS 10 in Virtual PC or Parallels Desktop. Instead of USB, Ronney used Bluetooth to make the connection. He says that it is easier in Virtual PC (for PowerPC Macs) than in Parallels (for Intel Macs). Ronney’s tip:
This was surprisingly easy to do considering how much trouble I've had trying to use Virtual PC and Parallels with Garmin USB cable devices. These procedures work for me on a G4 PowerBook with Virtual PC and on an Intel iMac with Parallels. The key seems to be that the GPS 10 appears as an RS-232 serial device, which Virtual PC and Parallels support reasonably well, instead of a USB device, for which Virtual PC's and Parallel's lack of support is legendary. While I describe this for the Garmin GPS 10, similar procedures will probably work for other Bluetooth GPS receivers.
(As always, it's a good idea to restart both the Mac and the virtual machine before doing installations like this...)
The first part is done on the Mac side and is the same regardless of whether you are using Virtual PC with a G3/G4 Mac or Parallels with an Intel Mac.
- Turn on the Garmin GPS 10 bluetooth receiver.
- On the Mac, select Apple Menu/System Preferences/Bluetooth /Devices/Set up new device/Continue/Any device/Continu
- Select "Garmin GPS 10" and select Passkey Options / Use a specific passkey/OK/Continue
- When Bluetooth Setup Assistant is done collection information about the device, press Continue
- Enter "1234" (without the quotes) in the passkey box and select Continue (Passkey 1234 was just a wild, lucky guess on my part; I have no idea how one is supposed to know this!)
- Bluetooth Setup Assistant will claim that there are no supported services on this device. Ignore the message and press Continue then Quit.
- Back on the Bluetooth system preference panel, select "Garmin GPS 10" then "Edit serial ports". The device name will be "GarminGPS10-Gps10-1" or something like that, and the service "Gps 10". Select port type "RS-232" and don't check "Require pairing" or "Show in Network Preferences" (maybe you can, but I didn't). Press Apply.
- Quit System Preferences.
Now the process is different depending on which processor your Mac has and thus what emulator you're using.
For Virtual PC on G3/G4 Macs it's really easy:
- Start Virtual PC. From the Edit menu, select "XXX Settings", where XXX is the name of your Virtual PC.
- Select the COM1 or COM2 port, then under COMn Port Settings (where n = 1 or 2) select the Mac Serial Port button and select "GarminGPS10-Gps10-1" from the drop-down menu. Do not select "Modem". Press OK.
- You should now be able to use the GPS 10 like any GPS device. Normally you'll use this with Garmin nRoute; select Utilities/Select GPS/AutoDetect and your GPS 10 unit should appear. Select it.
For Parallels on Intel Macs it's much more difficult:
9. Download and install the free program SerialClient from http://eudyptes.com/SerialClient.php
10. Open SerialClient. Configure with the following settings.
These settings seem to be very critical; almost any other combination I tried at best didn't work and at worst froze the Mac:
- Stream Path: /tmp/serial/ (this is apparently the default path)
- Serial Port: GarminGPS10-Gps10-1
- Baud Rate: 9600
- Data Bits: 8
- Parity: None
- Stop Bits: 1
- Flow Control: None
11. Press "Connect". Close SerialClient.
12. Start Parallels, but DO NOT start your Virtual Machine.
13. Select File / Edit Configuration / Add... / Next
14. From the hardware types, select Serial Port. Press Next.
15. Select the "Use a socket" radio button. Press Next.
16. In the box to specify the name of the socket, enter "/tmp/serial/" (without the quotes) and for role select "Server" from the drop-down menu.
17. Optionally, select "Connect Serial Port at startup" if you want to connect automatically next time. Press Finish.
18. Back in the "Configuration Editor" dialog box, press OK.
19. Start your virtual machine.
You should now be able to use the GPS 10 like any GPS device.
Normally you'll use this with Garmin nRoute; select Utilities/Select GPS/AutoDetect and your GPS 10 unit should appear. Select it.
Centrify Live Webcast on Active Directory access for Mac, UNIX. November 21, 2006 -- Centrify will host a webcast on November 29 describing how to use Centrify’s DirectControl product for joining Mac, UNIX, and Linux workstations and servers to an Active Directory domain. Centrify said the webcast will also demonstrate DirectControl’s centralized Active Directory administration for multiple platforms.
Centrify is requesting that viewers first register for the webcast.
TIP: IMAP service with Exchange 2003 on AD network. November 16, 2006 -- Jeffrey Sheldon sent some advice about configuring Entourage email with Exchange servers on Active Directory networks:
We have two Macintosh clients; user #1 could connect to our Exchange 2003 mail server no problem, but user #2 could not. Permissions were the same, IMAP4SVC was turned on, etc. Constantly getting IMAP login error, failed to authenticate to Exchange Server.
Found out the problem is in Active Directory setup.
If the User logon ID on the Account tab of the user in Active Directory does NOT match the Alias field in the Exchange General Tab, you will not be successful in connecting to Exchange via Mac client (or any other non-windows OS).
We had a user ID of kf304 but their alias was kford. Once the alias was set to the user ID kf304 all is well.
TIP: Sharing an EVDO high-speed wireless link with Parallels Desktop. November 16, 2006 -- EVDOinfo.com has posted a tech note that describes how to set up a high-speed, wireless EVDO (Evolution Data Optimized) connection that you can share between Parallels Desktop running Windows and Mac OS X. The connection is created through the use of an EVDO PC Card in a MacBook or MacBook Pro.
TIP: Fix for MacBook Pro, Keyboard and Boot Camp problem. November 16, 2006 -- Edward Danley responded our report of earlier this week about a problem with the Apple Keyboard in Boot Camp. Danley had the problem and fixed it:
I ran into the same type of problem when I first installed Boot Camp but I blamed the problem on myself. I didn't try an external keyboard but the external mouse did not function.
I was a fresh install of Boot Camp/XP. As I installed the Apple drivers, it crashed. Not unusual for Windows so I simply rebooted. I got check disk errors on XP restart (not good but considering the crash not unusual). After the restart, the keyboard and mouse/track pad would not function at all.
I sat back and tried to think about what happened. I realized I had taken a shortcut. I read that you can extract the Apple drivers and not actually burn/waste a CD. I had simply copied those drivers from my Mac to my FAT32 XP drive.
I went back, reformatted and reinstalled XP this time using a true CD to load the Apple drivers and everything went perfectly.
Another issue with Parallels printing. November 16, 2006 -- Paul Waltman sent us another problem with USB printing from Windows in Parallels Desktop on Intel Macs:
I send this in response to your post inviting cases although mine is HP and not Cannon.
I have parallels installed on a new iMac running XP as the guest and a new HP all-in-one printer (USB connection). I can print fine from the Mac: from the XP side I can print to a windows machine with a different HP printer attached but I cannot print to the printer attached to the Mac either as a network printer or as a locally installed printer. As a bizarre aside, I can scan from the printer into the guest operating system so it is not a "connection" problem.
If you have a solution to this problem
Guest PC 1.9.7 boosts Garmin GPS compatibility. November 13, 2006 Lismore Software Systems has released Guest PC 1.9.7 (US $70, free upgrade), an update to the x86 emulator that runs Windows on PowerPC Macs. The company said that the main purpose of the upgrade is to increase compatibility with Garmin GPS devices. Version 1.9.7 also improves network functionality and fixes some bugs.
Problem and workaround for Boot Camp/MacBook Pro and modem. November 13, 2006 -- Harry Erwin reports a problem with using a modem from Windows in Boot Camp:
My experience is that the Apple Modem is unable to connect in Win XP Pro due to noise--works fine on the Mac Mini running Win XP Pro.
I solved the problem by disabling Bluetooth and AirPort and it works fine.
Keyboard problems with Boot Camp/MacBook Pro. November 13, 2006 -- Two readers reported keyboard problems with the MacBook Pro and Boot Camp. Harry Erwin said:
My USB Apple keyboard experiences intermittent disconnects in Win XP Pro--again it works fine on the Mac Mini. I suspect a power problem.
David Morris reports:
I was just trying to install the latest boot camp driver update on my MacBook Pro Windows XP install, and I clicked "continue anyway" as it was trying to install the "Apple keyboard support", it paused, and then gave me a blue screen and shut down.
Now when I boot into Windows, the keyboard doesn't work and I can't type my password to log in. I don't have an extra keyboard handy at the moment, but I will at the office tomorrow, so I will try that, but I also read somewhere that that will not work. I've been running XP for months, and saw there was a drivers upgrade, so I thought I’d give it a whirl. If you have any insight into this problem, I couldn't find any documented case of it.
If you’ve seen these problems
More on Boot Camp and FIFA 06 for Windows. November 13, 2006 -- Joe Desi is another reader having the problem running FIFA 06 in Windows in Boot Camp:
I am able to run FIFA 06 but all options like team selection, etc, just keep changing automatically and do not allow me to pick.
If you’ve seen this problem
More on Parallels and printing. November 13, 2006 Like other readers, Barbara Wiggins has problems printing from within Windows on Parallels Desktop for Mac:
I have exactly the same problem with my HP officejet G55xi --it works fine on the iMac but on Parallels, I get the window that says my USB printer is being used by another process-wait 5-10 seconds. The User Manual says the USB connection to a printer is unstable and to use a network printer.
Encryption within Mac OS X makes it difficult to run on PC hardware. November 13, 2006 -- eWeek reported that Apple has encrypted parts of Mac OS X, making it difficult to run Mac OS X on non-Apple hardware without a major hacking effort. Such a hack could constitute illegal "reverse-engineering."
Currently, running Mac OS X on standard PC hardware violates Apple’s Mac OS X licensing agreement. The newly discovered encryption enforces the licensing agreement.
MassTransit Dashboard add-on provides real-time monitoring. October 23, 2006 -- Group Logic has shipped MassTransit Dashboard, a web-portal for monitoring and managing an enterprise network of MassTransit servers. Dashboard is an add-on to MassTransit, cross-platform file transfer system for enterprise workflows. MassTransit Dashboard enables users and administrators to do real-time monitoring of their file transfer server. MassTransit Dashboard can also report on server availability and transfer status, and provide detailed job tracking information.
BetterZip 1.3 now opens WinZip encrypted archives. October 23, 2006 -- MacItBetter has released BetterZip 1.3 (US $20) for Mac OS X 10.4, a utility that compresses/decompresses in cross-platform formats. BetterZip’s most significant new feature is the ability to open, extract, and create WinZip-compatible AES-256-encrypted archives. Other new features include:
Another take on printing with Parallels. October 23, 2006 -- Responding to last week’s report on printing problems with Parallels Desktop, Eric Weasner blames it on lack of support for USB 2.0:
Until Parallels is updated to use a 2.0 USB controller, the user community will continue to struggle with printing out of this very good Windows emulator product. I have solved the problem by acquiring a USB 1.1 printer (Brother 1210) and both the Intel iMac and Parallels prints fine over the USB connection. I have repeatedly email and phoned the issue into Parallels Support and Sales departments, however, the only updates I see coming out deal with other improvements.
Hotfix for problem changing Entourage/Exchange shared calendars. October 23, 2006 -- Amir Haque notes that Microsoft has a hot fix for a problem we've reported where Entourage users have problems making changes to shared calendars on Exchange Server:
This is a known issue with Exchange 2003 Server, and Microsoft has article which describes the issue and provides a hotfix for this issue:
Entourage cannot synchronize calendar items on a shared calendar in Exchange Server 2003.
Reader’s PC crashes when Tiger accesses PC MacLAN. October 23, 2006 -- Laurie Livingston reports problems with PC MacLAN, cross-platform file transfer software that installs on the PC. The odd thing is that her PC crashes when she upgraded her Mac to Tiger. Livingston reports:
I am a home user of PC MacLAN.
This product worked fine for awhile. I had a hard drive crash on my Mac, and replaced the old faulty drive. I decided to upgrade to Tiger. I am now using Mac OS X 10.4.8.
Now when I connect to my Mac from the PC, I get a total crash on the PC.
I cannot get ANY answer from the company. Their tech is only through email, it has been 5 days. I can "talk" via online chat, but "server is too busy".
If you’ve seen this problem
TIP: Parallels and Verizon: Share the Internet connection. October 17, 2006 -- Jeffrey Vanek comments on a workaround to a problem getting to the Internet on the Verizon PPPoE DSL connection set up on the Mac from Windows XP in Parallels Desktop. The previous reader suggested adding a DSL router. Vanek found that he didn’t need to add a hardware router:
After struggling with the "Host" networking option in Parallels I bothered to look at the manual. In addition to selecting this networking mode, the user must share the internet connection on the Mac OS X side using the Sharing System Preference. Parallels adds an option "Ethernet Adapter (en2)" to share to. Using this method, no router is required.
More on Parallels printing problem with Canon MP printers. October 17, 2006 -- Edward Felsenthal solved his problem printing to a Canon MP530 from Windows running in Parallels Desktop:
I found the problem. It was necessary for me to install Bonjour. Most printers will fail, I think, without Bonjour.
Eric Ouannes, however, had the same problem with a different model, the MP810. Bonjour didn't help, and he had the drivers installed.
Same problem with Canon MP810. I have one iMac Intel and one laptop running Win XP. It's impossible to print from XP with dedicated drivers (CANON provided) when printer is connected to iMac.
Files and printers are shared under OS X and XP finds the printer. If you use a generic driver, you will be able to print (ONLY print) from XP but not to use other scanning function (for example) unless you plug the printer on XP based PC.
I tried all kind of IP addresses same result with native driver on XP: printer will not print but files are in the printer queue on the iMac as "cancelled" jobs...You can have a look at this site knowing it did not solve the problem of using full capabilities of the printer/scanner: http://www.ifelix.co.uk/tech/3015.html or http://www.ifelix.co.uk/tech/3014.html or http://www.ifelix.co.uk/tech/3012.html depending on your needs.
I initially thought Bonjour would solve the issue but it did not.
I can print/scan normally from iMac.
Another solution could be DAVE, but I haven't tried it yet. Canon should solve the issue not the owner of the device.
Another solution might be to use a USB printer server to share the printer in both. You then bypass the network issue?
If you've seen this problem
Change in name, focus for cross-platform file transfer utility. October 17, 2006 -- Lava Software has renamed its PC-Mac-Net FileShare utility to “Kenbushi,” as of the just-released version 6.2. It has also changed the focus from a business file sharing/groupware use to that of a home-based remote media player with file sharing and data backup functionality.
Version 6.2 enables users to wirelessly control the playback on the media server a PDA with Wi-Fi (such as Pocket PC, Nintendo DS, PlayStation Portable, PalmPilot, and mobile phones).
TIP: Corrupt Prefs file and Citrix ICA Mac client license expiring. October 12, 2006 -- Michael Zara reports of a strange problem with his Citrix client, and how he fixed it:
I'm running the Citrix ICA Client for Mac, 7.00.407, and logging in to my office's network. It's been working for years, but suddenly I get an error message every time I log in, to the effect that my temporary terminal services client license is due to expire in X days.
The problem seems to be in a file in ~/Library/Preferences/Citrix ICA Client called "CitrixID". Deleting this file does the trick.
TIP: Authenticating Win 2000 Server with OS X 10.4.7 clients. October 12, 2006 -- Jason Cutler reports a problem and a workaround with authentication of Mac clients and a Windows server:
We have a number of Macs that connect to Windows 2000 Server and collect Exchange email using Entourage.
When the user’s password has expired, they can no longer mount shares via AFP or SMB, and can’t get email. The Finder reports a 13005 error, and Entourage can’t authenticate either. Manually changing the password on the server didn’t work.
I had to login via a 10.3.9 Mac, which then notified me of the password expiration and prompted me to change it again. Then all was well. My research indicates perhaps installing Microsoft’s UAM for Mac OS X 1.0.2 (March 2002) may alleviate this or perhaps binding the Macs to the Active Directory would help.
If you've seen this problem
Reader solves a Parallels networking issue. October 12, 2006 -- Edward Felsenthal describes how he solved an Internet access problem in Parallels desktop:
Here's a tip I discovered myself. From Windows XP in Parallels, I was unable to get to the Internet on the Verizon PPPoE DSL connection set up on the Mac. Well, the XP system was trying to get a DHCP address and of course, could not since we are using PPPoE and not TCP/IP. So I inserted a Netgear DSL firewall/router in between the Mac and the DSL router and configured it for PPPoE and that fixed the problem. It sure feels bizarre needing a router to route in between a single computer!
If you'd care to comment
Reader problem with Parallels and Canon MP530. October 12, 2006 -- Edward Felsenthal has problems printing with Windows XP in Parallels Desktop:
The owner of our company is running Windows XP under Parallels and can't print to a Canon MP530. installed the Mac drivers on the Mac and can print fine from the Mac side. I shared the printer and set up Windows sharing so I could print from Windows XP. I am able to create the printer in Windows XP using a port of http://192.168.1.4:361/Printers/MP530 (not sure of the actual address since I am not at his office now, but it does work). Here's where I stand. If I use a generic driver, I can print text from XP, through that network port, to the Mac and on to the printer. I even printed a Windows Printer Test Page. But, when I use the MP530 drivers that came on the CD, the print jobs just hang.
Before you suggest using the local USB port instead of the shared Mac port, that was the first thing I tried and again - the jobs won't print.
If you have an idea
SnapMail 5.0 email and file transfer adds central admin. October 12, 2006 -- Glass Bead today released SnapMail 5.0 (US $32 per user), a new version of the secure email and file transfer package that runs on networked Windows and Mac OS X computers. SnapMail can run with or without a server and can connect remote offices.
The new version adds a centralized administration interface, allowing authorized personnel to send lists, settings and standardized messages to groups of users, as well as user improvements.
10.4.8 update fixes Tiger denial of Win client SMB access. October 9, 2006 -- Olivier Marty reports that the recent Mac OS X 10.4.8 update fixed the problem of Tiger denying Windows SMB access problem.
Regarding the "Tiger 10.4 denies Win client SMB access" problem, I would like to report that after months of trying to solve this problem (which seemed to appear when upgrading to 10.4.5) the easy way, I decided yesterday to reinstall Mac OS X 10.4 and let it upgrade itself to 10.4.8. This took about one hour, and did not break any application, except that I had to reinstall PalmOne Hotsync Manager. After 8 months of troubles, all is working perfectly again.
If you can verify that this is now fixed
Dead USB in Windows still a problem with latest Boot Camp release. October 9, 2006 -- Mark Cascella reports that the Boot Camp 1.1.1 update does not solve the USB-in-Windows problem:
I too have noticed this problem on my MacBook Pro: The USB goes dead, the keyboard, trackpad and/or mouse are unresponsive on wake-up.
I downloaded Bootcamp 1.1.1, and installed the latest drivers, but these problems persist.
Another workaround for Entourage login problem. October 9, 2006 -- Ronald Bledsoe found another workaround for the problem where the Entourage logon keeps asking for a password:
We're running OS 10.4.7 and Entourage 11.2.5. It connects back to our Exchange 2003 servers. Two users had the login problem with mailboxes on separate servers. We found that if we set the username to be domain\username and left the domain field blank in Entourage, that the user could stay connected. No other combination of username would work. The problem started for both users at the same time. They were working on the same project.
It turns out that they were both sent an email with a ppt attachment with Japanese characters in the filename. There were also Japanese characters in the file and in the email. I don't know if that caused it, or if it was just a bad email, but I deleted the email and the problem went away. They now can use any combination of username in Entourage.
The MacWindows Entourage Special Reports page lists other suggested workarounds for the problem.
Reader reports Entourage invitation problem. October 9, 2006 -- Frank Cellini in Australia reports a problem with Entourage's invitations:
We have a problem with Entourage in our MS Exchange environmental (latest versions) in that when Entourage users invite other Entourage users to a meeting the recipient can NOT accept or decline this request as these buttons are greyed out. PC users sending invitations to Entourage users are OK. Entourage users sending invites to PC users end up as plain email messages.
If you've seen this problem
Mac OS X 10.4.8 fixes Cisco client incompatibility on Intel Macs; fixes 100’s of processes problem with Win clients. October 6, 2006 -- Apple has released Mac OS X 10.4.8 update, which fixes at least two problems that MacWindows has been reporting.
It is supposed to fix the problem with Tiger that creates hundreds of processes in Mac OS X when Windows file sharing clients are logged on.
Apple says of the upgrade:
Windows File Sharing now generates only one process, avoiding an issue that could cause a Mac OS X computer to become unresponsive if it won a master browser election.
Fredrich Dengel reported that the 10.4.8 update also fixes the Cisco VPN Client kernel extension incompatibility on Intel Duo2 and Xeon Macs, which causes a kernel panic at shutdown.
Neema Agha agreed:
This weekend I upgraded the Mac Pro to 10.4.8 and installed the firmware updates. I reinstalled the VPN software and so far, I haven't experienced any kernel panics.
10.4.8 seems to have fixed this issue. I removed the the CiscoVPN folder from system/library/startupitems so that I could restart or shutdown my machine before I installed 10.4.8. I restarted. Did a permissions check. Install 10.4.8 and the re-installed the Cisco VPN client and now it works fine.
Bootcamp 1.1.1 keyboard glitches. October 6, 2006 -- Ken Cousins reports keyboard problems with Boot Camp Beta 1.1.1, the update that Apple released last month.
Boot Camp Beta 1.1.1 added support for newer Macs with Core 2 Duo-based processors, such as the 24-inch iMac. The release was also supposed to improves support for Apple keyboards. Cousins, however, said that he lost some keyboard functionality in Windows :
I updated my Mac OS X firmware a few days ago, and updated to Boot Camp 1.1.1 at the same time (I run XP for a slew of Windows-only specialty apps I need for my job). While I'm glad they fixed the driver issues with iSight and the headphone/speaker output, I find that some common keyboard shortcuts no longer work in Office or Firefox.
"Dead" shortcuts in Word: ctrl+P, ctrl+O, ctrl+N
"Dead" shortcuts in Firefox: ctrl+L, ctrl+K
I use InputRemapper to switch the location of the ctrl, fn, Win, and Alt keys. I've tried the shortcuts with InputRemapper turned off, turned on, and re-configured, to no avail.
If you’ve seen these problems with Boot Camp 1.1.1
Groupcal 3.62 updated. October 6, 2006 -- Snerdware has released Groupcal 3.62 (US $55, free update), an update to the Mac OS X software that enables iCal users to access Microsoft Exchange calendars. The software is available as a download.
The new version improves the user interface and adds a number of enhancements. For instance, the software will now avoid trying to sync if the Exchange server is not reachable. The new version adds icon for most-recent sync-status icon and date/time of most-recent successful sync. The upgrade also fixes several bugs.
Confirmation that Nokia PC Suite does not work under VPC 7. October 6, 2006 -- Paul Cheng confirmed a previous report that the Nokia PC Suite is incompatible with Virtual PC 7:
I'm using the latest version of PC Suite 6.81R13. Using VPC 7.02 it exhibits the behavior listed on your site. The Bluetooth connection will not work either. The program is already flaky enough under Windows using USB.
Crossover beta 2 advances freestanding Win apps on Mac. October 2, 2006 -- CodeWeavers has released a second beta of Crossover, the software for Mac OS X on Intel-based Macs that can run Windows applications without a Windows operating system. The new version fixes a number of bugs, though the company warns that Beta 2 is still an “early test release” that it describes as “experimental.”
Among the fixes in Crossover Beta 2:
New Parallels Desktop beta eliminates RAM limits. October 2, 2006 Last week, Parallels issued Update Release Candidate 2 (RC2) for Parallels Desktop for Mac, a new beta version of the Windows virtualization software for Mac OS X on Intel-based Macs. This version is a second beta that is compatible with the Mac Pro tower. The current shipping version of Parallels desktop is not compatible with the Mac Pro.
The RC2 beta also eliminates the 2-GB RAM limit of previous versions (including the current shipping version). This version will work with any amount of RAM, and does not require the modification utility that that the previous beta used.
Parallels said that it would release the final version of the Mac Pro-compatible update sometime during the next few weeks.
Messenger for Mac 6 is Microsoft's first Intel- ready app; adds Yahoo chat compatibility. October 2, 2006 Microsoft has released Messenger for Mac 6.0 (free download), the first Microsoft application to be released as a universal binary version. The new version now enables chat sessions with Yahoo! Messenger buddies, as can Windows Live Messenger users.
Messenger for Mac 6.0 also adds customization options and the ability to spell check messages, among other new features.
VPN Tracker 4.8 improves Cisco access, adds support for Netgear, Watchguard VPN routers. October 2, 2006 -- Equinux released VPN Tracker 4.8 (US $40, free update), a new version of the VPN client for Mac OS X. The new version adds support for the Netgear FVS124G VPN router and for the Firebox 8.x firmware revision to Watchguard's VPN device.
The company said that VPN Tracker 4.8 improves compatibility with Cisco Pix devices adds support for extended XAUTH communication with Cisco devices.
Cisco VPN client kernel panics go beyond Mac Pro; kernel extension ID'd as problem. October 2, 2006 -- A number readers reported having similar experiences to last weeks report of Kernel panics with MacBook Pro and the Cisco VPN client. Readers identified the Cisco kernel extension as the incompatible piece causing the problem; removing the extention file before shutting down will prevent a kernel panic. Another reader showed that the incompatibility began recently with Mac Pro system software. However, readers are now reporting that the problem applies to other Intel-powered Macs as well, those with newer builds of Mac OS X.
Fran Hopp, who sees the problem with an iMac, discovered that it problem is caused by the Cisco VPN Client kernel extention:
We just received a 20" Intel iMac. After installing Cisco VPN Client 4.9.00.0050 a kernel panic was generated on every shutdown. Removing the added kernel extension from System/Library/Extensions eliminated the kernel panic. Reinstalling again produced the problem.
Fredrich Dengel also found that Cisco kernel extension file is incompatible:
I can confirm shutdown panics on my 24" Duo 2 iMac using the universal Cisco VPN client software. The application works well, building a stable tunnel, etc.
However, the Cisco VPN kext file in the system/extension folder causes a shutdown panic that can be avoided by removing the file if you must shutdown or restart. A panic will also ensue if you try to reinstall/upgrade the app without removing the offending kext file first.
The only solution I have found is to not shutdown or restart your computer with removing the extension. Since I rarely shutdown my computers, I probably would have never realized the source of the problem had I not coincidentally installed the VPN client and then updated airport security (requiring a shutdown or restart) on my new computer (day one) within a time frame that allowed rapid conclusions to be made from very limited trouble shooting.
Michael Curtis, who first reported the problem, responded to another reader’s note from Wednesday:
A response to Glenn Reid. The third Mac Pro machine wasn't cloned and was a full install. It does work fine, but just messes up the shutdown and reboot. It also didn't break my MacBook Pro.
Brad Allen says that the incompatibility began with a recent change to Apple system software.:
We first saw this problem on a MacPro, but hadn't seen the problem on earlier Intel Macs such as MacBook or MacBook Pro. So, I thought the problem must be related to the new Core 2 chips. However, we tried cloning the OS from a Mac Pro tower to a MacBook Pro, and the problem followed the cloned software to the MacBook Pro. That points to the software that shipped with the Mac Pro tower.
When we used an older config image created for the MacBook Pro (from the MacBook Pro install DVD) on the same MacBook Pro hardware, the MacBook Pro had no more kernel panics with the CiscoVPN client installed.
So, it looks a lot like the incompatibility was introduced with the Mac Pro system software.
Wayne Wilkin saw the problem with iMacs:
I, too, have experienced the same using the Cisco 4.9 client on the new iMac Duos. Same exact symptoms.
I also ran into the Cisco VPN client crashing the MacPro towers. Fortunately, these machines are to be deployed on campus so it is not an issue right now. This issue I have is that the Mac Pro Towers die (multi-lingual "You must reboot by pressing power key" crash screen) on shutdown or reboot.
I installed the Cisco VPN client (4.9.00.0050) and it consistently crashed the Mac Pro on attempts to shutdown or restart. I had to boot without extensions and then ran the uninstaller. It's a pity as I really need VPN access to my university for my work.
PDF2Office 3.0 PDF-to-Word has new architecture, 250 new features. October 2, 2006 --Recosoft Corporation is now shipping PDF2Office Personal 3.0 for Mac OS X (US$59, US $29 upgrade), a major upgrade to PDF-to-Word conversion software. PDF2Office Personal 3.0 works as a plugin to Microsoft Word.
The new version is now based on a client-server architecture. PDF2Office Desktop Server performs the PDF-to-Word conversion returning the result back to Microsoft Word. Word is no longer involved in the conversion process. The company said that this improves performance.
PDF2Office Personal v3.0 is also now a Universal Binary, native on Intel and PowerPC Macs, and includes over 250+ new features. These include:
Mac Pro firmware update fixes DMA HD access issues with Boot Camp. September 27, 2006 -- Michael Perbix says an Apple update for the Mac Pro fixes the problem of Mac Pro and DMA access to hard disks using Boot Camp:
The latest Firmware for Mac Pro users fixes the issue with DMA access to the hard drives while dual booted into Windows (ala BootCamp). You no longer need to create a special slipstream Install CD with special drivers.
Theory of kernel panic with Cisco VPN on Mac Pro. September 27, 2006 -- Glenn Reid has a theory of why there are Kernel panics with MacBook Pro and the Cisco VPN client:
We use the Cisco VPN client, and when I installed it I noticed that it was adding a kernel extension. It might be necessary to do a full install of the client, rather than to "clone" it, since it may have some logic in the installer to install something different in the Intel case.
It's also possible that the kernel extension simply doesn't work on the Intel-based Macs. I haven't tried it yet, and since I saw your post I'm afraid to try it with my new Mac Pro.
Fix for problem of VPC 7 not updating. September 27, 2006 A reader named Rich found a fix to the problem where Windows won't update in Virtual PC 7:
My problem was solved with the help of Microsoft Support directing me to delete a bunch of stuff. I updated the post I previously sent to you at Google Groups.
To read Rich’s fix, click here, then scroll down to the entry called “Windows Update fails in XP SOLVED.”
If you've tried this fix
A trio of Entourage problems. September 27, 2006 -- Michael Rose reports three problems he is having with Entourage:
I wanted to pass along a few Entourage outstanding issues in parallel to calling MS support:
Our Entourage clients (11.2.6 on Exchange 2003 SP2) are experiencing several issues related to sharing information with Outlook users via our Exchange server. There are three major problems at the moment:
1) Entourage users create or edit contacts in public folders. If Outlook users copy those contacts to a local folder enabled for Outlook Address Book use (or mark the public folder as an OAB), the users appear without Full Name attributes and cannot be used for email addressing from the Outlook Address Book. Editing the user name or otherwise modifying the contacts from Outlook allows the OAB to work normally.
2) We have several mail-enabled calendar public folders in our environment; users can invite the public folder to a meeting in order to have a generally-accessible record of the event. Unfortunately, when public folders are invited to meetings, Entourage does not display the event in the public folder (although Outlook and OWA both do). It does not matter which client was used to issue the meeting invitation -- OWA and Outlook can invite folders & see the results, so it appears to be a display/synchronization problem in Entourage. Note that this is not a resource booking problem, as the free/busy status of the public folders is not at issue as far as we can tell.
3) Since a recent hotfix (not clear when) -- An Entourage user who wishes to grant another user write access to her calendar may do so via the permissions pane for her calendar folder. However, any events that the other user creates are not visible in the Entourage calendar unless the other user marks them as "Free"; they then appear in the primary user's calendar. This also happens if the permissions to the calendar are granted using PFDavAdmin.exe, which may indicate a problem with WebDAV access to folder permissions. (This is the Bill Bryson issue reported in early August).
If you've seen these problems
StuffIt 11 is faster, adds new tools, and is universal binary. September 25, 2006 -- SmithMicro Software, Allume Division, has released StuffIt Deluxe 11.0 for Mac (US $80, upgrade US $30), a new version of the cross-platform file archiving/decompressing, encoding/decoding software.
The new version is now a universal binary running natively on Intel-based and PowerPC-based Macs. It also includes a number new features and enhancements, including:
MacBook and Boot Camp: access to HDs and controlling Cinema Display. September 25, 2006 -- Michael Perbix sent us an update to his report of last week regarding problems with Mac Pro and DMA access to hard drives using Boot Camp: He also recommends a Windows utility for controlling the Apple Cinema display from within Windows.
I did a full update to Windows XP and then re-installed the Apple drivers. I also plugged and unplugged my speakers from the back jack, to the front headphone hack back to the back jack. The RealTek HD Audio Manager actually recognized the back port and the front port, and recognized where I was plugging and unplugging from. The sound then started to work as it should.
I also found a nice utility called WinACD for controlling the Apple Cinema Display (brightness etc) from Windows.
I still have an issue with artifacting of certain colors on my 30" display. If I dumb the resolution down to 800x600 then back up to full resolution the color fixes itself until next reboot. I have yet to find a permanent solution to that.
If you've seen this fix or these artifacts
Another take on the delete alias/fix alias problem. September 25, 2006 -- Patrick White sent in another suggestion for the delete alias/fix alias file sharing problem. White says:
Regarding the delete alias/fix alias problem, I am running a mac and a virtual windows machine through parallels. I found that this approach from MacRumors worked.
I can now connect through "connect to server" and even better I have created aliases on my desktop which, when clicked, cause the mac to connect automatically to the relevant folder in the Windows virtual machine. It's much faster than using the parallels desktop tools, and you don't have to go through such a tight bottleneck as with parallels shared folders.... instead I can share my whole hard drive.
Two issues still remain for me though:
1. How to open .lnk files from my Mac
2. How to connect to the ntfs drive on my Windows exchange server
If you can comment
Cisco VPN client kernel panics on Mac Pro. September 25, 2006 -- Michael Curtis reports that the Cisco VPN Client causes Mac Pros to crash:
We have just had three Mac Pros delivered. I cloned two of them from the first one and then noticed that these two would kernel panic on a restart and not shutdown, they would immediately reboot.
I then had to install the Cisco VPN Client (4.9.00) on the first one and that did the same thing. I had already installed it on the other two.
If you’ve seen this
Skype adds video to a beta of its Mac version. September 25, 2006 Skype has released Skype for Mac 2.0 beta, a preview of a new version of the voice-over-IP software. This version ads video calling for Mac users, and can work with video on Skype for Windows. These audio and video sessions work over the Internet. Calls to other Skype users a free; calls to telephones are charged a fee.
Fix for delete/fix alias problem works. September 20, 2006 -- Peter Stonier had success for a fix we reported for the delete alias/fix alias file sharing problem.
I tried the registry fix recommended on September 5th (going from 15 to 20). Before trying if I aimed to link via SMB I would get an error -41 message. Now I can actually connect. I've been trying to do this for weeks! Still get the the delete fix/alias dialogue if I go via the Network icon, but at least I can connect! Big relief!
Mac Pro and DMA access to HD's using Boot Camp. September 20, 2006 -- Michael Perbix reports on workarounds to some known hardware problems with the new Mac Pro and Boot Camp:
I am confirming that there is a workaround for getting full DMA access to the SATA hard drives in the Mac Pro when dual booted into Windows XP (Boot Camp). I wrote this note in the Macenterprise list.
I received my new Mac Pro yesterday and set it up in the following manner: Bay 1 - OSX System drive Bay 2 - Windows Bay 3/4 - Stripped for Video work.
I did some research and saw that most people were getting slow access on the HD (PIO mode, not DMA). There are articles all over about how to fix this, here is one.
I can verify that the slipstreamed XP Pro SP 2 works and gets full DMA HD access.
I didn't have time to rearrange my desk for the new display, so I used my 19" Samsung LCD to do the install. I installed XP and did the Boot Camp 1.1 driver CD, so far so good...time to go home.
Today I moved the 30" Cinema Display over and finally had a chance to boot XP again (had to get SOME work done today) and had some strange artifacting on the display. I downloaded the new Bootcamp 1.1.1 and installed those drivers. The display cleaned up nicely but there was no sound. Supposedly users of MacPro with the 1900XT are having issues with the 23" and 30" Cinema Displays not being able to sync up with the video modes used. If you use another monitor for set-up, then use your ACD screen, it works.
Another post in the Apple forums mentioned that there is one unknown device in Device Manager (PCI Device) that you can manually update the drivers with the RealTek drivers installed by the Apple driver CD. Viola....sound...but only on the internal Mac Pro speaker, even though I have speakers plugged into the rear audio jack. I have not tried plugging into the front headphone jack yet. Supposedly you can fix this by doing all Windows updates, and then re-installing drivers from Boot Camp 1.1.1.
If you can comment on these issues
Parallels updates Desktop for Vista support, 64-bit Mac performance. September 20, 2006 Parallels today released another new build for Parallels Desktop, the virtualization software for running Windows on Intel-powered Macs.
The new version adds support for Windows Vista Release Candidate 1. (The previous Parallels Desktop update added what the company called “experimental” support for Vista. The new version also improves performance on 64-bit Macs, the Mac Pro and the 64-bit iMac, according to the company. Parallels also said the update eliminates “major bugs” and eliminates kernel panics, according to a company spokesperson.
The new version also adds a tool for setting RAM. A Parallels spokesperson explained:
In previous builds, Mac Pro and 64-bit iMac users who have machines with more than 2GB of RAM had to manually limit RAM via the command line in Terminal. In this build, we've included a tool that will help you take this action without any command line coding. With a single click you can limit your RAM and make your Mac Pro fully compatible with this build. You can easily revert your memory back at any time to the full configuration with the same tool. Its very important to note that limiting your RAM configuration to run Parallels Desktop will NOT prevent you from running any other OS X application (although they may run slightly slower). It simply helps our hypervisor "play nice" with the Mac Pro.
Groupcal upate for Entourage/iCal integration. September 20, 2006 -- Snerdware announces an update to Groupcal 3.54 ($US 55), the Mac OS X software that lets you access and manage your Microsoft Exchange calendars from iCal. The new version fixes some problems with syncing and invites, and fixes a problem that could prevent authentication. There are also other bug fixes in this release.
Parallels Desktop update adds compatibility with Mac Pro, preliminary Vista support. September 11, 2006 -- Last week Parallels released a free update of its virtualization software that will run on Apple’s high-end Mac Pro tower line. Previous versions would not run on the new Macs, which Apple began to ship this past summer.
The Parallels Desktop Update Release Candidate also adds what the company called “experimental support” for Windows Vista Beta.
The update also fixes a bug with running Solaris as a guest OS and offers better support of OpenBSD 3.8 as a guest OS.
The reader who reported the Mac Pro incompatibility to us two weeks ago told us that the update does indeed fix the problem.
More reports on Crossover Mac Beta, for Win apps w/o Windows. September 11, 2006 We’ve received more reader reports on the first beta of CrossOver from CodeWeavers, software for Intel-powered Macs that will run Windows applications in Mac OS X, without the need to install Windows.
A previous reader reported problems with Internet Explorer. Simon Visinoni found a way to fix a browser problem:
I would like to underline that I have had the same problem with surfing the web with CrossOver Beta, both with Firefox 220.127.116.11 in "Win XP bottle" mode and IE 5.0 in "Win98 bottle" mode. The problem disappeared as I killed the Microsoft Auto Update daemon in Activity Monitor (I have MS Office 2004 installed).
Another reader who wishes to remain anonymous remarks on using IE (and other apps) with Crossover:
Basically, just try other apps. IE would be a godsend, but on the dev list, they make it clear that they are not pursuing it with any real resolve, as there are so many GOOD web clients out for Mac.
Of course, there are lots of IE-only sites out there, so using the Codeweavers website's compatibility "request" tool, you can make your voice heard.
Anyway, just wanted to point out that everything with an installer* I've tried so far has worked to some degree, except IE, which they haven't really taken much of a swing at yet. Flash, in particular, renders extremely poorly right now. But, for non-IE apps, this is definitely beta-worthy (but, yeah, not production-ready just yet!).
If you've used the Crossover beta
Utility for keys and mouse functionality in Boot Camp, Parallels. September 11, 2006 -- Daniel C. told us about XP Mac Mouse Utility (US $12, free upgrades) a Windows utility that allows the use of certain keys when running Windows on Intel Macs with Boot Camp or Parallels Desktop. the utility provides a shortcut for the right click, cnt-alt-del, and screen print key,and has a multi CPU display indicator.
Another suggestion for the Delete/Fix Alias problem. September 11, 2006 -- Mark Bowyer adds to the suggestions to fix the delete alias/fix alias file sharing problem. In his situation, he is using a Netgear wireless router:
I keep seeing discussion of this problem, and especially the problem of no passwords on the network mount. I have a Netgear WGT634U, which is a wifi router with a USB port through which you can plug storage that it then shares over FTP and SMB. And it does the latter password free. You can't change that.
I spent a fair while fighting getting this to mount on my new Intel iMac Duo, before finding a solution on a web page I forget, which was to create /etc/nsmb.conf and fill it with:
This allows the SMB implementation on the Mac to access network shares without any authentication if such is offered. Having dropped that file in, it just started working - I don't think I even had to restart the service. This apparently also helps for unencrypted authentication, which is the next step up. It seems to default to encrypted login?
If you've tried this approach
Centrify web video on AD integration with Macs. September 11, 2006 Centrify has posted a half-hour web video entitled Integrating Mac OS X with Active Directory, describing its DirectControl system for Active Directory integration of non-Windows platforms.
Guest PC beta running Win works with Garmin USB. September 5, 2006 -- Paul Ronney reports doing something that has not been possible with Virtual PC: run Garmin GPS software in Windows on a PowerPC Mac. Instead of Virtual PC, Ronney is using a beta of the upcoming Guest PC 1.9.7 version from Lismore Systems. The current version is Guest PC 1.9.6. Ronney reports:
I'm happy to report that there is FINALLY a solution to the problems of PPC Macs + Garmin + USB. Guest PC version 1.9.7 beta works PERFECTLY with MapSource for downloading map files, tracks, waypoints, routes and unit software updates on an eTrex Vista C (which has a USB connection, so the serial-to-USB methods are not applicable.) No previous versions of Virtual PC or Guest PC would work. (I'm using OS 10.4 and Windows 2000.)
Reinhard Plaut is using Virtual PC, and reports the inability to do this that we’ve reported in the past.
VPC 7.02 running Window XP. When I connect my Gamin to the USB port the device manger sees the hardware but the application to update the software called Webdater can not find the Garmin GPS.
If I install the Garmin software on a PC instead of a Mac it works as advertised. It seems that there are some things that VPC will not emulate.
We also point out that Virtual PC running in Mac OS 9 was able to communicated with Garmin via USB.
More fixes for Delete/Fix Alias file sharing problem. September 5, 2006 -- Several readers sent us fixes for the delete alias/fix alias file sharing problem with Macs and Windows servers.
Daimon Beail found that the workaround we reported on August 7 did not work for him, and offered some links:
Hi I tried this and it did not work (with Mac OS X 10.4.7). I do not get the alias problem, instead it does not recognize my passwords.
Sever-end-wise these seem to work, from AllintheHead and MacOSX Hints. I haven't tried them as I don't run the server side but I forwarded it on to some others and they say it works. Reduces security a bit.
Starr Markham says that he fixed the problem by editing the server’s registry:
I eventually solved my problem by editing the registry of the XP box to increase the IRPStackSize based on this: http://www.dslreports.com/ faq/4817 and this: http://support.microsoft.com/default.aspx? scid=KB;EN-US;q177078& I initially dismissed this solution since I did not have any Norton products on the XP box. I started out with the default of 15, it failed, but I had success with 20. It does require a valid user account WITH a password.
Paul Steunebrink sent in several suggestions:
When connecting from OS X to a Win XP machine, I regularly encounter the Delete/Fix Alias dialog. This may be due to a number of reasons: 1 The Windows share is removed 2 The Win XP (SP2) firewall setting, which does not allow File and Printer sharing by default. 3 Connecting with an empty password, which is not allowed for network logon.
In case of the remove share (1) or firewall not allowing file sharing (2), the Delete/Fix Alias dialog will immediately appear when trying to connect. In case of the empty password (3), the authentication dialog will appear followed by the Delete/Fix Alias dialog.
Solutions (1) To check or fix the share, go to the folder you shared and check sharing. You can also go to Administrative Tools, Computer Management, Shared Folders, Shares to see whether the share still exists. Repair the share if necessary.
(2) To check or fix the firewall setting in your Win XP (SP2) system, go to Control Panel, Windows Firewall. Select the Exceptions tab. Check the box "File and Printer sharing" and click OK. Try to connect again form your Mac. The SMB/CIFS File System Authentication dialog should appear.
(3) A third problem might occur when you logon to your Win XP computer with an account with an empty password (no password). The Delete/Fix Alias might appear again! This is due to a Windows security policy setting that does not allow to logon without password over the network (interactively on the computer might be allowed). To fix this problem, give the Windows user account a password and use that to connect.
If you've tried any of these approaches to this problem
CodeWeavers releases CrossOver Mac Beta 1; Win apps w/o Win. September 1, 2006 -- CodeWeavers has released the first beta of CrossOver for Mac, a prerelease version of the software that runs Windows software on a Mac without Windows. Without the need to own Windows, CrossOver will be an inexpensive way to run Windows applications.
The company said that this version is still "an early test release" and "experimental software." (For more on CrossOver, see our Windows on Intel Mac reports page.)
A reader who wishes to remain anonymous tried the beta and sent this report about using Internet Explorer:
I hastened to download and install CrossOver. The first application that I want to load/run on my Mac is Internet Explorer. (I wouldn't be surprised to learn that many other testers made the same choice.) Anyway, IE 6.0 is downloadable from CodeWeavers' site (IE 7.0 does not work according to them) so I install 6.0.
Next thing I know, an IE icon appears in a Finder sub-folder under CrossOver in my user Applications folder. Pretty cool so far. Click the IE icon and it loads with the MSN home page! This is somewhat hopeful. Next I try to go to some pages that don't work properly in Safari. Less luck now. Status bar gauge half-fills and then nada.
Now I try a page on my own web site which doesn't load either so I remove some java scripts from the page and try again. Still no go. I consider the idea of deleting more code from the page but catch myself in time and conclude that CrossOver Mac is simply not ready for public beta testing.
MacBook Boot Camp problem: USB goes dead in Windows. September 1, 2006 -- We've reported this week of the widespread problem of MacBooks unexpectedly shutting down. Blogger Dan Eran hasn't seen that problem but his MacBooks are losing USB in Windows:
I set up five MacBooks running Boot Camp. I haven't seen the problem with machines shutting off, but I do have problems with USB failing on certain machines.
Three of them have no problems, but two seem to have issues with wake; they wake up from sleep, but the keyboard and trackpad are both unresponsive. The Power button will usually shut down Windows gracefully, but sometimes I have to use it to turn the machine off.
After suffering this type of stroke, one of the USB ports is also dead, but the second one, closest to the audio jacks, still works. I can plug in a keyboard and mouse and work normally (although I can't ever get the rest of USB working again in Windows; the internal keyboard, mouse and other port remain dead until I restart.) Nothing else on the machine has a problem: video and everything else works normally. It's just half the USB.
I tried swapping around RAM, which seems to have no effect on the wake crash - I used the original Apple RAM and alternative Samsung upgrade parts, but see no correlation between RAM and wake. It is somewhat hard to test because it seems to only fail on wake sporadically at first. After the first couple tries, it seems to fail all the time after that.
I also imaged the "bad OS" Windows install from a problematic machine to another one and didn't see the problem on the other machine, so I've mostly ruled a driver or user problem on the machine (i.e., a specific unique software install that was causing USB to fail on wake).
It looks like a hardware problem specific to two of the five machines, but I don't see the problem when booting into Mac OS X.
I've seen people casually mention a failure to wake from sleep, but the affected machines I have will pretty much lose their USB every time I put them to sleep.
If you’ve seen this problem
Parallels Desktop won’t run on Mac Pro; update expected. August 30, 2006 -- MacWindows readers and numerous web forum are reporting that the Parallels Desktop Windows virtualization software won’t run on Apple’s new high-end Mac Pro.
A MacWindows reader who wishes to remain anonymous reports that Parallels will release an update:
I just purchased a Mac Pro and Parallels. Couldn't seem to install Windows XP on Parallels so I purchased a support call and called them. Support person told me that Parallels Desktop for Mac does not work on the Mac Pro as of yet. They're working hard to change this situation and expect to have a version that works on the Mac Pro within several weeks. In the meantime, they will refund the money I paid for the support call.
If you’ve seen these problems with Boot Camp 1.1
I updated to Bootcamp 1.1 and had no end of trouble. It ended up booting up into Win XP and after a few seconds crashing straight back to the boot stage.
I eventually used F8 on Windows boot to get in and use Safe mode, then system restore, to eventually get back to the state it was in before the upgrade.
Still, it crashed. I eventually managed to prevent brightness.exe and the Apple time fix executable (.exe) file from autoloading.
I reckon the problem lay at the door of a conflict between ATI graphics driver and the Brightness.exe bolted on.
I have now disabled it by using Windows Defender Software explorer. Deleting it can cause more problems than it is worth. I also dumped the right click fix ( that's what your mouse is for) and the Apple keyboard support as I use smartkeys to remap the keyboard e.g remapped F12 as delete key.
The iSight camera worked perfectly but has now gone bellie up and the driver will not reinstall.
I think I will wait till Bootcamp 1.5 or so - it causes too much weeping and screaming otherwise.
MacBook shutdown problem widespread;
Apple replacing logic boards, some readers pointing to battery and heat. August 31, 2006 -- We’ve received dozens of reports from readers about the problem of MacBooks shutting down at random. Many are having Apple replace their motherboards, some more than once. Other readers report that the problem is related to batteries and battery heat, or that replacing the batteries fixes the problem. The link to heat could explain why some readers found the problem worse with Boot Camp, since Windows does not have the power management for Apple hardware that Mac OS X does.
David Mydans says “My MacBook is in the hospital getting a new Logic Board.”
Todd Jackson has had two logic boards and a slight alteration:
My MacBook has had two new logic boards in attempts to fix the random shutdown issue. With this last repair, the technician incorporated a possible fix having to do with a spacer in the case (I think first reported on Macfixit.) I pick it up today and we'll see if it works.
Diego fixed the problem with a new, cooler battery:
I was having the same problem until I replaced the battery, now it's cooler and has not shut down without warning in over a week. With the old battery it shut off completely 4 to 6 times a day.
Chris Crews found burnt plastic on his battery:
Got the same problem, no Boot Camp or Windows ever installed on this one. With all the battery news floating around out there I decided to check the battery's physical condition after one of these shutdowns and found the pungent odor of burning plastic along with several brown spots that look like arc burns between the case and battery.
I was wondering if any other MacBook owners could check for these symptoms after an unexpected shutdown.
Brandon Quintana had his battery replaced, but is not having problems with Parallels Desktop:
I have one of the black MacBooks that just came back from repair…The fan would spin up and the machine would shut down. My machine did not have the Mooing as some other people have experienced but I installed the Firmware update anyway. I was going to backup the machine before sending it into repair but then the battery stopped charging and the video died so I had the local Apple Store reformat the drive before sending it in. I received the machine yesterday and they had replaced the heatsink and gave me a new battery.
The machine appears to be functioning properly, but now I am having trouble installing Parallels Desktop with Windows XP. I think it is an issue with Parallels but at this point I'm not really sure.
Vincent Borrel in Paris sees the problem when running on battery power:
I experienced them two or three times, on battery. It seems it appears after some inactivity. It may be hardware related, since the SMC decides when the processor is not doing much and tries to put it to sleep.
I only use Mac OS X. Latest firmware and SMC. It didn't appear since I'm on 10.4.6, but may be unrelated to the change.
Moreover, I have a slight buzz, and I think I saw somewhere (not sure) that it could be related to the same problematic motherboards that exhibit this sound. I'm waiting 3 more weeks then sending the book for a motherboard exchange.
I began to notice intermittent shutdowns Friday, 8/25. Perhaps two occurred with an hour or two in between. Starting the next morning the shutdowns began in ernest. I began to backup everything manually, directory by directory, as shutdowns would occur with such frequency that the entire backup process would never finish. By the time Apple had been called the shutdowns had occurred about 10 - 15 times over 3 hours.
The machine left Las Vegas that afternoon 8/26, for Memphis. I received it the following Tuesday, 829. The trackpad had been replaced as requested. Nothing else had been touched.
I am presently using the machine and hope to get back to work without incident. We shall see.
Matthew started a blog on the MacBook Random shutdown problem.
MacBook shutdowns may not be limited to Boot Camp. August 29, 2006 -- Several readers say that the problem of MacBooks unexpectedly shutting down, which we reported yesterday as a problem with Boot Camp, also occurs without Windows.
Grant Davis sees the problem on machines without Boot Camp:
We've got a MacBook that just shuts down--dies completely--whenever it feels like it. Restarts OK and runs for irregular periods. We've upgraded to OS 10.4.7 and the Firmware upgrade that stops the Mooing fan but it still does it: pow, gone black screen. No Boot Camp installed either so it sounds like an odd hardware fault with some machines.
Bob Savage sees it with both Windows and Mac OS X on Intel Macs, but Windows is worse. He also finds that battery heat prevents Windows from loading:
I am seeing the problem with shutdowns with MacBook Pro. I also have Boot Camp and the problem might be worse when booting into Windows, but it seems to occur when OS X is loaded as well (although it takes longer to occur). There might be a connection to heat, but I don't think it has anything to do with the battery. I've noticed that, if I leave the notebook plugged in (but not booted up) the rear of the computer (behind the battery, and close to the hinge) gets and stays hot. In this condition, Windows cannot successfully load, however unplugging the computer for a while allows it to cool off. I can then use it for some time (even under Windows) without the problem.
I haven't worked out the timing on everything (the problem seemed to get worse, but now that I think there is a connection to being plugged in, I would want to observe in relation to a COLD start).
Pete Lavergne thinks it might be bad RAM:
Run the Apple hardware test for the memory.
Richard Lorrain sees it only with Boot Camp, as did yesterday’s reader:
I do experience the same thing with boot camp. Unfortunately, I'm not a geek, I can't help you guys. Glad I am not the only one.
If you’ve seen this issue
Fix for Outlook-to-Entourage text character mangling. August 29, 2006 --Geordie Korper, Group Logic’s ExtremeZ-IP Support Lead, sent us a fix for a problem we reported yesterday where Outlook characters in email don't translate to Entourage. Korper said:
Windows uses a slightly modified version of the standard Western European (ISO/IEC 8859-1) character set. The Windows version is properly called Windows-1252. The problem is that Outlook labels the text "Content-Type: text/html;charset="iso-8859-1" even though it is using Windows-1252 and then Entourage tries to interpret it as such. However, Entourage will properly interpret the characters if you choose "Western European (Windows)" from the Format->Character Set menu.
Markian Hlynka agreed that text encoding is the source of the problem:
This sounds like an encoding problem. Windows is really good at lying about text encodings. If you set the encodings to utf-8/ unicode, the problem should go away PROVIDED Windows respects the setting. Of course, the original keystrokes may no longer work; they may have changed!
Michel Paris of Montreal, Canada found that upgrading to Tiger 10.4.6 fixed it:
I've had the same problem for years with emails showing "fraction-like" characters from PC from outside our company (Oddly enough, those coming from PC inside the company were showing up just fine). Even weirder was that doing a reply would cause the message to be displayed correctly in the reply window.
The issue was with 10.2.x and 10.3.x. Upgrading to 10.4.6 solved the problem.
I have seen this problem on several of my Mac users here at our office. The fraction problem is the most frequent, and they usually appear as the "pi" character. We're running Mac OS X 10.4.7 and Entourage 11.2.5.
Brad Allen notes that he does not see the problem:
We could not duplicate this problem when sending from Outlook to Entourage using the following formats: HTML, Rich Text, and plain text. We are using current versions of both clients with an Exchange server (which I assume is also current, since we are just at the beginning of migrating from Lotus Notes/Domino to Exchange).
Helios ships servers for Intel Mac servers. August 29 -- Helios Software today announced that its Helios UB server software line is now available for Apple’s new quad-core 64-bit Intel Xeon Mac Pro and Xserve.
The company said that the servers software uses all four CPU cores in the Intel-powered Mac servers. The UB server line includes EtherShare UB, PCShare UB, WebShare UB, ImageServer UB, PDF HandShake UB and PrintPreview UB,
WebShare, EtherShare, and PCShare (cross-platform file sharing and print serving and remote admin for Mac, Windows and Web clients). ImageServer, PDF HandShake and PrintPreview are used for design, prepress and printing operations.
Article: How Boot Camp Works. August 29, 2006 -- Tech writer Daniel Eran Dilger offers an explanation of How Boot Camp Works at his web site, Roughly Drafted.
Fix for Win files placed on AFP shares invisible to Macs. August 28, 2006 -- Craig Overboe found a quick solution to the problem of Windows files on AFP shares becoming invisible to Macs:
We moved our existing Mac shares from a Windows 2000 to a Windows 2003 server and ran into the issue. We found a resolution that worked for us. We had to create the Mac shares on the Windows 2003 Server before any files were copied to it.
What we did originally was make directories, copy files into those directories (and one we did a file restore to), then created the Mac and Windows shares. Whenever someone saved a file to this location with a PC the file wouldn't show up on the Mac. To get the Macs to see the file they had to connect with SMB.
What we did to resolve this is:
- Unshare the folders.
- Create a temporary folder on the same drive.
- Move the files from the old folder to the temporary folder (Windows cut/paste).
- Delete the old folder.
- Re-Create the old folder.
- Re-Create the share.
- Move (Windows cut/paste) the files back into the old folder.
We could then copy, modify, delete, etc files with the mac or pc.
As a test to our theory, we tried moving the files back into the old folder then re-creating the share and the problem was back.
This whole process takes less than 5 minutes considering Windows just changes pointers when you do a cut/paste. We had found postings of problems like this with large volumes, but this resolution doesn't seem to matter on the size of the volume considering our volume is 1 TB.
If you’ve tried this approach
Intel MacBook pro shuts down randomly when loading Windows and stops seeing USB devices at random times, etc.
When booting from Windows XP a MacBook pro using Boot Camp, sometimes Windows will start to load and then the computer will completely shut down for no reason.
Other times, when Windows is running, it randomly will stop "seeing" the USB keyboard or other USB device and/or when a USB device is accessed (like my scanner in Photoshop), other USB devices will stop being "seen" by Windows or computer will just shut down randomly or hang and stop responding.
If you’ve seen this issue
I have a client who uses Entourage with an Exchange server. When clients send him email from PCs (I assume from Outlook), they often use characters he can't recognize. The most egregious example is fractions: "1/2" on the PC translates to "≤" on the Mac, for example.
I can't find any information on this specific problem. If I could at least find a table of which characters on the PC become which characters on the Mac, I could at least make my client a Decoder Ring.
If you’ve seen this issue
Entourage Email Archive goes Intel-native. August 28, 2006 Softhing has released Entourage Email Archive X 2.4 (EEAX), a free update to the application that can archive and backup Entourage email and attachments. EEAX can archive messages in native Entourage format, letting you do a drag-and-drop restore. Other export formats are also supported. EEAX archives are searchable by Spotlight.
Verion 2.4 has some improvements with moving Entourage Email into FileMaker databases, and now supports Unicode.
EEAX 2.4 requires only with Entourage 2004 on MacOS X 10.4 or later on PowerPC and Intel Macs.
Apple Boot Camp 1.1 beta fixes keyboard issues. August 27, 2006 -- Earlier this month, Apple released Boot Camp 1.1 Beta, the second version of the pre-release software for booting Macs with Windows XP.
The new version adds support for the Delete, PrintScreen, NumLock, and ScrollLock keyboard keys from within Windows. It also interprets the right-hand Apple key on Apple keyboards as a right click. Beta 1.1 adds support for built-in iSight cameras and microphones.
what you think of the new version.
TIP: Fixing applemou.exe for Boot Camp right-clicks. August 16, 2006 Several readers wrote in with a solution to a problem with the applemou.exe utility. The utility runs in Windows in Apple’s Boot Camp, to add the right-click functionality that Boot Camp lacks. The problem was that the utility brings up a splash screen every time Windows boots up.
Heydar Adel gave the short answer:
I installed applemou.exe and it works perfectly. You can use the "/s" command to make the pop-up go away.
Normand Despins of Quebec City, Canada, provides more details:
Here is the solution to get rid of the splash screen at boot time: Instead of putting applemou.exe in the Startup Folder, put applemou.exe into Program Files (C:\Program Files) and create an alias of the application. Put this alias into the Startup Folder (C: \Documents and Settings\Yourusername\Start Menu\Programs\Startup). Now go to the alias properties and add /s (space /s) after the path in the field labeled Target: You must add a space /s just after the last quotation marks.
Jason Stevens agrees:
Per the docs that come with it, the /s switch makes it run without bringing up the window. You can add that switch to a shortcut, in its Properties window. So, I put applemou.exe in Program Files, made a shortcut, added the /s (which must be done after the quotes) and put that in the Startup folder. Works great!
Win on Mac by VMware, Parallels, and Microsoft. August 16, 2006 -- In a story at eWeek, MacWindows editor John Rizzo looks at the new competition between startup Parallels and virtualization heavyweight VMware, and Microsoft’s decision to drop Virtual PC.
Fix for Windows not updating in VPC 7. August 16, 2006 --Elton Turner send us a fix for the problem of Windows not updating in Virtual PC 7:
I had the same problem and a few more with VPC not updating and not connecting to certain websites. After searching about for help, I found a reference to some PC software that helped solve the problems. I am running OS X Tiger (10.4.7), VPC 7 (latest version) and am connected to the Internet via DSL.
Find and install Dr.TCP in Windows. Set the MTU values to 1300. It is okay to use both the Macintosh firewall and the Windows XP firewall I recommend running them both for security reasons.
Once everything is running correctly, I also recommend saving a copy of the Virtual PC list (located in the user’s personal Documents folder), because Windows XP frequently loses it bearings, and this copy can be used to immediately restore VPC7 back to its last known good working condition. (Anything added to Windows since the copy was made will be lost, of course, but at least it runs again.)
Several other readers confirmed the problem in our original report. We've posted these new responses on our Virtual PC 7 Reports page.
We've got G5 machines running on a Windows 2003 network. They were bound to the domain and everything was working splendidly. When we retired our old Primary Domain Controller, we were unable to log into a Mac with an Active Directory account. If we log in with a local account, we could browse the Internet, see all network resources: We could even connect to shares on Windows PCs and authenticate using AD accounts. If we tried to unbind, we got an "unable to access domain controller" error.
Forcing the unbind worked, but trying to re-bind generated the same error. 10.4.4, 10.4.5 and 10.4.7 all generated the same results. I wiped clean and installed Tiger fresh on a machine to no avail and I even moved to a couple different locations just to eliminate a switch or fiber connection as the culprit. None of this made a difference. I checked the registry and Group Policy settings mentioned in the August 17, 2005 post here and found that the server already had those settings.
Finally, I found the culprit: On the Domain Controller, go to Start Menu/Administrative Tools/Domain Controller Security Policy. Once that opens, go to Local Policies/Security Options and look for the policy named "Domain Controller: LDAP server signing requirements" We had it set at "Require Signing" so I tried setting it to "Not Defined." My results were the same. However, after changing it to "None" and refreshing the policy, everything is back working normally again. One related note- if you have multiple DCs, you'll want to do this for each in case the PDC goes down (which is what started this whole mess for us).
If you've tried this
While looking for information at MacWindows about Entourage for a new user, I decided to see if others were having issues with Outlook 2001. Here is how I have it working flawlessly in classic on Panther or Tiger.
1. Create a disk image of appropriate size (typically I choose 40MB)
2. Install Outlook 2001 to the newly created and mounted disk image
3. For machines with multiple users: -Place the dmg file in the shared users folder (verify its permissions as available to all) -Add an alias to the dmg file in the users Login Items so its automatically mounted at login
4. Printing in Outlook will require the setup of a printer in Classic using the Desktop Printer Utility
That's basically it. Having Outlook run from a disk image (where the OS will ignore permissions) will allow the creation of the necessary hidden files by Outlook. As long as your OS X network settings are correct you can use the common name of your exchange server when creating the profile.
If you've tried this fix
For more on using Outlook 2001 in Classic, see our Outlook 2001 reports page.
Timbuktu Pro upgrade pricing. August 16, 2006 -- In a previous post, a reader reported that Netopia did not offer upgrade pricing for Timbuktu Pro. The company responded, saying there is upgrade pricing, available through netopia.com.
End of the road for Virtual PC; MS will not port to Intel Mac. August 9, 2006 -- Microsoft, once the undisputed owner of the Windows-on-Mac market, announced that it will not port Virtual PC to Intel Macs.
Virtual PC only runs on PowerPC Macs. Microsoft said that it would continue to offer product support to current VPC customers. It is not likely, however, that the company will offer any further upgrades.
The company made this announcement in the wake of VMware’s declaration to enter the Mac market on Monday.
Microsoft gave as a reason the difficulty in porting the software:
Developing a high-quality virtualization solution, such as Virtual PC, for the Intel-based Mac is similar to creating a version 1.0 release…
Parallels told MacWindows that it ported Parallels Desktop from its x86 Windows version in three months. Microsoft already has an Intel version in the form of Virtual PC for Windows.
Microsoft said that it was happy to sell copies of Windows to Mac users, and:
…confident that alternative solutions offered by Apple [Boot Camp] and other vendors, combined with a fully packaged retail copy of Windows, will satisfy this need [to run Windows applications on Macs].
One advantage that Microsoft could offer that noone else could is a preinstalled implementation of Windows bundled with the virtual machine software.
Office will go Intel, but will lose VB scripting. August 9, 2006 -- Microsoft announced that it was proceding with Intel-compatible (universal) versions of Microsoft Office, Remote Desktop Connection, and Microsoft Messenger for Mac. The next version of Office, however, will no longer support Visual Basic scripting. Microsoft said that Mac users will have no access to VB scripts:
Although VB macros within files will not be accessible and cannot be viewed or modified, the files themselves can be edited without affecting or changing the macros.
Parallels says it will beat VMware to Vista on Mac. August 9, 2006 -- At Apple’s WWDC on Monday, VMware demonstrated a pre-beta version of VMware for Mac OS X running the Windows Vista beta and full support for USB 2.0 The company said it would ship a beta of its first Mac product later this year. It did not say when the final version would be ready.
Yesterday, Parallels told MacWindows that it would ship a released version of Parallels Desktop that supports Vista and USB 2.0 before VMware shipped its beta.
Both Parallels and VMware would follow iEmulator, an open source-based virtual machine application can already run the Windows Vista beta 2 in a virtual machine. iEmulator does not yet support USB 2.0, and has been reported to run more slowly than Parallels by MacWindows readers.
VMware does not yet have a shipping product or even a released beta. The company told MacWindows that it would release beta software in a “phased” manner, starting with a non-public beta in a few weeks, following with one or more public betas later in the year.
Parallels has been shipping Desktop since mid-June. Yesterday, the company offered a beta update that added a number of improvements. (See news item below.)
Parallels beta update adds speed, improves USB, keyboard. August 9, 2006 At Apple's WWDC in San Francisco, Parallels announced what it calls a beta update to Parallels Desktop. The beta update is available now as a download. The company said that a final version of the update would be available in a week or so from the software’s update feature.
Among the improvements:
Simon Visinoni sent a positive review of the update:
I just downloaded and installed the new Beta of Parallels, release 1862.
- I needed to reboot OS X for having BT/EDGE DialUp Connection -> EN2 working as before.
- The boot time is shorter.
- Graphics benchmarks are just 10-20% faster despite moving filled windows is much smoother. This before and after re-installing Parallels Tools and the video driver version is still 18.104.22.168. I believe this depends directly from PDM's engine
- Shared Folder GREATLY faster.
- I can't tell about USB devices because I don't have them with me. Before this update I needed to unplug and replug the USB's Hub into the Mac while PDM running in order to print. I'll check this issue later.
The "install Parallels Tools" menu item is not grayed out like in previous versions (at least) on my Kubuntu/Linux VM, but selecting it brings just the CD-ROM icon to appear on the desktop. As this functionality is not mentioned in the release notes I think that is a feature they just started to implement.
Conclusions: nice improvements, especially on Shared Folders.
VMware announces an x86 virtualization product for Intel Macs. August 7, 2006 Today, VMware announced that it would ship a Mac version of its virtualization software later this year. The company will demonstrate the software today in San Francisco after Steve Jobs' keynote address at Apple's Worldwide Developers Conference (WWDC).
VMware said it would be running a beta program for VMware for Mac. The company said with would run any x86 operating system within Mac OS X on Intel Macs, including Windows, Linux, and NetWare. VMware for Mac will be able to run virtual machines created on other platforms. Mac users will also be able to move virtual machines created on the Mac to other platforms.
VMware, the leading vendor of virtualization, will be a formidable competitor to Parallels Parallels Desktop. VMware for Mac might include support for Windows Vista and USB 2.0, both of which are currently not supported by Parallels Desktop. Last week, however, InfoWorld's Tom Yager said that Parallels Desktop would run Windows Vista and support USB 2 by the end of the year.
VMware at some point may also announce a server version of VMware for Mac, to run on Apple’s Intel-based servers, which Apple announced today.
Apple completes transition to Intel. August 7, 2006 At WWDC this morning, Apple moved it's two remaining PowerPC Macs over to Intel Processors. The new Xserve and the Mac Pro (which replaces the Power Mac G5) will include two dual-core Intel Xeon processors, up to 3.0 GHz.
Apple stock option scandal casts shadow over WWDC. August 7, 2006 -- On the eve of Apple's unveiling of Leopard, the next Mac operating system, investors drove the company's stock price down on fears that a growing stock option scandal might reach CEO Steve Jobs. New information also came to light today, during Steve Job's keynote.
On Friday, Apple's stock dropped 1.9 percent, a day after Apple said that it would restate its past earnings in light of "irregularities" with employee stock options. The company also said that it will delay filing its next quarterly earnings report. Apple first mentioned the possibility of a problem in June.
The San Francisco Chronicle reported on investor concerns:
…improper handling of employee stock options might erase some of Apple's past profits or, even worse, plunge its renowned CEO, Steve Jobs, into a legal morass...
Today, the Washington Post reported that options grants to Apple executives at were dated just before stock prices rose sharply.
The irregularities, which have to do with backdating of employee stock options, is one that has recently landed executives of other companies in trouble with the U.S. Justice Department. Last month, Gregory Reyes, the former CEO of Brocade Communications Systems, was charged with federal securities fraud for backdated employee stock options. The Securities and Exchange Commission and the U.S. Attorney's Office said that he could receive 20 years in prison and $5 million in fines.
Analysts are also concerned that Jobs might not be the only high-level Apple personality implicated. The Associated Press reported:
Depending on the nature of the possible stock option abuses, class-action lawyers and prosecutors could target Apple's board for alleged misconduct.
The Apple Board of Directors includes former Vice President Al Gore and the CEOs of four other major corporations.
Fox News reported that Apple has hired an outside law firm to do an internal investigation, and that Apple will disclose the findings to the Securities and Exchange Commission.
Workaround for Delete/Fix Alias file sharing problem. August 7, 2006 -- Frank Dobbelaere sent in a simple method of ending the delete alias/fix alias file sharing problem:
If you've seen this problem
If I connect via Go > Connect to Server > CIFS://192.168.1.77 I can give my password, select a share and mount the NAS drive. Mysteriously enough, after that I can connect to it via Network in the sidebar without a problem. Disconnect & reconnect both work fine. Even after a logout and a restart, I can log on nearly instantly without the alias problem.
I'm quite pleased with VPC 7.0.2, but the only real problem I have is that Windows update won't work and I can't log into MSN, I think the 2 are related. Other Internet browsing works fine. I have left the network settings as default and have ALL firewalls off.
Web browsing seems fine in both Explorer and Mozilla. My web access seems as fast as the host Mac's.
If you've seen this problem
Tales of Timbuktu Pro in file sharing. August 7, 2006 -- Several readers responded to last weeks' report about using the Timbuktu Pro remote control/file sharing software to overcome file sharing problems. While last week's reader used Timbuktu on a home network, some are using it on office networks. David O said:
I also use Timbuktu on both Mac and PC to exchange files and control computers, sometimes on other continents. It's a great solution when LANs don't work they way they should.
Nelson uses Timbuktu and Skype:
We use the potent combo in our all-Mac accounting office and it works wonders for me as I can keep all the Macs updated while I'm at home working (playing).
Troubleshooting is a snap as I can completely take over any computer in our office.
The reason I went this route is to avoid all the port forwarding and network hocus-pocus that is required to get VPN to do the same thing.
TB2/Skype solution is simple, secure and reliable. Everybody understands it. And besides that, Skype is a useful application in its own right.
Not everyone's router is accessible. Ours is downstairs in the dungeon amidst all the other networking equipment and we don't have ready access. Screwing around with the router is not an option. So we tread lightly when it comes to configuring and troubleshooting any and all network-related issues.
Dick Sampson points out there is no bundle pricing for the size of his home network:
I’ve used Timbuktu on the Mac and PC for many years before OS X and found it amazing. However, when Mac OS X came out, Timbuktu had to be upgraded. I have 5 Macs and two PC’s on my home network so I would have to buy a ten pack cross-platform version license costing $699.95. Way too expensive for a home network solution. There are only Twin Pack, Ten Pack and Thirty Pack licenses available so there is no in-between option.
I would love to use Timbuktu Pro again because it offers so much in being able to control any computer on the network and access anything on that computer. I especially liked the ability to access my computers at home from work via the Internet, a great solution to solving a home computer problem for my family when I was at work.
NOTE: Netopia does offer upgrade pricing, as described at netopia.com.
New Checkpoint VPN client finally Tiger compliant. August 3, 2006 -- Checkpoint now has a Tiger-compliant VPN client. When Apple released Tiger in April of 2005, it immediately broke third-party virtual private network clients.
At that time, Checkpoint told us that it would have a Tiger-compatible version of its VPN-1 SecureClient in May. Over a year later, it looks like Checkpoint has released a Tiger-compatible version, one that is also Intel compatibile.
Reader Philip Sturman reports:
Securemote (VPN) update may fix problems with 10.4 Tiger
There seems to be a new version of VPN-1 SecuRemote/SecureClient out that supports 10.4 Tiger. Well, it took a bit longer than May 2005 for them to fix it, but they have made it a universal binary as well now. I haven't had a chance to try it out myself yet, but according to comments in different forums it seems ok. It's available on the Checkpoint download page. It's still named R56 for some reason.
Delete/Fix Alias file sharing problem seen on Linux SMB server. August 3, 2006 It seems that the Delete alias/fix alias file sharing problem is not limited to Windows servers. Frank Dobbelaere sees the problem with a Linux server:
This problem occurs on my LAN without a Windows machine or share. I get the same issue when connecting from Mac OS X to a shared network drive on a Linksys NSLU2 (an Ethernet NAS device that shares up to two USB hard drives). It runs some type of Linux and formats the drives as ext3.
On the Linksys side everything is OK according to the status screen, log and manual.
I have no idea what OS X's problem is. I can't say if it is a Tiger or 10.4.7 issue, as I just purchased this little box.
Henrik Boes provided some additional data on the problem:
We have run into this issue at our agency a few times. My digging around showed that the Windows server erroneously showed the particular user as still being logged on. In essence the issue appeared to have been a "busy signal" from the server. Logging off the user using the Windows 2000 user management console fixed the issue. I don't recall if a restart of the Tiger client system was needed or not.
Interview with solutions execs for Windowless Windows on Mac. August 3, 2006 -- In an eWeek article, MacWindows' John Rizzo talks to executives at CodeWeavers and True North Technology about their solutions for running Windows applications on Macs without having the Windows operating system itself on the Mac. (See our Windows on Mac Reports page for more on the products, CrossOver and Northstar.)
PC-Mac-Net FileShare 6.1 adds encrypted net backup. August 3, 2006 -- Lava Software has released PC-Mac-Net FileShare 6.1 (US $15 per computer), a free update to its peer-to-peer, cross-platform file sharing, data backup, and remote media player product for Windows, Mac OS X, Mac OS 8/9, and Linux.
New features adds data encrypted storage of backup data on networked computers (including the Internet) and encryption key recovery to its backup functionality. The backup destination can now be to multiple computers on a network or the Internet. There is also now email notification of completed backup, increased backup speed, reduced CPU utilization, and a number of other new features.
Missing Sync for Windows Mobile 2.5.1 smoothes syncing. August 3, 2006 Mark/Space has released the Missing Sync for Windows Mobile 2.5.1 (US $40, free update), an update to the Mac OS X/Windows Mobile 5 syncing tool.
The update addresses some performance issues with certain devices. It fixes USB performance problems with the Motorola Q and other devices. The 2.5.1 update fixes a connection problem with some Windows Mobile 2003 Smartphone devices. It also improves fast syncing of recurring events and has better handling of multiple email addresses in Entourage.
The Missing Sync for Windows Mobile 2.5 and 2.5.1 requires Mac OS X 10.4x Tiger.
Entourage shared calander workaround works. August 3, 2006 -- Paul Ukena verified a workaround we reported to the problem with changing Entourage/Exchange shared calendars:
Many thanks to Bill Bryson for his fix. Changing the status to Free worked for us, and I now have several very happy secretaries, who don't mind the extra step involved since it fixes the problem.
Reader uses Timbuktu Pro for cross-platform file sharing at home. August 3, 2006 -- Robert Sundquist describes why he uses the cross-platform Timbuktu Pro program to overcome some file sharing issues at home:
I have my Mac G5 and a Windows computer together on the same desk and my wife’s PC upstairs, and I find it interesting that I can’t access the Windows network from the Mac, but I can access the Mac from either PC, but, of course, only my Mac’s Home folder.
I get around all this by having Timbuktu Pro on all three of my computers. Through Timbuktu’s Exchange function, I can see the entire hard disk of the PC on the Mac and even better, I can see not just my Mac’s Home folder from the PCs but also the rest of the boot drive as well as the entire second internal hard drive of the G5. This makes it easy to, say, copy music files I have on the second hard disk to the PC, which I couldn’t do with normal Windows networking. I originally purchased Timbuktu to control my wife’s computer upstairs when she had a problem, so I wouldn’t have to keep running up and down the stairs, but have found it very versatile for networking, instant messaging, and its intercom function as well.
If you’ve use Timbuktu Pro with Macs and PCs
More on the Delete/Fix Alias file sharing problem. August 1, 2006 -- Several readers responded to last week's reports of a file sharing problem with mounting a Windows SMB volume. The user is asked to delete or fix an alias, but can do neither.
Last week, we reported some suggested workarounds. However, checking through our archives, we found that two years ago, users were having a similar problem with Panther. On our Panther Reports page, a user offered a workaround in the form of an AppleScript to mount the volume. If you’re now seeing this problem in Tiger, and are willing to try out the old AppleScript workaround .
Simon Corston blames his Windows XP machine because the problem temporarily disappeared when he reinstalled XP:
I have a Mac Mini connected to a Windows XP machine via a local network. I can see the Mac Mini in Windows Explorer. However, if I try and connect to the shares available on the Windows PC from Mac OS X it refuses my connection with the following error: The alias xxx could not be opened because the original item could not be found.
There are two buttons to Delete Alias and Fix Alias. Neither works.
When I tried to Delete Alias and it says I do not have the privileges. I have tried Fix Alias and it wants me to choose the alias to delete, but I don't know where it is located.
It turns out that Windows XP was so corrupted that it would not even boot up. I had to do a clean (parallel) install of XP and recreate all the user profiles and reinstall all my software. This initially resulted in the connections from the Mac to work as they should. So clearly the problem is at the PC end. Unfortunately, things didn't stay good for very long. I can no longer print to the shared printers on the PC. This always used to work. I can open shared folders OK from the Mac, but I can only see the contents of one of those folders! I do not get any error messages on the Mac when trying to open these folders any more - just no contents.
Like all those others, I, too, get the Delete/Fix Alias message when trying to access a Windows network from my Mac, even between my three computers at home, behind my router/firewall.
I see this same thing ALL THE TIME using a MacBookPro 17” and Mac OS X 10.4.7.
Problem with changing Entourage/Exchange shared calendars. August 1, 2006 -- Thomas Francais confirmed a workaround we reported to the problem with changing Entourage/Exchange shared calendars:
In reference to Bill Bryson's workaround posted July 20, 2006: I can confirm his workaround allows Entourage to save changes to another user's calendar.
SnapMail 4.4 email/file transfer program gets faster. August 1, 2006 -- Glass Bead Software has released SnapMail 4.4, an update to the company’s cross-platform office communication software. The secure email and file sharing software can work with Macs and PCs, with or without a server.
The new version improves the speed of message delivery and enhances the software’s autoresponder feature
Reports, suggestions on Tiger "Cannot Fix Alias" file sharing browsing error. July 27, 2006 Readers reacted to our report earlier this week of a file sharing problem with Tiger that produces an error message about aliases when browsing a Windows server. Some readers also sent in suggestions.
Michael Holst says that using Connect to Server helps avoid the problem:
I just got a MacBook, upgraded to 10.4.7, and also get the dreaded alias problem when browsing the network, every single time.
I have been able to connect with the Go menu’s Connect to Server + IP option in the Finder largely with success. Although failures do occur, adding the actual share name might help.
In case nothing works against an XP machine, one of the culprits that is largely to blame with SMB file sharing, is usually the WIndows Firewall, This will give you problems even between Win machines. Try disabling it, and try again.
Steve Clayton has another suggestion:
I was chatting to a Windows expert today who stated this problem is when Windows 2003 Server is running Active Directory and has ssl enabled on the group policies.
Other uses also reported the problem.
I've seen both the "Delete/Fix Alias" error and password/name is incorrect consistently. I'm also trying to bind my machine to a Active Directory domain. Initially, it seem to speed connections, but I think it might have corrupted my loginwindow.plist.
Have seen file share error in News update July 25th , using OS X1 0.4.7
I've had a problem with Tiger giving me "Cannot Fix Alias" error when connecting to certain Windows shares. Sometimes it works fine, other times it doesn't.
My Ti Powerbook 800 running 10.4.7 exhibits the same problem as described by Ramon Richie. Any attempt to connect to a Windows XP Pro share is rewarded with the Delete/Fix Alias screen.
If you know of a workaround
Mac users can now sync to Windows Mobile 5 devices. July 27, 2006 -- Mark/Space has released The Missing Sync for Windows Mobile 2.5 (US $40, free upgrade from v2.0), the first version of the Mac OS X syncing software that enables Mac to sync to Windows Mobile 5 handheld devices and smartphones. These include the Cingular 8125, the Motorola Q, the Palm Treo 700w, and the T- Mobile MDA Vario device, among others.
The software The Missing Sync can synchronize contacts, calendar events and tasks. The upgrade improves syncing with Address Book, iCal, and Microsoft Entourage 2004. The new version is also a Universal binary that runs on natively on Intel and PowerPC Macs.
I still get this dreaded "Delete / Fix Alias" message when browsing to a Windows share (even on a WinXP Pro machine) or that the password/username is incorrect when I use the connect... smb://ipnr option.
I started with 10.4.3 on this laptop and sometimes wish I had never upgraded. Not that you can do anything about it, but I'm really starting to hate Tiger in this regard. Stuff that's working fine on Panther is broken time and time again on Tiger. Running 10.4.7 now on a TiBook 400.
As a solution I just end up using FTP for transferring stuff. Since the network administrators at work don't want to know about Macs, there is no way they are going to change anything so that "faulty" Tiger can connect.
If you've seen this with Mac OS X 10.4.7
Maintenance upgrade for Groupcal, Entourage/iCal integrator. July 25, 2006 -- Snerdware issued Groupcal 3.53 (US$55, free upgrade) an upgrade to its program for using iCal to access and manage Microsoft Exchange calendars. Enhancements include:
Helios LanTest goes Intel Mac and 10 Gig Ethernet. July 25, 2006 Helios’ free LanTest and File System Test utilities now run on Intel-powered Macs. The utilities measure performance and compatibility, and run in Mac OS X. Groupcal 3.53 requires Mac OS X 10.4 or later.
HELIOS LanTest now has testing configurations for Ethernet/DSL, Fast Ethernet, Gigabit Ethernet, and now 10 Gigabit Ethernet. The software can create, open, and deletes files, conduct read/write throughput tests, measure print and spooling performance, among other things.
HELIOS File System Test can help determine Mac OS X incompatibilities of a file server, and includes 11 tests with AFP, SMB/CIFS, NFS, and WebDAV file sharing protocols. It also looks at large file sizes, long file names, access rights, and other parameters.
Absolute laptop theft recovery software ported to Mac. July 25, 2006 -- Absolute Software has released a Mac OS X version of Computrace LoJack for Laptops (US $50 per year), a laptop security tracking solution that locates and recovers lost or stolen computers. Computrace LoJack consists of a service and software that runs on both Intel and PowerPC-based Macs.
If the computer is lost or stolen, the software secretly contacts Absolute's Monitoring Center when the computer connects to the Internet and reports the laptop’s IP address and other networking information. Absolute will work with local law enforcement to locate and recover the computer. Absolute Software will refund the cost of Computrace if the computer isn’t recovered in 30 days.
BixData ports server monitor suite to Mac. July 25, 2006 -- BixData as released a Mac OS X version of its cross-platform BixData server-monitoring suite, for Intel and PowerPC Macs. The suite provides monitoring, notifications, and detailed reports of the behavior and performance of servers, including Mac OS X Server, and server clusters. It runs natively on Windows, Linux, FreeBSD and now Mac OS X.
There are three parts to the suite. BixServer for Mac OS X can monitor Linux and Windows servers. BixAgent adds more detailed monitoring of running software and hardware, including hundreds of native OS X data valuest. BixDesktop is the management console and user interface.
After installing MSN Messenger, the customer connects to Exchange Server, appears to sync email. After a few minutes, error message says error-logon failure-bad user ID or password-do you wish to retry? If you ignore the message, you can see in the background files indicate they are being updated (but they aren't).
When all the MSN Messenger files and preferences, and the office notification preferences, are removed, and the Entourage database rebuilt, all is OK. The files I removed are listed below (I am sure they all don't need to be removed, but one of them is the culprit):
Mac G5 with 10.4.7/Entourage 11.2.4/Windows Exchange server MSN Messenger (current download from Mactopia).
This doesn't appear to be related to the Entourage logon problem described on our Entourage Reports page.
If you've seen this problem
Workaround for problem with changing Entourage/Exchange shared calendars. July 20, 2006 -- Bill Bryson found a workaround to a problem with changing Entourage/Exchange shared calendars:
Ever since we applied the last security patch to Exchange in late June, Entourage users who had been granted "Editor" (write) permission to other shared Exchange calendars no longer are able to update events on the shared Exchange calendar properly (unable to sync).
I have since determined the following:
1) Entourage users currently can NOT place calendar events marked as "busy" on a shared calendar if the event is in the current month (July) or the following two months (August and September).
2) Events marked as "busy" CAN be synced to the shared Exchange calendar if the events being added/updated are in the past (before July) or more than two months in the future (October or beyond).
3) If an event is marked "free" using the Options toolbar button when adding the event, it can be added to the shared Exchange calendar regardless of its date.
It appears there is an access permission problem related to the update of the free/busy database used by Exchange with the latest Exchange security update in place. We have a clustered front/backend Exchange environment. We were not able to replicate the problem in our test Exchange environment which is non-clustered front/back end.
Workaround: We have determined Entourage users can access a shared Exchange calendar if delegation is used to grant access rather than just sharing permission setting.
If you've tried this workaround
Prosoft NetWare Client 2.0 supports Intel Macs, new features. July 20, 2006 -- Prosoft Engineering has released NetWare Client for Mac OS X IP Edition 2.0, a new version that is now native to Intel-powered Macs (a Universal Binary). The Client connects a Mac to a Novell Network using the IP protocol.
There are also server new features in the client, including:
Which Macs will Leopard leave behind? July 20, 2006-- In his latest column, eWeek's David Morgenstern speculates on which older Mac models won’t be supported by the upcoming Mac OS X 10.5 Leopard. Steve Jobs will preview Leopard at the Apple Worldwide Developers Conference in August.
Review of iEmulator on Intel Macs. July 20, 2006 -- At his MacNightOwl web site, Gene Steinberg reviews iEmulator 1.7.9 running on an Intel Mac.Steinberg refers to as a “work in progress.” You can read our previous Reader reports about iEmulator on Intel Macs, or see a description of iEmulator and other products on our Windows on Intel Macs report page.
Thursby Software releases Beta of new high-security ADmitMac product. July 17, 2006 -- Today, Thursby Software has begun beta testing a new product, ADmitMac for CAC, software for Mac OS X that integrates Macs into Microsoft Active Directory environments. ADmitMac for CAC adds support for secure integration of U.S. Department of Defense Common Access Cards (CAC) and Macs.
ADmitMac for CAC provides single sign-on using a CAC card PIN number. It verifies the CAC and obtains Kerberos certificates, and makes these certificates available to “Kerberized” applications. When the CAC card is removed, ADmitMac for CAC locks the computer.
At login, the software challenges the CAC card to ensure that neither the card nor the privileges granted the user have been revoked.
PCmover migrates PC data to Boot Camp. July 17, 2006 LapLink Software’s PCmover (US $40 for download) is software for Windows that moves files, settings, programs, and other information from an older PC to a new one. It moves these items over a network, USB cable, or disk. A company spokesperson said that PCmover can also can move the data from a PC to Windows running in Boot Camp on an Intel Mac. The spokesperson said:
It has a new feature: if you need to move to a larger hard drive and can migrate security info, PCmover automatically transfers things like file ownership and access control. It also migrates in advance: PCmover can help you store a copy of your Windows files, settings and programs on a server, external hard drive or even CDs and DVDs and then migrate them to a PC [or Boot Camp] at a later date.
If you've used PCmover for moving data into Windows on Boot Camp
PDF2Office conversion utility native to Intel Macs. July 17, 2006 --Recosoft has released PDF2Office Professional 3.1 for Mac OS X (US $129, free upgrade for 3.0), software that converts PDF files to Word, PowerPoint, RTF, AppleWorks, and other file formats. The new version is a universal binary, running natively on Intel and PowerPC Macs.
Other improvements include:
PDF2Office attempts to recreate the layout of the PDF file in the new format, creating paragraphs, regrouping independent graphic elements, extracting images, creating tables, and processing headers/footers, endnotes/footnotes and columns/sections.
(For other file conversion programs for Mac and Windows, see our File Translation page.)
Limited workarounds for Entourage shared calendar problem. July 17, 2006 -- An anonymous reader sent us some partial workarounds fro the Entourage problem with shared calendars that we're previously reported:
I have seen this same problem when one of the shared users is running a PC. I have wasted much time on this issue...
In my experience I have had limited success by forcing the Entourage client to update itself. But this is very limited. Other workarounds was to send a meeting or event to the intended victim. Overall I've been very unhappy with this since the impression to other users is that it's my fault.
If you've seen this problem
Just recently we noticed that our Entourage users when sending attachments with "Pstr-" in the file name will get renamed at the other end as "#282". We have Entourage 11.2.5 and Exchange 2003.
I am looking into KB911829 as the possible cause and installing the V2.
We’ve previously reported on our Entourage Reports page that Micrsoft's KB911829 update to Exchange has caused some other problems with Entourage.
If you've seen this file renaming issue
Can’t save Excel on Win Server: readers says Virex isn't the problem. July 17, 2006 -- Brad Schwie notes that the fix we reported for the Mac OS X problem saving Excel files on Windows Server 2003 doesn’t work for him. Previous readers reported fixing the problem by turning off (or tweaking) Virex. Schwie reports:
I'm experiencing the issue and so are several other Mac users at my company. I completely ridded this machine of Virex a year ago. At the time, I was pretty sure I got everything single component of that app, as it manages to nest itself in a few places.
I've already seen the Microsoft Knowledge Base article as well. I don't have the hotfix described installed on our Windows server, but I also don't fit what's described in the article as I don't have Macintosh File Services enabled on the server.
If you can comment
TIP: Fix AppleMouse for Boot Camp. July 14, 2006 -- Several readers commented on Wednesday's report on the free applemou.exe utility for adding right-click functionality to Windows XP running in Boot Camp on Intel Macs.
Mike Ryder found a way to stop an annoying behavior with the utility:
To get rid of the window that pops up when the Applemou.exe runs do the following:
1. Take the applemou.exe utility out of the startup folder and put it in a permanent location (program files)
2. Open the startup folder by clicking on it from the All Programs list
3. Create a shortcut of the applemou.exe utility in the startup folder (Drag it while holding alt/option key)
4. Right-click (Ctrl-click) on the shortcut and choose properties
5. In the "Target" box add a space and then /s after the last quotation mark and click OK
It will run now and not show that "Apple Mouse Utility" window.
Michael Perbix prefers the Input Remapper solution that he reported to us last month:
Although this utility works, I had issues with it not always recognizing a right click, as well as just not being happy with it. It also does not solve the issue of laptop uses not having a DELETE key to login....key remapper that was mentioned earlier is a much more solid solution.
I have used applemou.exe since I first installed BootCamp. Other than the slight annoyance mentioned in the article (which I find to be no big deal), it works fine and ius certainly worth the price.
It works without fail so far, with the minor inconvenience of setting it up again each time I go into XP.
Reader verifies Parallels memory setting practice. July 14, 2006 -- James Whitney agrees with a reader report earlier this week that the best Parallels performance is achieved with a lower memory setting. The exact memory setting is not a fixed amount, but varies with the system. Whitney says:
I have a MacBook Pro with 1GB DDR2 SDRAM. Parallels tells me, using the method described in the article below, that the max I should use is 512 MB. I was using 764 and changed it to 512 with noticeable performance improvement both by Parallels and particularly in other OSX apps. I think this supports the conclusion below that the max memory is calculated by Parallels based on the system configuration.
This leaves open the question of whether adding more physical memory, having Parallels calculate a higher recommended memory max, and then using that higher max would result in better performance or not.
Another iEmulator 1.7.9 report for Intel Macs. July 14, 2006 -- A reader named John gave us a thumbs up opinion of running Windows in iEmulator on an Intel Mac:
I purchased iEmulator 1.7.9 last week and I've been quite impressed with it. Windows XP Professional installed on my Core Duo iMac without an issue and it runs at about the same speed as a decent Pentium 3 PC.
I ran into one problem when I was running Windows Update, but Richard at iEmulator quickly walked me through the process of updating Windows to Service Pack 2 which solved it.
On the whole, I'm happy with iEmulator. The two applications I need to use (Internet Explorer 6 and Quicken) work fine, and I can basically do everything I was using my old PC for.
See our Windows on Intel Macs page for previous reports on iEmulator on Intel Macs.
Apani updates Contivity VPN Client for Intel Macs. July 14, 2006 -- Apani Networks has released Contivity VPN Client 3.4 for Mac OS X, an update to its virtual private network client. The update adds support for Intel-powered Macs and fixes some minor bugs.
(Thanks to Mark Alexander for alerting us to this update.)
TIP: Fix for Boot Camp lack of right click. July 12, 2006 -- Aaron Rigby reports that a Windows utility called AppleMouse (or applemou.exe) by RH Designs adds right-click functionality to Windows XP running in Apple’s Boot Camp beta. The utility was written for using a Apple one-button mouse with Windows. Rigby reports:
I was reading Joshua Byers' review of Boot Camp Beta for Intel Macs and wanted to inform him of a tiny "fix-it" program that I found to solve the "Right Click" issue on the Intel MacBook Pro's when using Boot Camp to run XP.
The program is called applemou.exe and was made by RH Designs. The program makes the touch pad click button work the same as "CTRL-Click" in O SX for using "Right-Click" in windows. It is freeware and is clean. I simply put it in the Start Up folder and it will run every time.
Unfortunately I haven't figure out a way for the software to run every boot without the "Apple Mouse Utility" window opening (you can close this window and it will run silently still), but I can put up with that minor annoyance to get my right click back. Its copyright is in 2002, and it comes as a ZIP file with a READ ME.txt with the EULA. It works fine in all apps that I've tried, including games, and web browsing.
If you've tried applemou.exe with Boot Camp
More reports of iEmulator 1.7.9 on Intel Macs. July 12, 2006 -- Several more readers reported on using the most recent version of iEmulator to run Windows on Intel Macs. Although it is slower than Parallels Desktop, Simon Visinoni thinks iEmulator's tech support is better:
I've been having an exchange of emails with iEmulator’s support about my complains on performance on an Intel Mac compared to Parallels. I may underline that iEmulator’s support is far better than Parallels' and I've been told that full virtualization will be added in a very near future.
Mike Horwitz compared the performance of iEmulator on Intel and PowerPC Macs (it runs on both). He also reported problems with accessing the web from Windows:
On my 2 GHz MacBook with 1GB of memory and Windows 2000 Pro, iEmulator 1.7.9 was much faster than using it on my G4 AGP (upgraded from 400 MHz to 1 GHz ). It was able to wireless to the web and ran at a low but usable speed if on needed to use Windows, but it was too slow to consider it anywhere near equivalent to native. iEmulator on an Intel Mac was unable to fully function on the web site I use for work (pages loaded with page errors or didn't load at all in both Explorer or FireFox).
See our Windows on Intel Macs page for previous reports on iEmulator on Intel Macs.
Another reader sees Entourage/Exchange shared-calendars problem. July 12, 2006 -- Tom Francais reports having the same problem with Entourage calendar syncing that we reported on Monday.
In reference to Paul Ukena's problem posted July 10, 2006: I have the same problem. Entourage users can't make changes to a shared user calendar. No errors appear; the changes just never sync to Exchange. Changes made to the to server by some other method will sync to Entourage. The Entourage user has Owner permission to the shared user calendar. I do not see this problem with Public Folder calendars.
Entourage users are a small, but growing, group here so I don't how long this problem has existed. I first heard of it about a week after we applied the latest patch to Exchange.
The previous report noted that the most recent Exchange patch didn't fix the problem. If you're seeing this problem
BetterZip 1.2 adds compression formats. July 12, 2006 -- MacItBetter has released BetterZip 1.2 (US $20), an update to the cross-platform compression too for Mac OS X 10.4 and later. The new version adds support for CPIO, RAR, and 7-Zip archives. The last two allow the splitting of archives into multiple volumes with password encryption. Version 1.2 also adds password encryptions to zip files. BetterZip 1.2 is also faster than previous versions, according to the company.
For a list of cross-platform software for Mac OS X and Windows, see our Compression Solutions page.
Tests show that less is more with Parallels. July 10, 2007 -- Sylvain Jette sent us test results that indicate better Parallels Desktop performance with less RAM assigned to Windows. Jette also found that this is not the case with iEmulator running on an Intel Mac.
This Parallels behavior is not what users have come to expect with running Windows on Macs. Ever since the first emulators began appearing for Macs, assigning more memory to Windows has been a method of increasing performance.
A reader last week said that for Jette’s first batch of test results, the memory setting was too high. Jette’s responed by sending us this report:
After reading Tony Martin's tip on running Parallels with 512 MB assigned RAM, I can now say that Parallels is in fact faster booting and launching apps with 512 MB than 764 MB rams. There were almost no changes for iEmulator.
764 MB of RAM
Windows XP boot time = 1 minute 15 seconds
Windows XP shutdown = 15 seconds
Lauching IE to MSN.com = 15 seconds
521 MB of RAM
Windows XP boot time = 1 minute 15 seconds
Windows XP shutdown = 9 second
Lauching IE to MSN.com = 15 seconds
764 MB of RAM
Windows XP boot time = 36seconds
Windows XP shutdown = 20seconds
Launching IE to MSN.com = 7seconds
512 MB of RAM
Windows XP boot time = 23 seconds
Windows XP shutdown = 20 seconds
Launching IE to MSN.com = 5 seconds
Jim Pepe, however, thinks the situation is more complicated:
I just wanted to point out this may not be accurate: "Parallels recommends no more than 512 MB, and in most cases 340 MB should be the ideal amount of RAM to give the virtual machine."
I have been using Parallels since the first Beta, I don't see where Parallels recommends no more than 512 MB; I believe it's system dependent. This is from the Parallels help file:
"The Memory Size parameter describes the size of virtual memory (RAM) to be allocated for the virtual machine. You can choose any value from 4 to 1500 MB. We advise you not to exceed the recommended maximum because this is the limit of the physical RAM that your system should reserve for virtual machines. If this amount is not enough the redundant memory is swapped to disk, thus slowing down both guest OS and primary OS performance."
I believe each size is based on how much RAM the user actually has installed. On my machine, Parallels is saying 924 MB is the maximum I should use.
The latest patch to Exchange failed to fix a problem for us. We have secretaries sharing their bosses' calendars, with owner permissions, and they can't add or delete anything to the calendars (they can add stuff, it just doesn't synchronize with the server).
If you're seeing this problem
User finds that OS X 10.4.6 UAM doesn't help . July 10, 2006 -- Wolfgang Schulz-Heidorf in Berlin, Germany reports that the latest UAM included with Mac OS X 10.4.6 did not fix a problem connecting to Windows Services for Macintosh, as it did for other users. He reports:
We have tried to connect an Intel-Mac as well as the G5-iMac (both with 10.4.6) without the origin MS-UAM to the W2K-Domain-Server. We have not been that lucky! The G5 Mac will connect only if MS-UAM is installed, the Intel Mac shows the AppleShare authentication dialog even if the MS-UAM is installed. In any case the connection between the Intel Mac and the Windows 2000 Server doesn't work.
Missing Sync will support Win Mobile 5 syncing. July 10, 2006 -- Mark/Space has released a beta (prerelease) of The Missing Sync for Windows Mobile 2.5, software to sync Windows Mobile handheld devices with Intel and PowerPC Macs. The new version will add support for devices running the Windows Mobile 5 operating system.
TIP: Optimizing Parallels Desktop performance. July 7, 2006 -- Tony Martin commented on some performance tests we posted earlier this week for the Parallels Desktop and iEmulator virtual machine products for Intel-Macs. For Parallels, Martin advocates lower memory settings for running Windows XP:
One of your readers reported “For the following tests with Windows XP I am using 764 MB of RAM on the virtual machines..."
Parallels recommends no more than 512, and in most cases 340mb should be the ideal amount of RAM to give the virtual machine.
When I had Parallels at 800MB, it performed very poorly until I lowered the memory.
iEmulator 1.7.9 on PPC not as effective as on Intel. July 7, 2006 -- Dick Sampson tried iEmulator 1.7.9 with Windows XP on his PowerPC Mac. His experience was not as good as that of a previous reader with an Intel Mac:
I have a G5, 1.8 GHz with 1.5 GB of RAM. I have created a 4 GB compressed HD and installed Windows XP Home Edition. I have allotted 764 MB of memory to the virtual machine.
I am not impressed at all. Windows XP is almost unusable on my G5. So slow that the start menu redraws when clicked on. Boot time is around 7 to 8 minutes. Shut down without saving the PC state is almost instantaneous.
You can read reports for previous versions of iEmulator (on PowerPC) here. For reports of the Intel version, check here.
If you’ve tried iEmulator 1.7.9 on an Intel Mac We'd especially like to hear from people who have tried running Windows Vista on it.
Site claims that Microsoft demo'd Vista on a MacBook Pro. July 7, 2006 --A web site called Uneasysilence.com claims that Microsoft recently demonstrated Windows Vista Beta 2 on a MacBook Pro.
If this is true, Microsoft would have had to tweak Boot Camp or Windows Vista, or add some software of its own. That's because the Intel Macs use Intel's Extensible Firmware Interface (EFI) as the boot firmware. Windows Vista Beta 2 does not support EFI.
TIP: MS recommends group policy settings for Mac clients. July 7, 2006 -- A Microsoft article called Digital signing settings which assist with the addition of Apple Mac Clients to your Network provides Group Policy security settings that Microsoft recommends for Mac clients on a Windows Server 2003 Small Business Network.
Another report of AD "Allow administration by" groups problem. July 7, 2006 -- Tyler DeHaan is having the previously reported problem with Mac client/Active Directory and groups called "Allow administration by." The original report was with Mac OS X 10.4.4, but DeHaan is seeing the problem with 10.4.6:
Our company is currently experiencing this issue. I'm submitting this in the hopes someone posts a resolution. We are currently experiencing this problem on 10.4.6. Needless to say, the inability to manage our systems with proper administrative credentials is a huge problem.
If you're seeing this problem
We have a Windows 2003 SBS server and an Xserve running Mac OS X 10.3.9, and are having problems using the SBS Active Directory to provide authentication to the Xserve. We have had this setup and working but after 15minutes the Windows clients were failing to connect properly.
It does, however, working fine by unbinding from the domain and using local groups with the same username and password.
If you've seen this problem
Microsoft posts info on using Centrify in AD environments. July 7, 2006 -- Microsoft has published a white paper on using Centrify DirectControl for Unix, Linux, and Mac OS X clients in Active Directory environments.
Readers react to iEmulator; runs Win Vista on Macs. July 5, 2006 -- Several readers sent in reports about the new iEmulator version 1.7.9, which shipped last week, the first version to run on Intel Macs. This version can run Microsoft Windows Vista on a Mac, according to the company. Vista, now in the beta 2 stage, does not run natively on Intel Macs, nor does it work in Boot Camp, Parallels Desktop, or on Virtual PC on PowerPC Macs. (iEmulator will run on both Intel and PowerPC Macs.)
Sylvain Jette compared the iEmulator to Parallels:
Overall here are some of the differences between IEmulator and Parallels so far. Pease note that I've only used it for a short time, I will give more details as I continue comparing. Parallels is faster and more solid, however, iEmulator simulates ACPI and you can actually install Vista Beta 2 on it unlike Parallels (so far). I was also able to install Xandros 4.0 [Linux] without any special intervention (troubleshooting). My next quest will be the new Novell Desktop preview.
For the following tests with Windows XP I am using 764 MB of RAM on the virtual machines:
Windows XP boot time = 1 minute 15 seconds
Windows XP shutdown = 15 second
Lauching IE to MSN.com = 15 seconds
Windows XP boot time = 36 seconds
Windows XP shutdown = 20 seconds
Launching IE to MSN.com = 7 seconds
MacWindows readers were generally not impressed with previous PowerPC versions, but Bill Cline is satisfied with this version:
iEmulator 1.7.9 works on Mac PowerBook G4 with a PowerPC processor. I was in the graphics industry for years until it really went bust a few years back, had my Mac for the graphic business and was about to sale it on e-bay and buy a PC, I'm in the mortgage industry now and ALL the software is Windows base this new software is great I can now run the software on my Mac. The best of both worlds.
Michael Bar-Sinai saw was not happy with the performance of the Intel version:
iEmulator does not feel snappy enough. I even encountered some redraw lags,where you can see Windows redrawing a window, instead of the window just appearing there. I might do better with more memory though. (1 gb ram, 512 allocated for the virtual machine, MacBook Pro 2.0 GHz)
If you’ve tried iEmulator 1.7.9 on an Intel Mac
For a look at iEmulator and other options see our Running Windows on Intel Macs special report page.
DivX package comes to Mac. July 5, 2006 -- DivX, Inc. has released DivX for Mac ($20), a software suite for using the DivX video format. This first Mac release (called version 6.5) includes a DivX player, a DivX converter, and a QuickTime plugin.
While there are other media players that work with DivX (MPlayer and VLC), this “official” version from DivX, Inc. has a number of unique features, such as the ability to play a movie on the Desktop and to have a movie start where you last stopped it. The DivX Player is also available by itself as a free download.
DivX Converter can encode DivX format video from other movie formats. Users can drag and drop nearly any digital video files to DivX Converter. The resulting DivX movie file can be played on standalone DivX media players and DivX DVD players. DivX Converter also outputs video files and the necessary html code to embed those movies into websites for use with the DivX Web Player. (The Converter does not convert DivX to other video formats.)
DivX for Mac includes the DivX 6 codec for Mac as a QuickTime 7 plug-in that enables Mac OS X to play DivX movies in QuickTime player or other QuickTime-enabled apps.
Reader says 10.4.7 doesn't solve some SMB problems. July 5, 2006 -- Frederick Avolio says that despite the long list of cross-platform networking fixes in last week's Mac OS X 10.4.7 update, he is still seeing SMB problems:
The problems in your Tiger 10.4.5 problems accessing SMB servers article are still a problem in 10.4.7.
how the 10.4.7 update affected your previous problems.
Cross-platform drive solutions page updated. July 5, 2006 -- We've updated our Cross-platform Drive Solutions page, which lists third-party software that enables Windows to use Mac-formatted drives and optical media.
2006: | January-June |
2005: | January-June | July-December |
2004: | January-March | April-June | July-December |
2003: | January-March | April-June | July-September | October-December |
2002: | January-March | April-June | July-September | October-December |
2001: | January-March | April-June | July-September | October-December |
2000: | January/February | March/April | May/June | July/August | September/October | November/December |
1999: | January/February | March/April | May/June | July/August | September/October | November/December |
1998: | December | November | October | September | August | July | June | May | April | March | February | January |
1997: | December | November | October |
To search MacWindows, see the MacWindows home page.