Common Computer Problems And Possible Fixes
Note: The following information is a combination of material
gathered from the newsgroups
written by both myself and many other talented newsgroup contributors who offer
their help to others.
Problem: When I use Windows Explorer it hangs when trying to delete or right a file or folder.
Possible Solution: If you have installed the Vividence player (MS site has a popup that asks if you want to take part in a usability survey, if you say yes, you will have had to install this ‘plug-in.’ – Uninstall the Vividence player.
Problem: I've been using AdAware
to clean out any “spyware” on my system,
however, I keep getting a cookie called "doubleclick".
Does anybody know what it is and how to permanently remove it?
Possible Solution: Internet Explorer: Tools > Internet Options... > Privacy > Web Sites "To override cookie handling for individual Web sites, click the Edit button." Enter "doubleclick.net" in the edit box, and click "Block.”
Problem: I have an Emachine and I recently installed a CD-RW drive, but it does not show up in Windows. Why?
Possible Solution: You will need to download the VIA “IDE Miniport Driver”
(http://www.viaarena.com). This is not part of Via 4 in 1 service pack
which you should also have installed.
The Miniport Driver will install a “Bus Master PCI Utility”, which you
will see in your system tray after installation. Double-click on it and you
should see your CD-RW drive in the list. Click once on the CD-RW drive and
change it’s current mode to PIO MODE 4, then click
File and click Save, click File and Click Commit Change. After re-boot the
CD-RW should work as expected.
Problem: When trying to download critical updates from Microsoft for Win ME, I get an error message that reads: WScript Error-Windows Scripting Host (on the top of the window) then in the window it says: Loading script "C:\Nologo" Failed.
Possible Solution: Download & install the Microsoft scripting engine(s) to see if that corrects the problem. You can get it here:
http://download.microsoft.com/download/winscript56/Install/5.6/W9XNT4Me/EN-US/scr56en.exe
Problem: How can I turn off that annoying error reporting with Internet Explorer 6 in WinME?
Possible Solution: In Registry Editor (Regedit.exe), create a DWORD
value called IEWatsonEnabled and set it to 0 in the
following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet
Explorer\Main
For more info, see this MSKB article: http://support.microsoft.com/default.aspx?scid=kb;EN-US;q276550
Problem: When I attempt to install Easy CD
Creator, the windows installer fails for me in both WinME
and Win 2k pro. I don't even get files
copied to the HD before it aborts.
Possible Solution:
If you receive an error or the installer just quits when trying to install Roxio Easy CD Creator 5, then co to the folder:
"C:\Program Files\Common Files" and rename the folder: "InstallShield" to "xInstallShieldx".
Then install Roxio Easy CD Creator
5. If in the future when trying to uninstall a program you receive an error,
you can rename "InstallShield" to something
else and rename "xInstallShieldx" back to
"InstallShield". Although,
this may never be necessary.
Problem:
How can I share my Epson printer with other PC’s on my network?
Possible Solution: http://support.epson.com/webadvice/wa0178.html
Problem: Why doesn’t Family Logon work?
Possible Solution: Try this http://support.microsoft.com/support/kb/articles/Q176/0/59.ASP
If that doesn’t work, try this:
regedit
HKEY_LOCAL_MACHINE
NETWORK
LOGON
Set key 'Primary Provider' = Microsoft Family Logon
Problem:
I am having a small problem opening "windows setup"
(control panel>add/remove programs>windows setup) When the window opens I
get an error message saying, Rundll32 - An error has occurred in your program,
to keep working anyway, click Ignore and save work in a new file. To quit this
program click Close. You will lose information you
entered since last save. The "Ignore" button does not work, when
clicking "Close" I get another error message saying
:
Rundll32 has caused an error in Setup
Rundll32 will now close.
Rebooting doses not work.
Any ideas on how to fix this?
Possible Solution: Run this
attachment! A registry cleaner is the cause of this.(VarLDID.reg)
Problem: I upgraded to Windows ME about a year ago. Now whenever I open My Network Places, it a) Opens up, but it freezes and Explorer crashes and b) after Explorer crashes, I can open up My Network Places again and nothing will happen. This only happens the first time I open My Network Places with each logon. Occasionally it will happen the second and third times with each logon, but that's not often. Before I upgraded to Windows ME, this never happened.
Possible Solution: Try un-installing
Client for Microsoft Networks, rebooting, and re-installing it.
Problem:
Does anyone know if Windows ME has the little utility program called
"Backup"
that is located in the system tools of Windows 95 and 98?
Possible Solution: The MS Backup
program is in the add-ons\msbackup folder on Microsoft Me CDs
but unfortunately it appears that not all OEMs have included this folder on
the CDs they provide with new PCs. Similarly many of those OEMs who
simply provide restore CDs appear also to have omitted this program.
See also MS KB Q264541 - "Microsoft Backup Tool Is Not Installed by
Windows
Millennium Edition"
(http://support.microsoft.com/support/kb/articles/Q264/5/41.ASP)
Problem:
I get an error message when I load Outlook Express (IE5.5
Possible Solution: It's a bug in the PGP plugin for Outlook Express. In versions after 6.5.8 (e.g. 7.0), it *might* be fixed. Since I really don't rely on the plugin, I merely installed PGP without it and it works fine. If I need to unscramble a news item, I just decrypt the current window from PGPTray.
Problem: Content Advisor was enabled. I would like to disable it. I cannot just click the DISABLE button...need to go into settings. Each time I go into Tools | Internet Options | Content | Settings and deselect the second check mark about users not having to type a password....then APPLY...I can then DISABLE (after typing my password). However, when I exit IE and then reopen, content advisor is again enabled. How can I completely disable the content advisor so I don't keep getting the pop-up menu about "check settings for content advisor" each time I access the Internet?
Possible Solution: The password is held
in the HKEY LOCAL MACHINE\SOFTWARE\MICROSOFT\Windows\Current
Version\Policies\Ratings in a key
labeled "key" delete this key and it will set the password to blank.
Next, find and delete the file Ratings.pol. You've
just deleted your original Content Advisor password. Restart the computer and
run Internet Explorer again. Choose View,
Internet Options, click on the Content tab, and click on Disable. When asked
for a password, don't enter anything, just click on OK. This will disable
Content Advisor, since there's no longer a password. You can enable it again if
you want as soon as you think up a more memorable password.
Problem: Can anyone tell me how to add or remove entries that are listed when right clicking the start button? Is it a registry hack?
Possible Solution: Yes it is a registry
hack.
Go to HKEY_CLASSES_ROOT\Directory\Shell
Everything in here is what is listed when your right click
on the
Start button.
To remove an entry just deletes the Key.
To add an entry, do this. (As and example I will add a Notepad option)
1) Right click on the "shell" Key and select New->Key.
2) Name the new Key "Notepad."
3) In the default string enter "Notepad" in the data field. (This is
the name that will appear when you right click on the Start button.)
4) Right click on the "Notepad" key you just created and select
New->Key and name the new key "command"
5) For the default string type in "c:\windows\notepad.exe" in the
data field. (Enter whatever command you want to run when you click on the item,
after right clicking on the Start button.)
This is just and example of using the Notepad command, but you could really do
it for any application on the windows system.
Problem:
In the My Computer window, I click on Map Network Drive, select the
next available Drive letter, and select the path that is \\HOME\C, I can either check, or leave the
Reconnect at logon box and it doesn't make a difference. I don't get any
error message. But I also don't see the mapped drive.
I can access the ME C drive from the 98 machine through Network Neighborhood,
but why can't I see it as a Network Drive?
Possible Solution: Is Tweak UI installed? If so, run it and go to the My Computer tab. Make sure that your chosen drive letter is enabled.
Problem:
Using either the AT&T dialer, a connectiod with the AT&T
number or a connectoid to the local free service (ALL which worked previously) the
modem dials, logs on and then seems to stop any sending/receiving of
data. It's as if the computer doesn't know he's connected to the
internet. When I try to browse any web pages (IE) I get 'Page cannot be
displayed'
Trying to send/receive email (Outlook Express) gets 'Server not found'. Pinging
web name addresses and IP addresses gets 'unknown host'
Possible Solution: The "Unknown
host" message from "ping" indicates that DNS name resolution is
failing. Since it's happening with two different I
enter:
ping 216.32.74.51
ping www.yahoo.com
If the first one succeeds and the second one fails,
there's a good TCP/IP connection but no name resolution. In that case,
try this fix:
Go to Control Panel | Internet Options | Connections. If there's a LAN
Settings button, click it, then clear all of the boxes on that screen.
If that doesn't help, try this:
1. Un-install Dial-Up Networking. Don't reboot.
2. Delete registry key HLM\System\CurrentControlSet\
3. Re-install Dial-Up Networking.
4. Reboot.
Problem: My firewall (zone alarm) and it telling
me that explorer.exe is trying to connect to 239.255.255.250 port 1900. Anybody
know anything about this?
Possible Solution:
Take a look at this MSKB article, it may help.
Q262458 - Description of Universal Plug and Play Features in
Windows Me
http://support.microsoft.com/support/kb/articles/Q262/4/58.asp
Q276507 - How to Enable the Universal Plug and Play Feature
in Windows Millennium Edition
http://support.microsoft.com/support/kb/articles/Q276/5/07.asp
Problem: My internet explorer will not find any web pages. I can successfully ping from DOS, but in Windows, I cannot visit any web sites or check e-mail.
Possible Solution: Here are two likely
fixes:
1. Go to Control Panel | Internet Options | Connections | LAN Settings
and clear all of the boxes.
2. Re-create the Winsock2 registry entries:
a. Un-install ICS (if installed).
b. Un-install Dial-Up Networking. Don't reboot.
c. Delete registry key HLM\System\CurrentControlSet\
d. Re-install Dial-Up Networking. Reboot.
e. Re-install ICS (if desired).
Problem: When I attempt to manage my virtual memory settings, it shows a negative number as the maximum allowable size. Why?
Possible Solution: http://support.microsoft.com/support/kb/articles/Q272/6/20.ASP
Problem:
Help! I deleted SULFNBK.EXE because of the email hoax suggesting it
(http://www.symantec.com/avcenter/venc/data/sulfnbk.exe.warning.html)
how do I restore this file?
Possible Solution: Click Start, click
Run, type MSCONFIG (hit enter), click the button labeled "Extract
File." For the name of the file you want to restore, type SULFNBK.EXE.
Restore from your Windows Millennium CD (if your CD is your D: drive, type:
D:\WIN9X). Save File In: C:\WINDOWS\COMMAND
Problem:
On boot up, after it displays "verifying DMI pool data...",
the next message I see is "Cannot set the code page(s) in
Display.sys". WinME continues to load without any problems. I play games
ok and everything looks fine. I'm just a bit concerned on this message.
Possible Solution: Click Start, click Run, type MSCONFIG (hit enter), click the button
labeled “Extract File…” For the name of the file you want to restore, type
EGA.CPI. Restore from your Windows Millennium CD (if your CD is your D: drive,
type: D:\WIN9X). Save File In: C:\WINDOWS\COMMAND. (Found that in msconfig
(international) pointing to display data file
c:\windows\command file EGA.CPI).
Problem: Windows Family Logon missing in Windows ME?
Possible Solution: The file you will need to extract is NETFAM.INF: Click Start, click Run, type MSCONFIG (hit enter), click the button labeled "Extract File." For the name of the file you want to restore, type NETFAM.INF. Restore from your Windows Millennium CD (if your CD is your D: drive, type: D:\WIN9X). Save File In: C:\WINDOWS\INF. Then back in your network properties, click Add, click Client, click Add, and Microsoft Family Logon should appear.
Problem: When I open msinfo32 Device Manager it tries to connect to the internet. It is sucatreg.exe (Windows catalogue registration) knocking on the door out. What is it trying to do and how do I stop it doing it?
Possible Solution: Most likely you have an "unsigned" driver that sucatreg.exe is trying to update a driver for or you may have a damaged catalog. In Control Panel, double-click Internet Options, click on the TAB labeled Advanced, scroll down the list to the heading of Security, and Uncheck the option “Check for publisher’s certificate revocation.”, Then click OK. That should fix it.
Problem: Before I had to reformat my hard drive and reinstall Windows ME last week, I was able to view ALL files/folders, not just the .cda files, on an audio CD using Windows Explorer. I was also able to open the .wav files using Windows Sound Recorder.
Possible Solution: You must replace the CDFS.VXD virtual device driver that is part of WinMe with one that displays the contents of the CD as wav rather than cda files. See http://www.sonicspot.com/alternatecdfsvxd/alternatecdfsvxd.html where you will find full details. Unfortunately the link on that page to cdfs.zip containing the required vxd is broken but others are easily found on the net using your favorite search engine or try here: http://cooler.irk.ru/BIN/
Problem: How can I turn off my numlock when Windows ME boots?
Possible Solution: Copy and paste the
following 2 lines into a Notepad file. Save the file as Numlock.vbs. Then
create a shortcut to it in the Start Menu, Programs, Startup folder
set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.SendKeys "{NUMLOCK}"
Problem: Several apps have been known to leave a "folder" in My Computer after uninstalling. How can I remove these empty folders?
Possible Solution: It is a NameSpace
item. Go to REGEDIT.EXE and the CLSID of the icon will be under the key: For
folder in "My Computer"
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\mycomputer\NameSpace\
For folder on "Desktop"
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\explorer\Desktop\NameSpace
It is a good idea to export the \NameSpace\ key to a temp.reg file first to be
safe before deleting the key under NameSpace.
Problem: Even if I close all open Explorer windows before I restart, several reopen after the restart.
Possible Solution: This is a bug with
ie6 beta. To fix it, open regedit, delete the key
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Restart
Commands
Problem:
Outlook 2000 and Windows 98se – Some of my
messages have started coming in with no subject line and the message body is
empty.
Possible Solution: Have you installed Internet Explorer 6 beta. If yes: There is a reported fix to the problems with the beta version of Internet Explorer 6 in respect of not receiving header and body information in some mail messages. This fix is by John S. Vasco Jr.
"The fix is unsupported and care must be taken in regard with the possible consequences in its use not only with IE6 but any other program that this file may be used by."Close all Programs then from Start > Run type sfc (System File Checker) > Extract a file called mlang.dll from your installation disk or from your Windows cab files (located Windows Update Setup Files). There is no need to uninstall IE6 for this to work After extraction Reboot your machine.For a brief overview of SFC check out this knowledgebase article:http://support.microsoft.com/support/kb/articles/Q185/8/36.ASPPlease Note a few people in this newsgroup have reported having problems with this fix, as it says earlier the fix is unsupported and it cannot take into account the mix of software on people's machines, I reckon though the fix has cured the problem without side effects more regularly then not..
Problem: I keep getting a buffer error while recording CD. I have an HP Recorder and I'm running Windows ME. Is there any setting that can help???
Possible Solution: Download and install Cacheman from www.outertech.com it has an optimized cache setting for CD burning.
Problem: When I right click with the mouse, the system requests a disk be inserted into drive A (a floppy disk drive).
Possible Solution:
Do you have StuffIt installed? If so then the fix is here:
http://www.aladdinsys.com/support/techsupport/win/dswin/dswin3.html
Problem: For about a week every time I do a right mouse click on any file or folder, it always goes to my floppy drive first (with an annoying noise as the drive is empty) before it opens. Anybody have a solution for that?
Possible Solution:
Take
a look at this MSKB article, it may help.
Q216752 - Floppy Disk Drive Is Active When Opening or Saving Files:
http://support.microsoft.com/support/kb/articles/q216/7/52.asp
In addition: When the last action in Explorer was A:\, Windows remembers this
action.
Insert a floppy and access A:\, then access C:\, and close Explorer and reboot.
Open
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\RunMRU
Look for an entry that references A:\
Other places to look:
C:\Windows\Recent (hidden folder)
C:\Windows\Pif (hidden folder)
C:\WINDOWS\Application Data\Microsoft\Office\Recent
FLOPPY DRIVE RANDOMLY GRINDS
Open the registry editor and do a find on: A:\
However before deleting the entry, export the key so you can restore the
registry should problems occur. Most likely a reference will be in an MRU
key. Be sure to use F3 to continue the search as there could be multiple
entries. PC Mag article on other causes: Floppy Disk Drive Demons
http://www.zdnet.com/pcmag/pctech/content/solutions/uu1617a.htm
Problem: I am having problems with outlook, windows media player and real player. Each program will tell me that it has caused and error in winmm.dll and if it is continuing then try restarting.
Possible Solution:
Do a search for winmm.dll. The date should be
START button/Run/msconfig/Extract
C:\Windows\System\winmm.dll
Problem: I ran Boot Log Analyzer and found that "Enumerating Tape Detection (Tape controller\Tape Dectection\0000)" is taking 227 seconds. Does anyone know how I can disable this detection? I do not have a tape system.
Possible Solution:
Tape detection is probably a result of having installed MSBackup. When
you installed MSBackup it installs three virtual device drivers one or more of which
is causing you your start-up problems. I would suggest removing or renaming the
following files to stop tape detection at startup.
drvwq117.vxd
drvwppqt.vxd
drvwcdb.vxd
You might also want to remove/rename:
pnpwfdc.inf
pnpwide.inf
pnpwtape.inf
pnpwppt.inf
Boot Log Analyzer should tell you which of the above vxds is causing you your problems;
I seem to recall that the usual culprit is drvwq117.vxd.
Problem: Do those programs that claim to cool your PC actually work?
Possible Solution: If your system is using ACPI (right-click My Computer, select Properties, then the Device Manager tab, check the "System Devices" branch) then you don't need it at all. Windows Me implements the same "HLT" command that CPUIdle, Rain, Waterfall, et.al. do, so adding the software will do nothing for cooling your CPU.
Problem: How can I determine what is running at startup?
Possible Solution:
To produce a list of items running from
Startup:
Start - Run (type) "msinfo32" (no quotes)
Click on +Software Environment (left pane)
Click on Startup Programs (left pane)
Click Edit (up top) select: Select All (highlights items in right pane)
Click Edit (again) select Copy
You can either Paste to Notepad and Save as a text file, (Startup.txt) or Paste
directly into your next message
Problem: When I clicked restore to check my checkpoints, the
calendar is showing
Possible Solution: You appear to have been using a registry cleaner that is not
compatible with WinMe and removed some vital entries from the registry.
See MS KB Q275646 - "System Restore Shows Date of
Uninstaller 6.01 which is supposed to be ME compatible.
Problem: When I go online using the MSN Internet Access Icon, I
get the message that "Another program
is dialing the requested number".
Possible Solution: MSN and IE are both using it. Right-click on the IE icon, go to
Properties, then Connection and check "Dial whenever a network connection
is not present"
Problem: How can I add PWS to windows ME?
Possible Solution:
From
(How To Install PWS
in Windows Me: http://members.home.net/winhelp98/pws.htm)
Q266456 - Personal Web
Server Is Not Included with Windows Millennium Edition
http://support.microsoft.com/support/kb/articles/Q266/4/56.asp
Use the patch from this Microsoft Knowledgebase Article first:
Error Message: An Unknown Error Occurred While Making MTS Specific Changes to
the System Registry
http://support.microsoft.com/support/kb/articles/Q246/0/81.ASP
Install PWS IN custom MODE and ONLY install Transaction Server, SETUP will
prompt you, that other components are needed. Get it down to basically just
Transaction Server, core components and MDAC. Reboot and then run Setup again
via Add/Remove and install the other components. (Personal Web Server,
etc..)
If you already have PWS
installed, try removing everything via Add/Remove but Transaction Server then
reboot. Run Setup again to add the rest.
=====================
To Download\Install FrontPage Express: (includes PWS)
http://corporate.windowsupdate.microsoft.com/en/default.asp
Click Search, then on next page click Software Updates, then on next page
(type) "FrontPage Express" (FrontPage must be one word) and select
"Windows 98 (IE5, 5.1, SP1) and also select "Other downloads"
and click Next. FrontPage Express is the only download listed.
====================
FrontPage Express 2.0 (2.0.1.2131)
Manufacturer: Microsoft
Component Type: Other Downloads
Platform: Windows 95 (Internet Explorer 5, 5.01 SP1)
Language: English
Date Posted: Thursday, February 17, 2000
Size: 1.2 MB Installation package: fpesetup.exe
File Listing of Personal Web Server 4.0 for Windows 95 :
http://support.microsoft.com/support/kb/articles/Q167/2/53.asp
Q217763 - File Access Vulnerability in Personal Web Server:
http://support.microsoft.com/support/kb/articles/Q217/7/63.ASP
Problem: I store my graphic files in the default
folder "My Pictures". When I click a graphic at a web page, the
"Save to" option is always "Desktop" [active desktop is
enabled]. I browse to "My Pictures" and save there. Next time I need
to save a graphic I have to go this process again. How do I choose a default
other than "Desktop" for graphics?
Possible Solution:
Be sure to backup the registry before attempting this -- Change it in both
places:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell
Folders
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
Problem: Sometimes menus don't expand when pointed at with the mouse pointer (for example: settings > control panel...) and the only cure for this is to restart my computer.
Possible Solution:
devldr16.exe c:\windows\system\devldr16.exe All Users
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Uncheck via Msconfig | Startup \ Restart = NO!
Follow the instructions below then restart.
Disable "Creative SB16 Emulation" in Device Manager. If you have no
interest in dos sound/games etc, then rename devldr16.exe to devldr16.bak and
reboot. Use the "Cleanup" button in Msconfig to remove entry. You can
disable SB16 emulation from your System Properties.
1. Click Start, point to Settings, and click Control Panel.
2. Double click the System icon, and then click the Device Manager tab.
3. Click the plus sign (+) next to Creative Miscellaneous Devices,
unless the device category is already expanded with a minus sign (-).
4. Click Creative SB Live! SB16 Emulation to highlight it, then click Properties.
5. Put a check-mark in box that says Disable This Device In This Hardware
Profile.
6. Click OK, OK again, and then Close. Note that this will disable your sound
device in MS-DOS mode.
Be wary of this, in system properties there are many entries for a properly
installed SoundBlaster, the only one you should disable is the SB16 emulation,
disabling the multimedia entry that is paired with it
will cause you to lose the joystick.
Problem: After reinstalling ME yesterday on a
clean hard drive, System Restore no
longer works. I either get a blank window or more usually the following:
An error has occurred in the script on this page
Line: 14
Char: 9
Error: Object doesn't support this property or method
Code: 0
URL: res://rstrui.exe/start.htm
Do you want to continue running script on this page?
Possible Solution: It's most likely
due to your computer not making a restore point on its initial load of windows.
What you need to do is make this first restore point, and it should work fine.
Just run it with the switch, from a command prompt as follows:
C:\WINDOWS\SYSTEM\Restore\rstrui.exe /makefirstrestorepoint
Then restart and it should work
Problem: Every time the computer is turned on, the Scandisk program runs. Not only does it run, but it runs in "Thorough" mode, looking at every sector on the hard drive.
Possible Solution: http://support.microsoft.com/support/kb/articles/Q273/0/17.ASP
Problem: Since
switching to WinME from Win98, the button images will become corrupt.
They still work, but the images look like "static". This will
always happen to the Minimize, Restore, and Close buttons on all windows, and
will usually happen to checkboxes and other standard window elements.
Possible Solution: These are all generated from the common system
font MARLETT.TTF. This is what happens if it gets corrupted. This font is a protected
file: to restore a good copy from the CD, first use a run of msconfig.exe and
its 'Extract File' button to put a copy into C:\windows, then boot to the
startup floppy and do the following commands:
ATTRIB -H C:\WINDOWS\FONTS\MARLETT.TTF
COPY C:\WINDOWS\MARLETT.TTF C:\WINDOWS\FONTS\
ATTRIB +H C:\WINDOWS\FONTS\MARLETT.TTF
Problem: Every folder has the + to its left, whether there is a sub-folder or not. If there is not a sub-folder clicking on the + sign next to it does nothing.
Possible Solution: Your problem exists because you are running the BETA of Internet Explorer 6. That's one of the little bugs in it. Check out the IE6 beta newsgroups at msnews.microsoft.com.
Problem: How
can I make the text under the icons on my desktop transparent?
Possible Solution: Use this software: http://www.pobox.com/~jayguerette/transparent
Problem: I have installed Internet Explorer Version 6
and I really hate the floating toolbar
that seems to come and go, how can I get rid of it?
Possible Solution: In Control Panel, double-click on Internet Options, click the Advanced Tab, scroll down the list to the Multimedia heading and uncheck the box that says “Enable Image Toolbar”
Problem: Is
there any way to change the save location for Notepad. It
currently saves to My
Documents.
Possible Solution:
Just adjust the Start In property in the shortcut within the Menu Tree.
Do Start > Settings > Taskbar and Start Menu. Click the Advanced tab.
Click the Advanced button.
An Explorer window comes up with your menu tree as its source. In order, double-click
the Programs, and then the Accessories folder. Right-click the Notepad icon and
choose Properties. Type your preferred folder in the “Start In” text box, click
OK and Notepad will start wherever you wish. Same procedure for WordPad.
Problem: Anytime I leave my machine for awhile, and come back and disturb the mouse, (I have "blank screen" as my SS), there will be an empty box in the taskbar. It goes away when I click on it, but what's it doing there in the first place?
Possible Solution: In most cases you can clear this up by updating your video drivers or reduce the Hardware Acceleration for your Display Adapter:
1. Right-click My Computer, click Properties, and then click
the Performance tab.
2. Click Graphics, and then move the Hardware Acceleration slider two notches
to the left.
3. Click OK, click Close, and then click Yes to restart your computer.
There is also an option in Tweak UI that may help. re: "Stop processes
from stealing focus"
Problem: Needed to set a Restore point, but computer said unable to
Possible Solution: http://support.microsoft.com/support/kb/articles/q275/6/46.asp
Problem: CD's show up in explorer but will not auto play.
Possible Solution:
If the CD is determined to be an audio CD-ROM, Windows performs the
default action, if any, associated with that file type. "Play" is
normally the default action for the AudioCD file type.
Note: If the Play command is bold, the CD will play when it is inserted, if Play
is not bold, it will not. Double-click My Computer. On the Tools menu, click
Folder Options.
On the File Types tab, click AudioCD in the Registered File Types box, and then
click Edit.
The word "Play" should appear in bold in the Actions box. Click
Close.
If AudioCd is associated with Media Player the Registry entries should read:
REGEDIT4
[HKEY_CLASSES_ROOT\AudioCD]
@="AudioCD"
"EditFlags"=hex:02,00,00,00
"BaseClass"="Drive"
"MPlayer2.BAK"="AudioCD"
[HKEY_CLASSES_ROOT\AudioCD\DefaultIcon]
@="quartz.dll,-201"
"MPlayer2.BAK"="C:\\WINDOWS\\SYSTEM\\shell32.dll,40"
[HKEY_CLASSES_ROOT\AudioCD\shell]
@="play"
"MPlayer2.BAK"="play"
[HKEY_CLASSES_ROOT\AudioCD\shell\play]
@="&Play"
"MPlayer2.BAK"="&Play"
[HKEY_CLASSES_ROOT\AudioCD\shell\play\command]
@="\"C:\\PROGRA~1\\WINDOW~1\\wmplayer.exe\" /device:AudioCD
\"%L\""
"MPlayer2.BAK"="C:\\WINDOWS\\cdplayer.exe /play %1"
Problem: Scandisk keeps locking up on me when I run it.
Possible Solution:
Delete the Windows Applog folder from DOS. Insert your WinMe boot disk and
restart, select: Minimal from the menu. (Type and press Enter after each
command) From A:\
C:
cd\windows
deltree applog
Restart via Ctrl-Alt-Del, and run Defrag again.
Problem: What is the Applog folder and will deleting it cause any problems with my system.
Possible Solution:
Windows tracks your program usage in the
background. It then stores this info in the Applog folder. When you run Defrag,
this info is used to "optimize" the programs you use most often, so
that they load faster.
The Applog folder usually gets corrupted on a bad shutdown or total crash, where
the system does not properly record the "usage info". Note: in most cases
you can spot the corrupt file, where it will contain a "~" in the filename.
Deleting the folder really does no harm, however this needs to be done from
Dos.
Problem: My Control Panel is missing.
What can I do to get it back?
Possible Solution: Click Start, Click Run, type Regedit (hit enter). Drill down to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Look for the value “NoControlPanel” If
the Control Panel has been disabled, the value will be 01 00 00 00.
To re-enable it, change the value to 00 00 00 00 or simply delete it.
Problem: My Quick Launch toolbar disappeared, and when I try to create one, WINME simply displays the error message: Cannot create toolbar for "
Possible Solution: This behavior can occur if the Quick Launch folder has been deleted. To resolve this issue, recreate the Quick Launch folder. To do this, perform one of the following procedures:
Create a folder named "Quick Launch" (without the quotes) at the following location:
C:\Windows\Application
Data\Microsoft\Internet Explorer\
-or-
If you are currently using Windows
Profiles, create the Quick Launch folder at the following location:
C:\Windows\Profiles\[profile
name]\Application Data\Microsoft\Internet Explorer\
Where [profile name] is the name
of the currently logged on user name. (Do not include the brackets)
Problem: Hello, for a long time now I have not been able to
CTRL+ALT+
Possible Solution: **THE FOLLOWING IS
EXPERIMENTAL**
I have no solid data on it yet, except that it hasn't interfered with my
computer running and has introduced no new problems.
**I REPEAT, THE FOLLOWING IS EXPERIMENTAL. USE AT YOUR OWN RISK.**
Several suggestions have been floating around the newsgroups recently of some
Registry changes to address this. I've compiled them into a single Reg file. I
installed the file on my computer. I have so few occasions of this kind of
problem that, in the almost-week they've been in place, I haven't had a single
problem situation to test, so I haven't the slightest idea if they really do
anything. But they haven't (on my computer) causes any problems.
BACK UP YOUR REGISTRY. Then, if you wish, run the attached Reg file.
If you choose to use this, I would appreciate any feedback on the results, if
any. (speedshut.zip)
Problem: After installing Windows ME the modem on the PC began
to answer all incoming calls.
Possible Solution:
Add the string "AT S0=0" in the "Extra Settings" field of
the modem properties
dialog. "S0=0" sets the modem not to answer incoming calls and
overrides the initial setup of the modem.
This "Extra settings" input field for a modem in Windows ME is found
here:
Control Panel/Modem/Properties/Connection/Advanced
.
Problem: I have a problem updating WinME. One day I clicked on the update icon in the
start menu and a page came up with this message: “Your organization has decided
to provide software updates internally rather than through Windows Update. To
download updates for your Windows computer, please see your Network
Administrator". I don't have an administrator just a server-Prodigy.
Possible Solution: http://support.microsoft.com/support/kb/articles/q283/2/88.asp
It appears that this same
error message is given if the file wupdinfo.dll is either missing or
damaged. I would therefore suggest that you check for this file and
replace with a new copy from your Me cab set (either from the WinME CD or from
the ..\windows\options\install folder).
1. Click on Start\Search\For Files and Folders.
2. Type wupdinfo.dll into the Named field.
3. Make sure that it is looking in your C: drive and click Search Now.
4. If it finds this file, right-click and Rename it to wupdinfo.old. If
you do not find it, then continue on with the next step.
5. Close the Search window.
6. Now click on Start\Run and type MSConfig in the blank and click OK.
7. This open up the System Configuration Utility. Here you need to
click on "Extract File" on the General tab and then type wupdinfo.dll
in the blank. Then click Start.
8. Now click the down arrow to the right of the Restore from box and this
should display the path to your install files, if not browse to their location
(or the CD containing them).
9. Now click the Browse button to the right of the "Save files
in" box and browse to C:\Windows\system
10. Click on OK to accept the location to extract the file.
11. Click OK to accept the Backup folder to store the old file,
12. When the file has been extracted successfully, then, again, click on
Start\Run again.
10. This time, type in "regsvr32 wupdinfo.dll" and click
OK. This will register that file.
11. Now go back to the Windows Update site and see if this has resolved
the error.
Problem: My image preview has just decided to stop previewing
gifs
Possible Solution: To repair image view:
Start / Run:
regsvr32 thumbvw.dll
That should fix it
Problem: Favorites no longer show up when I go to Start,
Favorites. Only the Media, Channels, etc. folders show up, nothing else. They
are still in the Favorites folder in Windows and do show up in Favorites from
within I.E., but not from the start menu.
Possible Solution: If you have used a program
called Microangelo to remove the shortcut arrows from shortcut icons, restoring
the arrows also restores the Favorites back into the Start Menu Favorites
folder.
Problem: Why can’t
my machine hibernate?
Possible Solution: Click Start, Click Run and type "NOHIBER.TXT" and it
will tell you what’s holding
things up. Most common cause is the audio driver.
Problem: What does
the ‘Universal Plug and Play’ option in Windows ME do? Should I instruct Windows to install it?
Possible Solution: Don't bother with it. It has no real use yet... here's a
run-down:
Universal Plug and Play (UPnP) is a new standard for network devices (and
networked computers). It actually has nothing to do with what most people
think of as Plug and Play (or Pray). UPnP allows networked devices to
identify themselves and their services across a network without the usual
necessity of client computers loading hardware drivers. The idea is that
any computer that supports UPnP would be able to use a device on the same
network without installing drivers for that specific device. That's just
one example. UPnP has other features as well.
Basically, UPnP is available in Win ME (as you have noticed) but there is no
reason to enable it. There are very few (actually I don't think there are
any) devices that even support the standard yet. The version of UPnP that
comes with Win ME doesn't even support all the features that are defined in the
UPnP specification...
Here's some more info if you're interested:
http://www.upnp.org/
-or-
http://support.microsoft.com/support/kb/articles/Q262/4/58.ASP
Problem: When I try to access the Microsoft help and Support
function in the start menu I get the "Page cannot be displayed"
message.
Possible Solution: If you are using Easy Cleaner, go to its UNDO folder, and
double-click on the undo.reg files you see. To stop Easy Cleaner from doing
this, enter HELP in the SKIP window of the "Clean Registry" function.
Problem: When I try to print in IE 5.5 SP1 by hitting the print
icon, my system freezes and I need to hit the reset button. I can print
in all other applications. I have WinME w/HP 932c installed
Possible Solution: Go to the font’s folder and delete a font called BDDenver which is
corrupted. That's all it took. Hope that's all it requires for you.
Problem: When I try to restore my computer with the system
restore program, instead of letting me select a day to restore from, it shows a
box with the date
Possible Solution: http://support.microsoft.com/support/kb/articles/q275/6/46.asp
Problem: When trying to install Internet Connection Sharing, I get the following error message: “Netconn has caused an error in Netconn.exe”
Possible Solution: Try finding Netconn.exe in your C:\Windows directory and
double-clicking it. If the error still occurs, delete Netconn.exe, and then
click Start, click Run, type MSCONFIG (hit enter), click the Extract File
button, type in NETCONN.EXE as the file you would like to extract, click the
button labeled ‘Start’, type the path to your WinME installation files where it
says ‘Restore From’ (example: D:\Win9x), and type in ‘C: \Windows’ where it
says ‘Save File In’ and click OK.
Naturally, back up
registry, move copy of deleted keys to desktop before removing.
Delete
HKEY_LOCAL_MACHINE,System, CurrentControlSet, Services,
ICSharing (the whole thing).
In addition to removing the
whole ICS Sharing folder,
HKLM\System\CurrentControlSet\Services\ICSharing (entire folder),
Remove
HKLM\System\CCS\Services\RemoteAccess\LocalNameResolution (all keys)
Extract ics.inf, icshare.inf and icsharep.inf to a temp folder (like
C:\ICS)
Problem: I still have problems with Netconn.exe
causing a crash.
Possible Solution: Start/Settings/Control Panel/Add-Remove Programs/Windows Setup – remove
ICS. Do not reboot.
Click Start, click Run,
type Regedit (hit enter)
HKEY_LOCAL_MACHINE,System,CurrentControlSet,Services --
Remove ICSharing key
Under Class, noted number
of folders under NETTRANS key.
Don’t close, just go to
next step.
Under Network properties:
Add protocol called NETBEUI
Remove all instances of TCP/IP
Click OK DO NOT reboot.
Back to Regedit, press F5
to refresh the screen. Remove all
folders under NETTRANS key that WERE there before. Do not remove the new keys. They might be at the end, or in the
middle. Don’t remove the new NETBEUI
folders.
Back in Network properties,
add the TCP/IP protocol. Be sure that File and Printer Sharing is not present
(this is a must), and delete the NETBEUI protocols.
Start/Settings/Control
Panel/Add-Remove Programs/Windows Setup – Communications – select ICS. Click OK,
Click OK.
ICS should run
perfectly. Then open network properties
and add File and Printer sharing.
Problem: Why does my
computer take forever to update hardware information?
Possible Solution: This problem is caused by an incompatibility with Norton 2000 and
Windows ME. Norton creates several
thousand 0 byte files in your C:\Windows\Inf directory. You must delete these.
More info on this problem and how to prevent it from occurring in the future
can be found here: http://service1.symantec.com/SUPPORT/nunt.nsf/docid/2000120915010309&src=w
Problem: What is
causing the creation of 0k temp files in
the C:\Windows directory with names such as the following,
fffe309b_{CB3586A9-A2AD-46AC-B5DF-FDF81CF1326F}.tmp
fffe30ef_{2ACF0CDB-B4A4-44B6-8489-9C1E43F7D06F}.tmp
fffe30ef_{48729DDC-175A-4CCD-846C-E037E29503F9}.tmp
Possible Solution: Disable Machine Debug Manager
(MDM.EXE) using MSCONFIG, under the Startup tab. Also, in Control Panel /
Internet Properties, on the "Advanced" tab, there's a check box for
"Disable Script Debugging". If that's not checked, it could
still start the Machine Debug Manager even after you have unchecked it from
MSCONFIG. . For more information, please visit http://support.microsoft.com/support/kb/articles/Q221/4/38.ASP
.
Problem: Internet Explorer has small buttons now. How do I change
them back to the larger buttons?
Possible Solution: Open a folder, go to view, toolbars, customize, and choose show text
labels.
Problem: Windows
Media Player 7 constantly crashing.
Possible Solution: Remove all items from Startup (using MSCONFIG) and see if the problem
still occurs. Software called AYPaste is known to cause this behavior.
Problem: While
transferring large files from one PC to another, the network speed seems to
drop and the process seems to take much longer than it should.
Possible Solution: Limit Windows VCACHE setting to 32 Meg regardless of the
amount of RAM on the system. I suggest
you download and install Cacheman (www.outertech.com).
This application lets you change the VCACHE settings easily. Set maximum and
minimum disk cache to 32768 and CHUNKSIZE to 512.
Also, I got off the phone
with the upper level tech of Microsoft and my problem with FA310 is that mine
are C1 or C2 hardware versions which are NDIS (Network Driver Interface Specification)
3. WinME needs NDIS 4 and "prefers" NDIS 5. To see what
NDIS your network card is go to regedit LOCAL MACHINE>System>Current
Control Set>Services>Class>Net>0000>Ndi>Interfaces
You
can see if your network card is on the Hardware Compatibility List that
Microsoft certifies at: http://www.microsoft.com/hcl/default.asp
Problem: Why is my hard drive constantly active?
Possible Solution: When you are not using Windows, the operating system will reduce the
swap file size (since it is not being used) and the ‘System Restore’ software
is making back-ups of critical files. Also, if you have a Sound Blaster card, a
piece of software called Disc Detector constantly polls the drives for new media.
To disable this, you will find an icon in the Control Panel labeled Disc
Detector. Also, you can disable PCHEALTH from MSCONFIG and see if that helps as
well. This does not seem to affect Windows. This is a "scheduler" and
does *not* turn off PC Health. The PCHealth entry in MSConfig & the Task
Scheduler is *only* for data collection. "pchschd.exe" launches
winmgmt.exe to collect this data if the system is idle. Quite unnecessary for
the vast majority of users of Me.
Problem: I am running
Windows Me and until recently when you inserted a CD it would automatically
start. Suddenly that does not happen. I have to start it
manually. I have checked to see that the Auto Insert flag is checked in
device manager and it is. Does anyone have any idea why this would happen
or a work around?
Possible Solution: Type REGEDIT in the run box, then open HKEY_CURRENT_USER, Software,
Microsoft, Windows, Current Version, Policies, Explorer. Right click on
NoDriveTypeAutoRun to MODIFY the setting to 95 00 00 00
CD-ROM Does Not Run Automatically When Inserted
http://support.microsoft.com/support/kb/articles/q177/8/80.asp
----------------
Values of note:
95 HD and CD are autorun (default)
B5 HD is, CD is not autorun (after TweakUI 'Paranoia')
BD HD is not, CD is not autorun (suggested value)
9D HD is not, but CD is autorun (if you like CD autorun)
00 Everything is autorun
FF Nothing is autorun
---------------
Tweak turns off to disable a CD auto-play of Audio?
HKEY_CLASSES_ROOT\AudioCD\shell default = "play" (to auto play
audio cds) or ..default = "" (to not)
Problem: I can only hear CD’s using Windows Media
Player 7. No other software works when trying to play audio CD’s.
Possible Solution: Go into Control Panel, System, Device Manager, highlight your CD player, go into Properties. Under the Properties tab, enable Digital CD Playback.
Problem: No matter
what I set the access privileges for in network control panel, after I shut
down the machine and log back in again the access goes back to user-level. It
will not stay on share-level no
matter what I do.
Possible Solution: Try making the change in Safe Mode and then re-starting in normal
mode. Be sure to click OK after making the change.
To start Windows Me in Safe mode:
1. Click Start | Shut down | Restart | OK.
2. Hold down the CTRL key until the Windows Startup Menu appears.
3. Enter the number for Safe mode and press ENTER.
Problem: Why can’t I see computers listed in my network
neighborhood, but I can find them using the Search function?
Possible Solution: the problem might be that during the set up of Home Networking
Wizard, Microsoft somehow names your Workgroup to be "Mshome" (the
default value) EVEN THOUGH you have specified your own name. Here is the
fix:
- Start -> Run -> regedit
- Find "Mshome" (which should be in My
Computer\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\VNETSUP)
- Right click on Workgroup (on the right hand panel) -> Modify
- Change the "Value Data" to whatever your Workgroup Name is.
Under the DNS tab for the
TCP/IP stack of the NIC card I had the host name for my router instead of the
name of my computer. All of my windows boxes were misconfigured that way
but only WinME complained about it. I changed the host name to match the
name of the computer and everything is working just fine. You might also try
adding these lines to your registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Network\Real
Mode Net]
"preferredredir"="nwredir"
"Autologon"="1"
"transport"="*nwlink,*netbeui,"
"netcard"=""
Problem: My A: drive keeps being activated even though I am
not using it. How can I prevent this from occurring?
Possible Solution: Click Start, Click Settings, Click Taskbar and Start Menu, Click the
Advanced tab, Click the button labeled “Clear.”
Problem: NetBEUI is
not in the list of network protocols available
Possible Solution: Click Start, click Run, type MSCONFIG (hit enter), click the button
labeled “Extract File…” For the name of the file you want to restore, type
NETBW.INF. Restore from your Windows Millennium CD (if your CD is your D:
drive, type: D:\WIN9X). Save File In: C:\WINDOWS\INF
Once the file is restored,
repeat this process with NETTRANS.INF, and then once more with RPCLTC5.DLL,
only extract this file to C:\WINDOWS\SYSTEM. Then back in your network
properties, click Add, click Protocol, click Add, click the Have Disk button,
click the Browse button, go to C:\Windows and on the left you should see
NETTRANS.INF, click once on it and click OK. NetBEUI should now be available as
a protocol option in your network properties.
Problem: When I reboot my Windows ME, sometimes I get a whole
lot of the following messages: “windows could not upgrade the file %1 from %2
%1:%2” What is causing this?
Possible Solution: You have disabled SYSTEM RESTORE and you have deleted the _RESTORE
directory. As a result, Windows cannot find the directory necessary to create a
restore point.
Problem: What's the minimum and recommended ('sweet spot')
amount of RAM for Windows ME?
Possible Solution: http://promiseraid.tripod.com/info/mem1.jpg
& http://promiseraid.tripod.com/info/mem2.jpg
Problem: Windows Explorer always starts in My Documents.
How can I change that so it always starts at the root of the C: drive?
Possible Solution: Right click on the Windows Explorer icon, select Properties and
change the Target to C:\WINDOWS\EXPLORER.EXE /e,C:
/n = open with one panel
/e = open with 2 panels
No need to use both. /e will overwrite /n
explorer.exe /e,c:
explorer.exe /n,c:
See this MS KnowledgeBase article for more info: http://support.microsoft.com/support/kb/articles/q130/5/10.asp
Problem: Where can I find information about upgrading from
Windows 95/98 to Windows ME?
Possible Solution: Check here: http://www.pcworld.com/hereshow/article.asp?aid=36590
Problem: Where can I find more information about System
Restore and possibly how to disable it?
Possible Solution: http://www.3dspotlight.com/tweaks/windows/windows-2.shtml
Problem: Script Error with My Network Places
Possible Solution: You have Tweak UI installed and have changed the first item to appear
on the
desktop from My Documents to something else. Change it back to My Documents.
Problem: Windows
Update Setup says: "A previous program installation was never
completed. You need to restart your computer to complete the installation
before running Internet Explorer Setup. Setup will now close."
Possible Solution: Start - Search - Files (type) "wininit.ini" (no quotes) Right-click
and select: Rename [example - wininit.old]
Start - Search - Files (type) "ie5setup.exe" (no quotes) Right-click
and select: Rename [example - ie5setup.old]
Download a new version of ie5setup.exe from:
http://www.microsoft.com/windows/ie/download/ie55sp1.htm
Select the option to Save
to Disk [example - C:\Download]
Next, clean out the *entire* contents of Windows\Temp
Next, clear your temporary Internet files
Internet Options | General tab | Delete Files button
Select the option to also delete offline items
Create a Desktop shortcut to [example - C:\Download\ie5setup.exe]
Double-click to start the install (while online)
Select the option to install the browser, and continue
Once completed, reboot and go online again.
Double-click on the IE setup Desktop shortcut,
Run the install again, select components not in bold.
Select the desired options, *only* install 1 or 2 components at a time.
Reboot and repeat as needed. Once completed delete the Desktop shortcut
Delete the *entire* contents of Windows\Temp again.
Clear your temporary internet files again.
Problem: Cannot
enable DMA on hard drive.
Possible Solution: You must contact the manufacturer of the hard drive and download the
utility used to enable or disable the Ultra ATA 33/66/100 capability on drives
that support this feature. Drives are typically shipped with the fastest DMA
mode enabled. If you do not have a special 80 wire IDE cable, or your
motherboard does not support UMDA 66 or UDMA 100, you must set the drive to
UDMA 33 mode.
Problem: When I click on the Start button, the sidebar that says Win ME has disappeared and there is a long bar of pure black.
Possible Solution: There is a minimum requirement of 8 icons being listed on the start button. If you have 7 icons or less there is no way to display the logo.
Problem: When I try to use the search function in the Start Menu nothing happens.
Possible Solution: If TweakUI is installed, go into it and click on Desktop and make sure “Search Results” is checked. MS Knowledgebase article: http://support.microsoft.com/support/kb/articles/Q274/8/47.asp
Problem: Kernel32.dll errors while running Windows Me
Possible Solution
Without precise details of error messages, it is a bit hard to diagnose, so
I'll give you my general advice for kernel32 errors and we'll take it from
there. Also, please carefully check the spelling of kernel32 (kernAl32
can indicate a virus).
Kernel32 errors are most often caused by video drivers that need updating. Note
that the memory address for video problems is 0nxx:bffxxxxx, where n is 0, 1 or
2 and x is any hex number (0-9 or a-f). Go to the web site of your video card
manufacturer and get the latest drivers for your card. Try turning down
your hardware acceleration, color depth, animated cursors, and/or screen
resolution.
Update your java VM at http://www.microsoft.com/java
Also update to the latest version of DirectX at www.microsoft.com/directx (run
dxdiag to check what version you currently have).
Have a look at these links for assistance.
Error Message: IEXPLORE Caused an Invalid Page Fault...
http://support.microsoft.com/support/kb/articles/q155/1/16.asp
Err Msg: Invalid Page Fault in Module Apitrap.dll (yes it specifically mentions
kernel32.dll as well)
http://support.microsoft.com/support/kb/articles/q224/8/13.asp
If you run Cleansweep, go to Symantec's web site, do a search for apitrap.dll
and download their version. A conflict between IE5 and Symantec's version of
apitrap has been known to trigger this error message.
And if you're running CrashGuard, turn it off. And turn off any of those programs
such as AdsOff or PopOff. They cause kernel32 problems as well.
Netsonic is known to cause problems and needs to be uninstalled. Basically
*any* internet related programs should be disabled or uninstalled - replacing
one at a time to track down the aberrant program.
There has been a run of problems caused by advert.dll and Comet Cursor.
McAfee Antivirus is now acknowledged as
causing kernel32 crashes (as at V5.1). According to McAfee they are
planning to release a patch during the final quarter of 2000. Some have solved
their problems by turning OFF the download scan option.
[Thanks go to Sandi Hardmeier, Microsoft MVP, for this tip.]
Problem: Low memory errors.
Possible Solution: Use the MaxFileCache setting in the System.ini file to reduce the maximum amount of memory that Vcache uses to 512 megabytes (524,288 KB) or less OR Use the System Configuration utility to limit the amount of memory that Windows uses to 512 megabytes (MB) or less.
Vcache is limited internally to a
maximum cache size of 800 MB.
This problem may occur more readily with Advanced Graphics Port (AGP) video
adapters because the AGP aperture is also mapped to addresses in the system
arena. For example, if Vcache is using a maximum cache size of 800 MB and an
AGP video adapter has a 128-MB aperture mapped, there is very little address
space remaining for the other system code and data that must occupy this range
of virtual addresses.
http://support.microsoft.com/support/kb/articles/Q253/9/12.ASP
Problem: When you choose shut down, the screen goes blank and you get the “Windows is shutting down”, then the screen goes black and it NEVER says “It is now safe to turn off your computer”.
Possible Solution: Go into the BIOS, select “Power Management Setup”, under “Video Off Method” choose “V/H Sync+Blank”
Problem: Computer receives a general protection fault while attempting to install Windows 98 or 95.
Possible Solution: Check voltage settings on CPU, check memory, replace CPU.
Problem: When the computer is turned on for the first time each day, the lights come on but there is no video. Turning the computer off and then back on, or pressing reset then allows the computer to boot properly.
Possible Solution: Bad power supply.
Problem: Computer beeps or buzzes intermittently while on.
Possible Solution: Bad power supply fan or CPU fan or bad keyboard (sticking key).
Problem: While doing a defrag, the computer keeps starting over, making defragmentation take forever.
Possible Solution: Press CTRL-ALT-DEL one time and select END TASK on every item that is listed EXCEPT for Explorer and Systray. You will have to press CTRL-ALT-DELETE each time after you select END TASK. Also, if your computer is on a network, unplug the cable from the back of your network card.
You can download a great utility that will close down all background programs. It is called ENDITALL and you can find it here: http://hotfiles.zdnet.com/cgi-bin/texis/swlib/hotfiles/info.html?b=pcm&fcode=0011NB
Problem: MediaPlayer 7 gives me an 80004005 error when I try to play a CD.
Possible Solution: Turn off the digital playback option
in MediaPlayer 7.
Problem: I plugged the headphones into the outlet on the CDROM player and get no sound.
Possible Solution: Turn off the digital playback option in MediaPlayer 7.
Problem: Network keeps getting disconnected or lots of collisions on hub.
Possible Solution: Plug and Play has set the IRQ or other memory address and is sharing it with another device. Both devices can not be active at the same time. I recommend setting the Network card manually using the software that comes with the card or downloading the software from the manufacturer’s web site. Use an IRQ and memory address that is not currently in use and go in to your computer’s BIOS and, under Plug And Play, select MANUAL and turn off the IRQ that you assigned to the network card.
Problem: Network is very slow
Possible Solution: Visit this page for more info: http://algi273qy50xj.bc.hsia.telus.net/network_slow.htm
Problem: How do I make a bootable floppy with Windows ME?
Possible Solution:
Just format a floppy and copy IO.SYS and COMMAND.COM from
C:\WINDOWS\COMMAND\EBD onto the floppy. Instant bootable floppy, just like
that.
Problem: When you turn the computer on, the lights come on, but there is no video.
Possible Solution: Bad monitor, bad video card or video card not seated properly, broken/bent pin(s) on monitor cable, broken/bent pin(s) on keyboard connector, switch on bottom of keyboard is set to XT instead of AT, RAM is bad or not seated properly, CPU is bad or not seated properly, power supply is bad or switch in back of power supply is set to 230v instead of 115v, CMOS may need to be cleared and reset. If this is a new system, the CPU voltage, multiplier and clock settings may not be properly set on the motherboard or BIOS/CMOS.
Problem: After installing an application such as Microsoft Word or Microsoft Excel, or Corel SmartSuite, the computer freezes intermittently in these programs.
Possible Solution: RAM is bad or not seated properly, CPU voltage, multiplier or clock settings not set correctly, bad video card or bad video card drivers.
Problem: Can not recognize printer or other device attached to parallel port.
Possible Solution: Go in to the computer’s BIOS/CMOS setup and in the section entitled Integrated Devices/Peripherals make sure that the Parallel port is enabled and set to EPP mode, if given a choice of 1.7 or 1.9, select 1.9. Do not select ECP or SPP mode. Also, possible bad cable or the cable may have a broken or bent pin. Also, possible bad printer or other device. Always make sure the device is ready, in the case of the printer, ensure the power is on, paper is in it, ink or toner is installed the Green Online light is on before starting diagnosis. A printer self-test can determine if the printer is bad. See your printer’s owners manual, or visit the manufacturer’s web site for details on how to do this with your specific printer.
Problem: Modem dials out but there is no connection.
Possible Solution: Some phone systems require you to dial a 9 first, try adding a “9,” to the front of the phone number you are dialing.
Problem: When installing a piece of hardware from on old computer to a new computer, Windows locks up or gets General Protection Faults.
Possible Solution: Find out what IRQ the hardware device is using. Some older Sound Blasters have two IRQs, one for the sound card and one for the built in controller for the CDROM. Make sure to disable both of those IRQs in your BIOS under Plug And Play (select MANUAL and turn off the IRQ(s) that the hardware device is using).
Problem: Modem says NO DIALTONE when you try to dial out.
Possible Solution: Phone cable is bad or not connected to the proper port in the back of the modem or possible bad modem or you have voice messaging or some other phone service that causes your dial tone to ‘stutter’ letting you know you have messages waiting or you are on a PBX system which requires you to dial a 9 first before getting a dial tone. In either case, you can turn off your modems ability to check for a dial tone. To do this, click on Start, Settings, Control Panel and then double-click on Modems. Make sure your modem is highlighted, if not, click once on it, and then click on Properties (NOT Dialing Properties). Click the Connection tab, and then click on the Advanced button. Under Extra Settings type in “AT X0” without the quotation marks and then click OK until you are back to the Control Panel. Close the Control Panel and try dialing out again.
Problem: One of your hard disk drives is stuck in 16-bit mode.
Possible Solution: Try going into Control Panel and re-detecting new hardware. If you are still in 16-bit mode on your hard disk drive(s), click on Start, type REGEDIT and hit Enter. Then type CTRL-F and in the field that appears type “NOIDE” without the quotation marks and hit Enter. It may take a while to search and while it is searching it may appear the computer is locked up, be patient. If it finds a NOIDE in the registry, it will highlight it. Delete this entry and then close the Registry, it will automatically save your changes. When you re-boot, all hard disk drives should be in 32-bit mode.
Problem: CDROM is in 16-bit mode.
Possible Solution: You may need an updated driver from the manufacturer if your CDROM plugs into a proprietary controller card or sound card. Also, if your CDROM has a proprietary controller card or sound card attached to it, it’s IRQ and/or DMA settings may be conflicting with the BIOS/CMOS Plug And Play settings. Make sure to disable those resources in the Plug And Play section of your BIOS/CMOS. You may also be loading MSCDEX.EXE in your AUTOEXEC.BAT. If so, edit the C:\AUTOEXEC.BAT file and type “REM” without the quotation marks at the beginning of that line.
Problem: Modem fails to respond, or is intermittent and causes lockups.
Possible Solution: The modem, if internal, is more than likely configured to an IRQ or COM port that is already in use. I recommend setting the modem to COM PORT 4, IRQ 3 and verify the BIOS/CMOS Integrated Peripherals settings have the COM PORTs defined as COM1 (2F8) and COM2 (3f8). Do not set them to AUTO (if that is an option in your BIOS/CMOS).
Problem: Sound Blaster AWE 64, no sound (speaker icon in system tray).
Possible Solution: Go into BIOS/CMOS and DISABLE ACPI. This setting can usually be found under the section entitled POWER MANAGEMENT SETUP.
Problem: What is a Cross-Over cable?
Possible Solution:
A cable sends and receives data, right? So if pin 1 and 2 send data and pins
3 and 6 receive data, when you plug it into the computers they'll butt heads.
That is what a hub, switch or router is for. On a 2 pc network, you need
the receive and send wires reversed on one end of the cable so the data being
SENT from one can be RECEIVED by the other. Otherwise you are trying to SEND
data to a computer's SEND data port.
It would be like trying to talk into the ear piece of your phone. Doesn't work
real well since that's a speaker, and not a mic. (It's an output, not an
input). You cannot plug an output into another output or an input into
another input. At least, not if you expect it to work. You must plug one output
into another’s input. Didn't your parents have this talk with you yet?
Where can I get one and how much?
CompUSA, Fry's Electronics, Best Buy... they all have those crossover cables. How much? $5-$20 depending on length.
Problem: Start button is empty, does not say “Start” and tabs in windows are blank. All buttons are blank, no text in them.
Possible Solution: Go to your display settings, click on the
Appearance tab and choose the Windows default scheme. This occurs when the text
color chosen is the same as the background color.
Problem: Drive letters opening when starting Windows
Possible
Solution: If you're using
Norton Internet Security 2001 or Norton Personal Firewall 2001, change the
settings in the program to not load at startup. Create an entry in
Start|Programs|Startup to launch the program from there. There's a timing problem, causing these
products to launch explorer windows.
The following link from Symantec's website provides a better description of the
problem and gives a link to a step-by-step fix.
http://service1.symantec.com/SUPPORT/nip.nsf/ddb3f5ca22507b08852569370052afd6/026cceacd2e609f78525695f0061c6be?OpenDocument&Highlight=0,startup
Problem: Password is not being saved and/or login screen keeps coming up when Windows 95/98 starts.
Possible Solution: There are numerous settings that need to be set correctly, so we will add/reconfigure each one to insure it is properly set.
Go to the Control Panel, double-click the icon entitled “PASSWORDS.” At the top of the screen there are tabs. Click the tab titled “USER PROFILES” and make sure the option “All users of this computer use the same preferences and desktop settings.”
Click OK.
While in the Control Panel, see if you have an icon called “TWEAK UI”, if so, double-click it, find the tab that says Paranoia, and make sure the option “Clear Last User at logon” is NOT checked. Click OK.
Back in the Control Panel, double-click on the icon titled “Network” and make sure you have the following components installed:
Client for Microsoft Networks
Dial-Up Adapter
TCP/IP
If you have any other components, remove them, these are the only three you should have (unless you have a network card or are using AOL). Check to see that "Windows Logon" is selected for the "Primary Network Logon" listed below.
Double-click "Client for Microsoft Networks" and make sure "Log on to Windows NT domain" is NOT checked. While in that window, make sure that "Quick logon" is selected. Click OK.
On the tabs at the top of the screen, select "Access Control" and make sure the option "Share-level access control" is selected.
Click OK.
If you are asked to re-boot, say NO.
Close the Control Panel.
Double-click My Computer
Double-click Dial-up Networking
You should see the icon used to dial your ISP here. Right-click on it and select PROPERTIES.
On the tabs at the top of the window, select the one that is titled “Server Types”
Under ADVANCED OPTIONS, the ONLY item that should be selected is “Enable software compression”. Please make sure that “Log on to network” and all of the other options are not enabled.
Below that, it says “Allowed network protocols”
Make sure the last option, “TCP/IP” is the ONLY item selected.
Click OK.
Close any open windows.
Click on Start.
Click on Run.
Type COMMAND (hit enter).
Type CD \Windows (hit enter).
Type EXIT (hit enter).
Run the registry editor,
open this registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\
Network\Real Mode Net
and delete the value named
"AutoLogon". This web site explains how to
do it: http://www.wown.com/j_helmig/nologon.htm#AutoLogon
Click Start
Click Shutdown
Choose “Restart”
When Windows comes back up, a login screen should be displayed. For the name, type TEST (hit enter)
For the password, type nothing, just hit the enter key.
If Windows asks for password verification, hit the enter key again.
That’s it, you’re all done! The next time you restart Windows, the logon screen should not come up, and when you dial your ISP, the option to save your password should be enabled.
Problem: Windows 95/98/ME always asks for a logon password.
Possible Solution:
To prevent Windows from prompting you for a password at startup, follow
these steps:
Click Start, point to Settings, click Control Panel, and then double-click
the Network icon.
On the Configuration tab, click to select Windows Logon in the Primary
Network Logon box, and then click OK.
When you are prompted to restart your computer, click No.
In Control Panel, double-click Passwords.
NOTE: If you cancel the network logon dialog box when you first start
your
computer, the Change Passwords tab may not be available. You must logon so
the Change Passwords tab will be available.
Click the Change Passwords tab, click Change Windows Password, select any
check box items you want to be included in the change, and then click OK.
In the Change Windows Password dialog box, type your current Windows
password in the Old Password box. Leave the New Password and Confirm New
Password boxes blank, click OK, and then click OK.
NOTE: If you have forgotten your old password, please see the following
article in the Microsoft Knowledge Base:
Microsoft's Policy Regarding Missing or Invalid Passwords
Click the User Profiles tab and verify that the All users of this PC use the
same preferences and desktop settings option is selected, and then click
Close.
On the Start menu, point to Find, and then Files or Folders. Type *.pwl, in
the Named window. Look in (all) "Local hard drives". Select Include
subfolders, and then click the Find Now button. Rename the extension on all
".pwl" files to ".old".
Shut down and then restart Windows.
NOTE: If ".pwl" files are not disabled, the passwords from
those files can
be detected by Windows and the Windows Logon request continues to appear.
If the issue has not been resolved, this issue may be caused by the TweakUI
tool in Microsoft Windows 95 Power Toys. If you have installed Microsoft
Windows 95 Power Toys, and are using the TweakUI tool, please see the
following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q135586
TITLE : Hiding the Last Logged on User Name in Windows 95
For information about how to cache your Microsoft Windows NT domain
password, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q140709
TITLE : How to Cache Your Windows NT Domain Password in Windows 95/98
Problem: What’s the difference between RAM &
Resources?
Possible Solution: "System resources" are among the most misunderstood elements
of Win95 and Win98 (and most otherwise good references don't touch on the
subject -- the first two Windows textbooks I picked up don't even have
"resources," in this sense, in the index). This FAQ file is intended
to address some of the common questions about this topic.
Could someone give me a breakdown of what constitutes:
a) Windows 98 "resources" and
b) "Memory"?
System Resources are of two kinds: User Resources, and GDI (Graphic Device
Interface) Resources. In the Windows 98 Resource Kit, check the article titled
"Core System Components." Much of what follows comes from that
article. The Win98 Core consists of User Resources, GDI Resources, and the
Kernel.
"The User component
manages input from the keyboard, mouse, and other input devices and output to
the user interface (windows, icons, menus, and so on). It also manages
interaction with the sound driver, timer, and communications ports. Windows 98
uses an asynchronous input model for all input to the system and applications.
As the various input devices generate interrupts, the interrupt handler
converts these interrupts to messages and sends the messages to a raw input
thread area, which in turn passes each message to the appropriate message
queue. Although each Win32-based thread can have its own message queue, all
Win16-based applications share a common one."
User Resources are limited
to a fixed 64 KB. You cannot increase this.
"The Graphics Device
Interface (GDI) is the graphical system that manages what appears on the
screen. It also provides graphics support for printers and other output
devices. It draws graphic primitives, manipulates bitmaps, and interacts with
device-independent graphics drivers, including those for display and printer
output device drivers."
GDI Resources are limited
to a fixed 64 KB. You cannot increase this.
Why these 64 KB limits? They are used to ensure backward compatibility for
16-bit programs originally written for DOS and Windows 3.x. This backward
compatibility is one of the main reasons Windows 95/98 would be chosen by a
user instead of Windows NT (which has much poorer and less reliable backward
compatibility for 16-bit programs). Note that the 64 KB limitation on User and
GDI Resources does not exist in Windows NT (which, however, may not be able to
run some of the particular programs causing the "Resources drain" in
Windows 95/98).
The Resource Kit article
"Understanding System Performance" gives more details of this that
you might want to examine.
In contrast to this, "Memory" is generally used to mean RAM
(although, technically, there are several kinds of 'memory').
I've always kind of lumped "Resources" and "Memory"
together.
This is a very common misunderstanding.
My Resources drop as low as 50-60% a lot of the time. What's wrong? Should I
worry?
Having only 50-60% Resources available is not a problem at all. You can easily
have resources drop to 10-15% without a problem. I have run the computer with
less than that (on one occasion, as low as 0 %!). When Resources get in the 15%
range, it is maybe time to think about shutting down some programs for a while.
This does not match my experience. When my Resources get to a certain low
level, by computer starts running very slowly, or freezing, or otherwise
misbehaving. Are you sure you can run the computer with Resources that low?
Yes. I am sure -- provided Resources is the only problem. However, there are
often other things going on at the same time that Resources get low. Especially
with today's advanced hardware, users are easily tempted and encouraged to run
more and more programs, of increasing sophistication, at the same time.
Resources are consumed when this happens -- but it is not the only thing
consumed! They may be just a symptom.
At the same time the
Resources are dropping, you are probably consuming more RAM. You may be pushing
your swap file functioning much harder. Also, not all programs "play well
together." That is, some of them tend to interfere with each other
(especially if they include older 16-bit DOS or Windows 3.x programs). Using
more programs at once increases the chance that you will encounter this type of
conflict. But Resources are not the problem in this situation. (I emphasize
this because it is more likely you will find out what is really causing your
problem if you do not persist in believing it is something else!)
You may benefit from
examining how your Windows memory management is configured. Especially in
versions of Windows later than Win95, zealous memory management commonly
causes problems resulting in system slowdowns and even freezes or lockouts.
Where does one see the quantity of resources being consumed, as opposed to
"memory"? Does Norton System Doctor show you, for example?
Yes, you can set Norton System Doctor monitors for "User Resources"
and "GDI Resources." These show as "USER Free" and
"GDI Free." I recommend setting them. Also, the Windows Resource
Meter (RSRCMTR.EXE) will monitor these nicely with very little overhead; and
there are several freeware utilities that do the same thing. (Note that any
utilities to monitor resources will, themselves, consume system resources -- at
least a little.)
Why do system resources not return to their full value after I have exited all
of my programs?
There are two kinds of reasons for this: good reasons and bad reasons. These
are discussed in the Knowledge Base article "Free
System Resources Do Not Return To Previous Value." In brief,
the reasoning is this:
The "good reasons" involve particulars of how Windows handles system
initialization. Windows defers much of system initialization until the first
time a program asks for a particular service. For example, each font is
initialized when a program first asks for it, rather than initializing all
fonts at system startup. Then, if a program requests a service that uses
deferred initialization, the service remains initialized after the program has
exited -- the system resources associated with that service are not freed. The
system keeps the service initialized so that the next program that requests the
service does not have to wait for the service to be initialized. (This behavior
is by design.)
In addition, for compatibility reasons, Windows does not free system resources
abandoned by Win3.1-based programs until all Win3.1-based programs have been
closed. Only when there are no Win3.1-based programs running can Windows safely
release abandoned system resources. (This behavior is also by design.)
The "bad reasons" are that a particular program sometimes will not
free resources upon exit, as it is supposed to do, perhaps because it was badly
written. This is, surprisingly, relatively rare.
How is one supposed to handle applications that consume large resources?
Be careful about loading several of them at once. These resources are finite.
Programs with heavy graphics demands are among the biggest hogs (GDI resources
usually go down faster than User resources, at least where heavy graphics
demands are involved). Heavy multimedia use puts demands on both. (See the
functions of each near the top of this post for some clarification.)
According to Knowledge Base article "System Resource
Decrease After Starting and Quitting a Program," additional
decrease in resources (without their release) can occur if you start to load a
program and then quit it before it has completely started.
Can't I just
"throw" more memory at them? As it is, how can I be sure that Windows
actually uses my 128 MB of RAM?
You cannot effectively throw RAM at resources, because the size of the two
categories of resources is limited to a specific amount. Whether you have 16
MB, 128 MB, or 1,024 MB of RAM will not affect this.
Are there any third party
apps that allow one to successfully "handle" such resource-guzzling
applications?
There are programs that claim to do this, but probably Win98's resource
allocation cannot be improved while maintaining full backward and lateral
compatibility. Memory managers and resource managers are, first of all,
programs that demand memory and resources! Secondly, they don't tend to work
that well (if at all). And one thing that is certain is that they cannot
increase resources per se. Note that Win98 releases resources back to the
system far more efficiently than Win95 did, though there are still limits to
this and you ultimately will need to reboot. (I have to do this about every 5-6
days of normal use.)
It seems that "resources being drained" and "memory
disappearing" into the murky waters of Windows 98 are two entirely
separate entities!
Absolutely! You've got it!
Source: James A. Eshelman - http://www.aumha.org/a/resource.htm
Problem: How do I get in to my computers BIOS?
Possible Solution: Below is a list of possible solutions from major manufacturer’s
brands of PCs.
Acer
www.acer.com
Aspire
1. Reboot using Ctrl-Alt-Esc.
2. Use the arrow keys to highlight System Security and press Enter.
3. Find On Board Communication Ports and then use the arrow keys to highlight
Operation Mode.
4. Use the left/right arrow keys to set the operation mode to Extended
Capabilities Port.
5. Press Esc and select Yes when asked to save the settings.
Compaq
www.compaq.com
Presario 7100
1. Turn on (or reboot) your system.
2. Press
3. Select Advanced System Settings.
4. Select Integrated Peripherals.
5. Select LPT Extended Mode.
6. Press the Space Bar to select ECP.
7. Press F10 and select YES to Save and EXIT.
Dell
www.dell.com
Dell's web page has instructions for each one of their computers. As a generic
example, try this:
1. Turn on (or reboot) your system.
2. When prompted, press
3. Press Alt-P to get to Screen 2.
4. Use Tab to move to Parallel Mode.
5. Use the arrow keys to set Parallel Mode to ECP. (If your computer doesn't
have ECP, set the mode to PS/2 to get bi-directional functioning.)
6. Press Esc to exit the system configuration.
Gateway 2000
www.au.gw2k.com
To tell what kind of BIOS you have, reboot your computer and watch the screen
carefully. If one of the first words you see is
with
1. If you are in Windows, exit to DOS.
2. Press Ctrl+Alt+Esc. If this doesn't work, follow these steps.
3. Leave the computer turned on and use the key to lock the keyboard.
4. Press the Reset button on the front of the computer. A message will display
asking you to unlock the keyboard.
5. Unlock the keyboard and press F2.
with AMI or Award BIOS
1. Press the Reset button on the front of the computer. Watch the screen. After
the memory count is complete, a message appears about pressing Delete to enter
the setup program.
2. Press Delete. After a few moments a menu appears on the screen.
3. Move the highlight bar to RUN CMOS SETUP and press Enter. If you are
prompted to choose Standard or Extended setup, choose Standard.
an EISA computer
Press the Reset button on the front of the computer, then press Ctrl+Alt+Esc
immediately when the memory count begins. EISA bus computers usually require a
separate diskette or CD-ROM to permanently change the system configuration.
If Ctrl+Alt+Esc doesn't work, try Ctrl+Alt+S.
Hewlett-Packard
www.hp.com
HP Vectra
1. Reboot your computer.
2. When the bottom of the Hewlett-Packard System Hardware Test screen displays,
press F2.
3. Use the arrow keys to highlight Parallel Port Mode.
4. Use F7 and F8 to switch settings. Set to
Bi-directional ECP, if available
Bi-directional, if necessary
HP Pavillion
1. From Windows, click Start, click Shut Down, click Restart, and then click
Yes.
2. At the HP Blue screen, press F1 to enter CMOS.
3. Use the arrow keys to highlight the appropriate setting.
4. Press F10 to Save and Exit, and then press Enter.
IBM
www.ibm.com
Aptiva
1. Reboot using one of these three methods
a) Press Ctrl-Alt-Del.
b) From Windows, click Start, click Shut Down, click Restart, and then
click Yes.
c) Turn off computer, wait 30 seconds and then turn it back on.
2. When you see the Blue IBM screen and memory counting, press F1 to enter the
configuration utility.
3. Once you're in the configuration utility, you will see many choices.
a) Use the up and down arrow keys to highlight Parallel Port Mode.
b) Use the left and right arrow keys to switch choices until Extended
Capabilities Port (ECP) mode is highlighted, and then press Enter.
Micron
www.micron.com
with
1. Reboot using Ctrl-Alt-Del or the Reset button.
2. During the POST test (memory count), press F2.
Packard Bell
www.packardbell.com
Hardware Setup Program
1. Reboot your computer.
2. Press F1 or F2 (depends on your computer) before you hear the beep as the
system boots up.
Problem: What is the difference between Windows ME and Windows 2000?
Possible Solution: Visit here to learn about the differences: http://www.dell.com/us/en/biz/topics/vectors_2000-w2kvsme.htm
