building construction Construction in timber and brick

Timber construction underwent slow development in this period. Scandinavian stave churches of heavy timber were built from the 11th through the 14th century, prior to the triumph of the stone church, and about 30 have survived to the present day. In western Europe, particularly from the 14th century onward, half-timber construction emerged as a new form of house building. The continental type had a frame of squared timbers, with vertical posts spaced about one metre apart and horizontal girts spaced at the same distance; diagonal braces were run through the outside walls for lateral stability. The roof beams spanned between the ridgepole and the walls; floor beams were supported on the walls and interior partitions. The English half-timber frame was similar, but it eliminated the horizontal girts and diagonal bracing by using closely spaced verticals about one-half metre apart. In both systems the space in the outside wall was filled with an enclosure material to impart added rigidity to the frame; brick or wattle and daub were often used. All the timbers of the frame were attached together by elaborate dovetail, or mortise-and-tenon, joints. Half-timber framing would remain the standard way of building with wood in Europe until the 19th century. There was also considerable use of heavy timber for the roofs and floors of masonry buildings, which was influenced by shipbuilding technology. A particular instance of this is the English hammer-beam roof, which was a kind of corbeled truss that could span quite long distances. The roof of King Richard II’s Westminster Hall in London (1402), with a 21-metre (70-foot) span, is an excellent example of this type.

Fired brick began to be made again in Europe in the 14th century, preceded in many areas by the use of salvaged Roman brick. The 14th-century bricks were not as precise as the Roman and were often distorted in firing. Therefore, large lime-mortar joints were needed for regular course lines. Bricks became nearly standardized at something close to the present size, about 20.3 × 9.5 × 5.7 centimetres (8 × 3.75 × 2.25 inches), and bonding systems based on this approximately 2:1 proportion were developed. These bonding patterns reduced continuous vertical mortar joints, because the mortars were of substantially lower strength than the bricks and vertical joints could form planes of weakness in the walls where cracks might develop. The best bonding pattern was English bond, in which all the bricks in each course overlapped the ones below and vertical joints were entirely eliminated. Brick remained quite expensive because of the cost of the fuel needed to fire it, and it was used mainly where there was no readily available stone. In the late medieval period and mostly in northern Europe, brick was adapted to Gothic stone forms to build so-called hall churches, with naves and aisles of equal height.