Your location:       | Reset
 

Comcast 3 in 1 Universal Remote Control


You will need Adobe Acrobat Reader to view the Remote Codes. If you don't have Acrobat Reader installed, you will need to download it now.

Printable version of all codes is available here.

TV Setup | AUXiliary equipment Setup | Searching for a Code | Checking the Codes
Changing Volume Lock | Reassigning Device Keys | Programming Channel Control Lock

Device Codes:
TV | VCR & TV/VCR Combo | DVD | Home Theater | Audio Amplifier | Audio Receiver | PVR

TV Setup

  1. Turn Your TV ON.
  2. Find the codes listed next to the brand of TV.
  3. On the remote, Press and Release the TV key.
  4. Press and hold in the SETUP key, until the TV key flashes twice, then release the SETUP key.
  5. Using the number pad, enter in the first 4-digit code found next to your brand. The TV key will flash twice after the last number entered if this was done correctly.
  6. Aim the remote at your TV and press the Power Key. If the TV turns OFF, you have found the right code. If the TV does not turn OFF, repeat steps 3 through 6 using the next code listed for your Brand.

Auxiliary Equipment (audio receiver, CD/DVD player, VCR) Setup

  1. Turn Your Auxiliary Equipment ON.
  2. Find the codes listed next to the Brand of Auxiliary Equipment.
    Audio Amplifier Codes
    Audio Receiver Codes
    DVD Player Codes
    Home Theater Codes
    PVR Codes
    VCR & TV/VCR Combo Codes
  3. On the remote, Press and Release the AUX key.
  4. Press and hold in the SETUP key, until the AUX key flashes twice, then release the SETUP key.
  5. Using the number pad, enter in the first 4-digit code found next to your brand. The red light will flash twice after the last number entered if this was done correctly.
  6. Aim the remote at your Auxiliary Equipment and press the Power Key. If the Auxiliary Equipment turns OFF, you have found the right code. If the Auxiliary Equipment does not turn OFF, repeat steps 3 through 6 using the next code listed for your Brand.

Searching for a code

If your home entertainment device does not respond to the remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

Example: You've tried all the codes for your TV, but you still cannot get the remote control to operate your TV.

  1. Turn on your TV.
  2. On the remote control, press TV once.
  3. Then press and hold SETUP until the TV key blinks twice, then release the SETUP key.
  4. Using the number pad, enter 9-9-1. The TV key will blink twice.
  5. Aim the remote control at the TV and slowly alternate between pressing Power and TV. Stop when the TV turns off after pressing the POWER key. This means that a working code has been found.
  6. Press the SETUP key once to lock in the code. The TV key will blink twice.

Note: Use the AUX key to program the remote for an audio receiver or DVD player.

Checking the Codes

If you have set up the remote control using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV:

  1. Turn on your TV.
  2. On the remote control, press TV once. Then press and hold Setup until the TV key blinks twice, then release Setup.
  3. Enter 9- 9- 0. The TV key will blink twice.
  4. To view the code for the first digit, press 1 once. Wait 3 seconds and count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the left- most TV Code box (at end of this section).

Note: If a code digit is "0", the selected mode key will not blink.

Repeat step 4 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. To check another device code, repeat steps 1 to 5, but substitute the AUX key for the auxiliary device you are checking.

Changing a Volume Lock

The Comcast Custom 3-Device universal remote control is set at the factory to control the TV volume in all modes. However, you may change the Volume Lock setting to Individual Volume Unlock to unlock a specific device's volume controls for independent operation in its own mode (e.g., Audio Receiver volume controls in the AUX mode). Or, if desired, you can perform Global Volume Unlock so that the volume controls of all devices can be independently operated in their own modes.

Unlocking Volume Control For A Single Device (Individual Volume Unlock):

  1. Press a desired mode key where you want volume to be unlocked (e.g., AUX) and controlled within its own mode.
  2. Press and hold SETUP until the selected mode key blinks twice, then release SETUP.
  3. Enter 9- 9- 3 and then press VOL- once. The mode key will blink four times confirming unlock.
    If desired, repeat steps I to 3 (of this section) for each device that you want volume to be unlocked.

Now, after you select a device that has volume unlocked (e.g., AUX), pressing VOL+, VOL-, or MUTE will control the device's volume only in its own mode.

Unlocking All Volume Controls (Global Volume Unlock):

  1. Press and hold SETUP until the selected mode key blinks twice, then release SETUP.
  2. Enter 9- 9- 3 and then press VOL+ once. The mode key will blink four times confirming unlock.

Now, volume controls for all devices can be independently controlled in their own modes.

Locking Volume Control To TV Mode (Restoring Global Volume lock To The Default Mode):

  1. Press TV once.
  2. Press and hold SETUP until the TV key blinks twice, then release SETUP.
    Enter 9 -9 -3 and then press 1V once. The mode key will blink twice confirming global lock.

Now, when you press VOL+, VOL-, or MUTE the volume of the selected device (e.g. TV) will be controlled regardless of the mode you have selected.


Reassigning Device Keys

The Comcast Custom 3-Device universal remote control can be set up to control a second device. For example, to have the unit control a TV, a Cable Box, and second TV you will need to reassign the unused AUX key to operate the second TV as follows:

  1. On the remote control, press AUX once. Then press and hold SETUP until the AUX key blinks twice, then release SETUP.
  2. Enter 9 -9 -2. The AUX key will blink twice.
  3. Press TV once, then press AUX once. The AUX key will blink twice.

The AUX key is now ready to be programmed for your second TV. See setting up your AUXiliary equipment (audio receiver, CD / DVD player).

Programming Channel Control Lock

By default, the remote control's channel- control capabilities are locked to the Cable Box. The affected keys are 0 -9, CH+, CH-, Enter, and Last. This will guarantee that you do not inadvertently change a channel while in the TV mode. However, you can turn off this feature to allow full access to these keys in the TV and Cable modes.

Note: This feature does not affect the AUX mode.

De-Activating Channel Control Lock:

  1. On the remote control, press Cable once. Then press and hold Setup until the Cable key blinks twice, then release Setup.
  2. Enter 9 -7 -3. Press CH- once. The Cable key will blink four times.

Now, the remote control will provide TV or cable channel control capabilities while in the TV or Cable mode.

Re-Activating Channel Control Lock:

  1. On the remote control, press CABLE once. Then press and hold SETUP until the CABLE key blinks twice, then release SETUP.
  2. Enter 9-7-3 and then press CH+ once. The CABLE key will blink twice.

Now, regardless if you select the TV or CABLE mode, only the channel control capability of your cable box will be accessible.