Japanese
41 cm/45 (16.1") 3rd Year Type
40 cm/45 (16.1") 3rd Year Type
Updated 19 April 2007

These were the first large-caliber guns designed entirely in Japan.  They were mounted afloat only on the Nagato class, but had been planned for use on the Kaga, Amagi and Kii classes of the early 1920s, all of which were cancelled as a result of the Washington Naval Limitation Treaty.  Those completed guns and mountings intended for the cancelled ships were then used as coastal artillery, with three twin turrets covering the southern entrance to the Sea of Japan, including one at Pusan, Korea.

These guns were generally similar to British wire wound guns of the time but were of lighter construction, being about an inch (25 mm) less in diameter at the muzzle than the 15"/42 (38 cm) Mark I.  This may indicate that they were not wire wound over their full length.  Used a Welin screw breech but with an Elswick 3-motion short-arm mechanism, which resembled that used on the British 18"/40 (46 cm) guns of 1917.  A total of about 40 guns were manufactured at the Kure and Muroran Ironworks.

Originally designated as 41 cm/45 3rd Year Type.  Redesignated as 40 cm/45 3rd Year Type on 29 March 1922.  Actual bore diameter was 41.0 cm (16.14 inch).

Some of the APC shells for these guns were converted into aircraft bombs and then designated as Type 99 (Model 1939) No 80 Mark 5.  It is believed that one of these destroyed USS Arizona BB-39.  In 1942 the design was modified and bombs built to this new design were designated as Type 2 (Model 1942) No 80 Mark 5 Model 1.

WNJAP_161-45_3ns_Nagato_bow_pic.jpg

Bow Turrets of IJN Nagato

.
Click here for additional photographs
.
.
Gun Characteristics
.
Designation 41 cm/45 (16.1") 3rd Year Type (Model 1914)
40 cm/45 (16.1") 3rd Year Type (Model 1914)
Ship Class Used On Nagato, Kaga, Amagi and Kii Classes
Date Of Design 1914
Date In Service 1921
Gun Weight 100 tons (101.6 mt)
Gun Length oa 741.7 in (18.840 m)
Bore Length 720.24 in (18.394 m)
Rifling Length 615.3 in (15.629 m)
Number Of Grooves (84) 0.161 in deep x 0.345 in (4.1 mm x 8.754 mm)
Lands 0.259 in (6.58 mm)
Twist Uniform RH 1 in 28
Chamber Volume 28,505 in3 (467.11 dm3)
Rate Of Fire 1.5 - 2.5 rounds per minute
Notes:

1) Firing cycle was 21.5 seconds at low elevations, which probably means at the loading angle of +3 degrees.

2) US Naval Technical Mission to Japan report O-54(N) states that guns meant to be loaded at high elevations had "ridges around the compression slope, to aid in gripping the projectile rotating bands and prevent the projectile from slipping back after seating."

.
Ammunition
.
Type Bag
Projectile Types and Weights
(see Notes 1 and 2)
Prior to World War II
   APC Type 3 - N/A, but probably 2,205 lbs. (1,000 kg)
   APC Type 5 - 2,205 lbs. (1,000 kg)
   APC No. 6 / Type 88 - 2,205 lbs. (1,000 kg)

World War II
   APC Type 91 - 2,249 lbs. (1,020 kg)
   Common Type 0 HE - 2,069 lbs. (938.5 kg)
   Common Type 3 IS - 2,072 lbs. (940 kg)
   Illum - N/A

Bursting Charge APC Type 91 - 32.8 lbs. (14.89 kg)
Common Type 0 HE - 97.7 lbs. (44.3 kg)

Others - N/A

Projectile Length APC Type 91 - 68.4 in (173.85 cm)
Common Type 0 HE - 55.1 in (140 cm)
Common Type 3 IS - 70 in (160 cm)

Others - N/A

Propellant Charge World War I:  494 lbs. (224 kg)

World War II:  483 lbs. (219 kg) 102 DC1 or 110 C2

Muzzle Velocity APC Type 3 - N/A, but probably 2,592 fps (790 mps)
APC Type 5 - 2,592 fps (790 mps)
APC Type 6 / Type 88 - 2,592 fps (790 mps)

APC Type 91 - 2,645 fps (806 mps) [new gun]
APC Type 91 - 2,559 fps (780 mps) [average gun]
Common Type 0 HE - 2,641 fps (805 mps)
Common Type 3 IS - 2,641 fps (805 mps)
Illum - 2,297 fps (700 mps)

Working Pressure 19 - 19.5 tons/in2 (3,000 - 3,070 kg/cm2)
Approximate Barrel Life 250 - 300 rounds
Ammunition stowage per gun About 90 rounds
Notes:

1) IS is my abbreviation for the incendiary shrapnel round (sankaidan) intended for AA use.

2) The APC Type 3 was adopted in 1917.  This was superseded by the APC Type 5 which was adopted on 15 June 1925 and was in turn superseded by the APC No. 6 which was adopted on 17 November 1928.  APC No. 6 was essentially similar to the Type 5 in terms of armor penetration but was better protected from premature detonation and had enhanced underwater performance.  APC No. 6 was redesignated as the Type 88 on 6 April 1931.  On that same date, the improved APC Type 91 was adopted.  By World War II, APC Type 5 was only used by the coastal artillery units.  Dye was introduced in 1941 and Type 91 shells containing it were designated as Type 1.

3) Type 91 shells were all 6 / [infinity] crh with boat tail and two copper driving bands.  The diameter of the bourrelet was 16.11 in (40.919 cm).  AP Cap, cap head and windshield together weighed 358 lbs. (162.4 kg).

4) The propellant charge was in four bags.  Bags had a single 8.8 oz (250 gm) black powder igniter patch.

5) The Shômeidan B1 Illumination round had an illuminating power of 5.3 million candelas.  The maximum ballistic range was 24,900 yards (22,770 m).

.
Range
.
Elevation
With 2,249 lbs. (1,020 kg) APC
Striking Velocity
Angle of Fall
2.5 degrees
5,470 yards (5,000 m)
2,247 fps (685 mps)
3.4
5.7 degrees
10,940 yards (10,000 m)
2,001 fps (610 mps)
7.5
9.2 degrees
16,400 yards (15,000 m)
1,768 fps (539 mps)
11.8
13.5 degrees
21,870 yards (20,000 m)
1,624 fps (495 mps)
17.5
18.8 degrees
27,340 yards (25,000 m)
1,526 fps (465 mps)
24.5
25.5 degrees
32,810 yards (30,000 m)
1,516 fps (462 mps)
34.0
43.0 degrees 
(max elevation
of turret)
42,350 yards (38,725 m)
---
---
.
Elevation With 2,069 lbs. (938.5 kg) HE
Range @ 43.0 degrees 33,930 yards (31,025 m)
.
Aircraft Bombs
.
Characteristic
Type 99 (Model 1939) No 80 Mark 5
Type 2 (Model 1942) No 80 Mark 5 Model 1
Bursting Charge
49.4 lbs. (22.4 kg) TNA
78.7 lbs. (35.7 kg) TNA
Total Weight
1,757 lbs. (796.8 kg)
1,788 lbs. (811.2 kg)
Length oa
92.6 in (235.1 cm)
91.7 in (233.0 cm)
Diameter
16.1 in (40.9 cm)
15.9 in (40.4 cm)
Nose thickness
19.17 in (48.7 cm)
11.97 in (30.4 cm)
Notes:

1) These bombs were rated as being able to penetrate 5.9 inches (15 cm) of armor plate.  Height for this performance is not available but was probably around 10,000 feet (3,000 m).

2) An aluminum plug was used between the burster and the cap as a shock absorber.

3) Both types had two base fuzes to ensure detonation.

.
Mount / Turret Data
.
Designation Two-gun Turrets
   Nagato (4), Kaga (5), Amagi (5) and Kii (5)
Weight 1,004 tons (1,020 mt)
Elevation
(see Note 1)
Original design:  -5 / +30 degrees

Nagato class as modernized:  -3 / +43 degrees

Coastal Defense turrets:  -2 / +35 degrees

Rate of Elevation 5 degrees per second
Train about +/- 130 degrees
Rate of Train 3 degrees per second
Gun Recoil N/A
Loading Angle
(see Note 2)
Original:  -5 to +20 degrees
As rebuilt:  +3 degrees
Notes:

1) During modernization work in 1934, turrets taken from the unfinished battleships Kaga and Tosa were installed onto these ships.  The elevation of these mountings was increased by deepening the gun wells and lowering the revolving structure deeper into the ships.

2) The design of this mounting was very similar to that for the British 15"/42 (38 cm) Mark I.  For example, like the British gun, the rammers were mounted on a continuation of the slide and could ram at any angle of elevation.  Difficulties with this method, probably similar to those found by the British, led to the rebuilt mountings having a fixed loading angle of +3 degrees.  The mountings were powered from a hydraulic ring main.  The training gear used a worm drive which was subject to wear problems.  A double longitudinal bulkhead separated the two guns and also the working chamber where shells and charges were transferred from lower to upper hoists.  Shell rooms were above the magazines.

3) Run out was by compressed air.  Gun elevation was by cylinder and piston attached to the rear of the slide.  Each gun loaded from a cage which contained the shell and all four charges laid end to end in a flash tight compartment.  This allowed the charges to be rammed in a single stroke.

4) The gun axes were 96 in (244 cm) apart.

5) The coast defense mountings are thought to be those originally intended for either Kaga or Tosa.  These turrets were more rectangular in appearance and were powered by individual oil hydraulic units rather than by a ring main.

6) The US Naval Technical Mission to Japan report O-47(N)-1 states that "Japanese major caliber turrets (14 and 16-inch) are all of old design and were copied from the British-built turrets for the BB Kongo.  In general arrangement and in most details, they are similar to the British 15-inch turrets, but some improvements have been made by the Japanese . . .[including] Better flash tightness in gunhouses and working chambers.  All battleships were fitted with longitudinal flashtight bulkheads between the guns, and between the gun loading hoists in the working chambers. . . In the 16-inch turrets, the gunloading cages are designed to hold four one-quarter charges end to end, thus enabling a full charge to be rammed with a single stroke of the rammer."

.
Data from
"Naval Weapons of World War Two" by John Campbell
"Battleships:  Axis and Neutral Battleships in World War II" by W.H. Garzke, Jr. and R.O. Dulin, Jr.
"The Japanese Ships of the Pacific War" by The Koku-Fan
"Japanese Cruisers of the Pacific War" by Eric Lacroix and Linton Wells II
---
US Naval Technical Mission to Japan report O-19:  Japanese Projectiles General Types
US Naval Technical Mission to Japan report O-47(N)-1:  Japanese Naval Guns and Mounts-Article 1, Mounts Under 18"