Sun Oct 18 2009
awminto2<at>gmail.com BSA Valuations
I have just imported two BSA's into Australia (Perth)from the US and
my shipper wants Australian valuations so that I can pay customs duties...(not
just the US valuation). RedBook does not list them! Any ideas where
I can get a reasonable valuation?
Best regards, Andrew
Mon Oct 05 2009
barbaratravis1<at>adsl.virgin.net m20 tuning for the road
they are certain things you can do to get alot more out off a m20,to
get a possible 80 to90 mph 1:CHANGE THE FRONT SPROCKET TO A GOLDIE SPROCKET
23T 2:A10 DOUBLE VALVE SPINGS (YOU WILL HAVE TO MAKE THE CUPS YOUSELF)
this will cure the valve bounce 3:take up the carb from a 26ml to a 30ml
carb what you need to do is make a manifold tract grading down from a 26ml
to a 30ml I found the best results where to have a 4 inch tract 1inch of
manifold to 1ml off carb 4: you can,t use a compasit head gasket it will
just blow through you need to make a solid copper gasket this is best witha
ally head.By just doing these few things you will have a M20 what you will
have hours of fun with ,or before I forget a small mega go,s down well
with it but alas not with the police.....trav....
Sun Oct 04 2009
stephen96007<at>aol.com seat stencil
Hi I sell the stencils that make the logo on the back of the
motor cycle seats. I have all bikes from Honda to Yamaha BSA to Norton
and Triumph. let me know if you have faded logos and what kind you need
I will make you a deal on the ones you need. Thank-you
Tue Sep 15 2009
andwat23<at>hotmail.com My Dad's BSA
BSA YUW 987 A10 or A7
A couple of years ago I posted a message asking if anyone knew the
whereabout of a motorcycle my dad used to own which was sold on after he
passed away I included a picture and the reg No. which I now know to be
wrong so I am sending an update... the correct registration should be YUV
987 not yuw 987 as in the photo
Thu Sep 03 2009
bsa brigand sales brochure 50cc 1981
hola soy juan carlos, from Cordoba Argentina, I want to know if anyone
has the manual and a cylinder with piston and rings new to sell a sales
brochure brigand bsa 50cc model 1981, I expect answers jc
BSA_1981_Brigand_50cc.jpg will be posted-0910
Mon Sep 07 2009
h.l.orchard<at>derby.ac Bsa M22
Just wondering what todays value should be on a M22, runs well, new
exhaust, smart looking etc?
Wed Jul 29 2009
I have a BSA that is completly in pieces possible some parts missing
.need a manual and model description can you help. Frame no 15-5785 BSA.
Adelaide South Aust.
Unfortunately BSA is completely in pieces ,I have found extra no's
that under the seat on the frame .
D6.782 on one side No329046 on other side.
Thu Jul 09 2009
rhdmgman<at>hotmail.com 1937 BSA WM 20
Picture of 1937 BSA WM 20 I took in Rothenburg ODT in September 2003,
if interested for gallery.
Wed Jun 17 2009
mackenziedavid<at>rocketmail.com BSA ???
I've done up an old BSA moped and need some parts. I found out that
I need a new piston and cylinder head. I'm not sure about the model it
must be rare. The fuel tank is the acctual frame. I've been looking for
parts every where. It's probably around 1960. Thanks,
Fri Jun 12 2009
ourdeserttown<at>hotmail.com Need Some Help
A 65 LB ####
I looked on the engine and the frame. I have been looking on
the internet to figure out what the LB stands for or how many were made.
I did find A65LB-101 under 1968 on page 7 of the attached file. I can't
find any information on the A65 LB. Is this a rare bike? It
was the bike my father raced back then. Help!
Mon May 18 2009
gtx467<at>yahoo.com 1969 BSA serial number
BSA Royal Star A50R
If I have a BSA Royal Star 500 with the serial number,A50RA10...y,
what year is it? They say its a 1969, and looks like a 1969, but the engine
number is A50RA10...y, Help.
Tue Apr 28 2009
radicali<at>sbcglobal.net cylinder configuration
bsa 441 victor
good day: what is the difference between the round and square barrel?
Mon Apr 27 2009
bellset<at>wbs.co.za 1938 BSA C10 250cc
BSA C10 1938
I am contacting you on behalf of a friend who has one of these and
is looking for any information that will assist him in restoring this bike.
Any help will be appreciated. many thanx.
Wed Apr 15 2009
jr68ioweu1<at>aol.com OILS 62 RGS
BSA Rocket Gold Star 650cc
Can I safely run SAE 50 wt Kendall oil in my 62 650cc Rocket Gold Star.
Riding temps in my area are 65 to 75*- I have run Ken-40 wt, for
37 years, now they are reducing the Zinc ( anti scuff, cam & lifters
) from 1.6 ppm to .96 ppm. THANKS BILL SEATTLE WASHINGTON
Sat Mar 28 2009
Can you please guide me where I can get Head/Block, carb/air filter,
clutch plates and exhaust (pipe and silencer). My bike is lying in
need of these.
Thu Mar 12 2009
dhpatna<at>yahoo.com parts required
1956 c10L side valve
required bsa 2.5hp block & head
Mon Mar 16 2009
ivan.guada<at>tiscali.it What BSA is this?
Good morning my name is Ivan and I'm italian from Milan, please I want
to know what BSA model is this, year and the possible valutation. I hope
that you will be able to help me. Best regards. Ivan
Sat Mar 07 2009
knappen_ryanhotmail.com bike value
BSA Starfire 250cc
what is the retail value of a 1969 bsa starfire 250cc? also, where
is there listings of classic bike values, as kelley's blue book online
only goes back to 1989?
Wyoming, Michigan, USA
Sun Feb 08 2009
bsaocmembsecwaitrose.com new website address
Just to inform you that the British BSA Owners Club has changed its
website address. We can now be found at www.bsaownersclub.co.uk
please update any links you may have to our site and let your members
Feb 7th 2009
Lot 190 1951 BSA MOTORCYCLE ONCE OWNED BY STEVE MCQUEEN,
250cc C11 model, restored condition. British racing green, chrome tank
with green and gold accents, Avon "speedmaster" tires on chrome wheels
with green spokes, drum brakes, fender license "tag" mount, classic spring
seat. Signed off title currently in Barbara McQueen's name. PROVENANCE,
Owned by Steve McQueen during the filming of the 1963 movie "The Great
Escape," where he purportedly drove this BSA on the "set" for personal
transportation. The bike remained in a airplane hanger (with others) until
it was sold to sheriff John Gillespie (a friend of Steve's). It was then
sold to a local gentleman who has consigned it to O'Gallerie. Estimated
selling price: (40000 - 60000)
To be sold by O'Gallerie, 228 NE 7th Ave., Portland, OR, 97232. (888)
238-0202. Auction will be held on Monday, February 23, 2009 at 7 PM, PST.
Preview will be Friday, Feb. 20 from 6-9 PM, and Saturday & Sunday,
Feb. 21 & 22, from noon to 5 PM. Questions and bidding information
is available at www.ogallerie.com,
or by emailing info AT ogallerie.com.
Sun Feb 01 2009
karki_saroj29hotmail.com spare parts
piston ring B.S.A. C.15
i need some spare parts of bsa c15 ASAP
Wed Jan 21 2009
nikos.mamoudisgmail.com BSA Sloper
in my possession is a BSA 'Sloper' 1929 as a was told from my Grandfather
who gave it to me, I am trying to restore it , but several parts are missing,
could I have some suggestions of where to find its manual and spare parts
????? photo will be posted asap
Mon Jan 05 2009
goldenstreamyahoo.com Need to know year and model
BSA either C15F1166 or C15.46991
Those are the only numbers I can find on the bike. Can you tell me
what year and model or any info on it?
Belize, Central America
I cannot identify your bike from
those numbers. This page has information on BSA engine & frame numbers:
serial number information
Mon Jan 05 2009
www.baggyeyesyahoo.com bsa 71 lightning
Why are 71 lightnings so hard to find? Does anyone that has one wants
to keep it,or are they junk? I own one with 13k miles,no complaints! please
help me out with any info. Thanks.
By 1971, sales of British machines were in decline due
to the Japanese onslaught. In that year (or perhaps the following year),
I was overtaken by two Honda Fours whilst riding in rural Tasmania on my
BSA Lightning. I had absolutely no hope of catching them, I was totally
outclassed. Furthermore, if you were going to buy a British twin, you'd
probably opt for the more reliable and better looking Triumph. Ed.
Thu Jan 01 2009
pjjlobo.net Parts catalogue
1930 BSA Sloper S30-13
Does a Parts catalogue with the parts pictured exist for the Sloper
Tue Dec 09 2008
ivesandyhotmail.com BSA Dandy circa 1958
I have a 1958 BSA Dandy, does anyone know the approx value restored
Also where the best contacts are for spares.
Wed Dec 03 2008
kencodygmail.com rear suspension
BSA C11G 1955
I need the plunger columns,part no: 90-4117 or 90-4121.
Can anyone help?
Sat Nov 29 2008
pauloleal1hotmail.com escape e uma tampa
bsa 175.bartam super model D7
precisava de asber o preÃ§o do escape,tampa do lado direito
quem esta de frente para a moto,e platinados.obrigado.
Sat Nov 15 2008
bobandpegcenturytel.net Idenify Year by Frame & Motor Number
BSA Gold Star
i am trying to learn year of my bsa gold star the frame number is CB32.8807
Motor number is DBD-34GS-4254. I would appreicate any help anyone could
Thank you. Bob Russell
Thank you for responding, I will attempt to send a picture of the bike.
I am also in need of parts for this bike, they are as follows, if you have
any ideas please let me know:
Front Forks both right and left part number 67-5009 I believe
Rear Fender complete with all brackets part number for complete set
is 42-6845 but I am not sure
Any help you can give will be highly appreciated.
Mon Nov 10 2008
gargoylethecatyahoo.com Classic BSA
BSA Star Scrambler
I have a BSA C15S. I'm trying to find what year it is by the serial
number. The link for after 1960 is not working. The # is C15S4419. Can
anyone help? I need to know the year for sales reasons.
Port Charlotte, FL
Thu Nov 06 2008
k-kingnf.sympatico.ca rear fender
looking for rear fender to fit a 1954 bsa c11g part 29-6817
Mon Nov 03 2008
bsa zb32 1951
I have a goldstar B32 1951
Chassis No. zb32 * s * 3551
Engine No. zb32 gs * 3551 *
in good condition
How can I sell?
I also have an engine of a BSA C11
and as' its value?
Thanks if you can help
Wed Oct 22 2008
BSA B33 SPECIAL [poorman's goldstar
i have grafted a4valve pushrod weslake head and a home made alum cylinder,using
an 86mm ducati piston, onto my b33 engine.the only problem is i'm getting
oil seeping into my combustion chambr.draninidge arangement from the head
Tue Oct 14 2008
dimkonsympatico.ca what year is this bsa
B.S.A. 650 Lightning
I recently acquired a 650 Lightning without an ownership and I am trying
to determine what year it is. The frame # is DE04537A65 and the motor
# is PE020537A65
Wed Oct 08 2008
kenowskicharter.net help me fix my bsa!!!!
1968 bsa 865lightening
hello I have a 1968 BSA A65L with no spark. I replaced the ignition
with a boyer bransden MKIII, PODtronics power unit. new plugs and battery
and still have no spark do you know why it will not start??Thanks.
Suggest you start by going back
to points ignition and work from there. Alternatively, take it to a knowledgeable
Mon Sep 22 2008
proshine_chrisbellsouth.net what is my bsa worth?
I HAVE A BSA. IT'S ENGINE SAYS A65T3729. A500 3729. IT
HAS 3600 MILES ON IT AND HAS BEEN GARAGED BUT SITTING SINCE 1976. I'M TRYING
TO FIND OUT IT'S MODEL, YEAR AND WHAT IT IS WORTH.
Fri Sep 12 2008
adriandunn6075.freeserve.co.uk handbook or manuel
1980 bsa gt 50
any thing to do with itilian bsa motorcycle
Mon Sep 08 2008
kevincantlehotmail.com Gearbox oil
Can anyone tell me what oil to use in my C11G gearbox
Sat Aug 30 2008
ericstockleyyahoo.com BSA engine model and year numbers
I just got a BSA chopper thats been in a shed for 20yrs.The engine
model numbers say A65RC can anyone tell me what this stands for,thank you
Wed Aug 27 2008
mwilson77att.net 1964 BSA Lightning Rocket
BSA Lightning Rocket
It's a beautiful bike I've ridden since college. Rebuilt the motor
to standard cyclinders. What should I sell it for.
Tue Aug 19 2008
BSA Star Twin????
Inherited what appears to be a 60's era BSA in boxes. Engine
has number A50.284 and H.C. is stamped on. No frame numbers found.
Does anyone know what the engine may have come from origionally?
Mon Aug 11 2008
1954 BM 20s
i like to know anything about this moto.the numbers of this moto is
BM20s-2112 and BM 21-2963
Thu Aug 07 2008
alexsaceblacktop.com Bike ID
BSA Lightning and ???
Recently acquired two BSA's. Is there a site that shows original description
of how they left the factory? Eng A65LA 15079-Y Frame A65LA 15079/Eng
A50B225 Frame A50B 976. What is the A50B?
Tue Aug 12 2008
albertinvnsilkgmail.com BSA 350 cc plunger shocker
Engine No.BB319733 and Chasis No.BB3159115 Model required for the above.
Today morning I sent you one message giving only engine no. Now
I have given you both engine & chasis no. can you let me know
the year of manufacturing and the model. I am attaching two photos
for your observation.
Mon Aug 04 2008
nik.wallisexcelsiorbikes.co.uk BSA Brigand
Hi, I see you have a copy of the BSA Brigand brochure, I am currently
restoring one and could do with some good pictures, is it possible to email
me some scans ?
Sorry, no, I don't have a copy
Thu Apr 17 2008
gene.berghoffgmail.com BSA Spitfire Gas Tank
Do you know anyone that makes a gas tank for a BSA Spitfire that looks
like the original and that won't leak - maybe out of metal.
Wed Apr 16 2008
yytwanadoo.fr parts for BSA Brigand
I am looking for blinking lights for a BSA Brigand
Wed Apr 16 2008
chantally95yahoo.co.in BSA sticker on the tank
i have a BSA B40 and i am looking for the BSA sticker on the tank please
tell where i can get that with itz price including custom and duty.
Thu Apr 10 2008
zrxpilot4gmail.com 1937 BSA 500
BSA M22 ?
I want to get this special motorcycle running ! I have NO manuals.
Can You help? Will need Parts,especially wheels/spokes,
thank you, Jonathan ( in Iraq)
Sun Apr 06 2008
paul.banksausawd.com Engine and Frame numbers
G'day from down under, I have aquired aBSA C11 from a family member,
unfortunatley the bike in in bits, may I enquire concerning the identity
of the bike. The engine number is ZC11 20428 and Frame number 9-4052. (I
think the stated frame number maybe a part number) Thank you for your assistance.
Wed Mar 26 2008
vancenkarasbcglobal.net 1965 bsa 175 Trail Bronc
I have looked all over and not found much info on this bike.
I wanted to know how rare this bike is and where I could see any info on
any that have sold in the past. Any info would be great!!!!!
U.S. , Ohio
Sat Mar 15 2008
BSA 650 LIGHTING
THE BIKE RUNS WELL UNTIL YOU TURN IT OFF THEN IT DOESN'T WANT TO START.
PUT A NEW SET OF PLUGS IN IT. FIRES RIGHT UP. TURN IT OFF AND HAVE TO PUT
NEW SET OF PLUGS IN TO GET IT STARTED AGAIN. DO YOU HAVE ANY SUGGESTIONS
MC ALESTER, OK
Mon Mar 17 2008
BSA Lightning or Thunderbolt
I bought my first bike (it was a BSA) when I was 18 in 1962. I'm 63
and I've been riding for over 45 years. I own an 06 Harly V-Rod with a
Porsche-designed engine that has 120hp and does an 11 sec quarter-mile.
It's just not the "real me". I always loved my BSA. I want about a 1966
to 1970 Lightning (or possibly a Thunderbolt) in excellent condition. I'm
not one of those "investors" who run the prices up for the rest of us,
I'm just an old beezer lover who wants one to ride every day. Anyone interested
in my V-Rod? It's advertised in CycleTrader.com and HDTrader.com (check
it out) and priced very competitively at $12,995. I'd love to accept a
1966 to 1970 BSA Lightning or Thunderbolt in excellent condition as a trade-in
plus the difference. Call (954) 306-2047 and leave a message. Best way
to reach me is via e-mail
Davie (Ft. Lauderdale) Florida
Mon Feb 25 2008
blkohlhoffsmartchat.net.au Identify year and model
BSA A 50A
Can you tell me the year and model of this 500cc and whether it was
for the UK home market or export?? Thanks Bryan
Would need full engine &
frame numbers to have any chance, photos will certainly help too.
Does Engine No A508160 help at all, the bike is expected this coming week
when I'll be able to check out the frame details??
Thu Feb 28 2008
deborahamesallegiance.tv 1972 BSA A65H
BSA NONE IN 1972
I am trying to locate info about a 1972 BSA cafe racer I purchased.
It has a fiberglass tank & is literally a "cafe racer" style m/c. I
will borrow a camera & send pics if needed. But can you help?
Shawnee, Oklahoma USA
A65H sounds like a Hornet, but
without images and both engine and frame numbers impossible to say more.
Wed Feb 20 2008
croesshotmail.com bsa sloper
bsa s30-13 sloper
i am searching for a original handlebar for a sloper 1930.
can anyone help me?
an drawing will also be ok.
Tue Feb 19 2008
john.grantbtinternet.com FRAME IDENTIFICATION
BSA Trails bike
I have the frame for a BSA trails bike - believed to be 1958 duplex
frame and solid rear end. I was told it was one of only 40 made. Can anyone
help me identify it.
PS no frame number evident
At the moment it is frame and forks only ( I think the forks are from
a roadgoing B31). I was told it was for a BSA "trails" bike ( but that
might also mean a "scrambler").
It is a duplex frame so takes later "swinging arm" engines.It has a
solid rear end - so it does not have either the plunger or swinging arm
suspension associated with the @1958 years.
I cannot find any frame number - certainly not on the headstock.
A rebuild will be a long term project -reliant on finding odd bits
a autojumbles. I just wanted to know a more positive identification for
Tue Feb 19 2008
andyking3btinternet.com Paint colour codes
BSA 1959 Bantam
Hi i am looking for the colour codes, reference for the red.
The mudguards & side panels are red, the tank is red with white
Hope you can help.
Wed Jan 30 2008
steve.borlacetiscali.co.uk can any one help
bsa m21 1953
Hi can any body help i was riding my bike all was well until the headlamp
fell out i stopped and replaced lamp but when i restarted my bike it had
no power and started to overheat i know that it pulled the choke cable
and also some wires but as i have reffited these i am wondering if it could
have pulled the advance and retard so hard that it my have damaged the
magneto has any one heard of this happening or any help would be greatly
thasnks for your help
Mon Jan 28 2008
espejosjchotmail.com JUAN CARLOS
BSA BRIGAND 50 CC TRIAL 1981
HOLA SOY JUAN CARLOS DE CORDOBA ARGENTINA TENGO UNA BSA BRIGAN 50CC
Y QUISIERA CONTACTARME CON ALGUIEN POR EL TEMA DE REPUESTOS Y CHARLAR SOBRE
EL TEMA YA QUE NO PUEDO DAR CON NADIE QUE TENGA UNA DE ESTAS,LES AGRADECERE
RESPUESTAS Y AQUI LE MANDO FOTOS...
JUAN CARLOS TORRES FRANCO R.A
Jan 24 2008
subject: bsa c11g 1954
r.r6bigpond.com message: Clutch problem, New corks, flat plates, Initial disingage
OK after gear selected violent engagement on release of clutch, on re engagement
of clutch lever _cluth will not disingage can you offer any suggestions?
Sun Jan 13 2008
marklibertasbodyworks2.co.za dating a bsa motor cycle
i live in south africa and have just found above bike i would like
to date it for restoration purposes eng no zc107575 thanks
paarl south africa
Tue Jan 08 2008
Hi i have a bsa motobike but i dont nfind the manuals of dtge engine
And I tri to fix it
So I find this numbers un the frame xb31 6385
and in the engine
It�s a 250cc
With suspencion in the tail.
Pleace help me to find the manuals or the motheol or some thing to
help me to fix it
Thenks for all