Technical Info

International Judging System (IJS)

The information on this page is intended as a general overview of the international judging system (IJS) to help you understand the basics of the system. This information may, at times, not reflect any updates on usage, calculation and events of the IJS. This page was last revised Aug. 17, 2012.

For more detailed information, please visit each specific disciplines' section located on the left sidebar. These sections provide links to all U.S./ISU documents that delve deeply into the IJS, including grades of execution, levels of difficulty, etc. If you are interested in all ISU documentation, visit the ISU website at www.isu.org.

Usage of the International Judging System
The international judging system will be used at:

• Regionals and sectionals - all qualifying levels and all disciplines (in all rounds)
• Synchronized sectionals - intermediate and above events including adult and collegiate
• Adult sectionals - championship, masters and gold levels of singles (qualifying and nonqualifying events)
• U.S. Junior Championships - all events
• U.S. Championships - all events
• U.S. Synchronized Skating Championships - intermediate and above events including adult and collegiate
• U.S. Adult Championships - championship, masters and gold levels of singles and pairs, and the championship, masters, gold and pre-gold levels of dance (including masters open dance)

Internationally, usage of the IJS is mandatory for all ISU events and international competitions. ISU member nations are free to use the system (or variation thereof) of their choice at national events.

How the International Judging System Differs from the 6.0 System
The international judging system is based on cumulative points, which are awarded for a technical score and five additional program components - skating skills, transitions, performance/execution, choreography/composition and interpretation. The exception to this is the pattern dance event competed at the juvenile, intermediate, novice and adult levels, which uses four components: skating skills, performance/execution, interpretation and timing.

If a skater performs more than the defined "well-balanced program" elements, there are no deductions, but the values of additional elements will not be calculated into the skater's score. (The exception to this is ice dancing, which takes a 1.0 deduction for each extra element.) If a skater performs less than the required elements, they receive fewer points, not deductions.

Anonymity of Judges Under the International Judging System
U.S. Figure Skating has maintained that the judges' identities will not be anonymous in U.S. Figure Skating events. The judges' names and their scores are linked together.

Snapshot of Officials and Scoring

At competitions scored with the international judging system, there are two panels of officials - the technical panel and the judging panel..

The technical panel is generally made up of five persons: technical specialist, assistant technical specialist, technical controller, data operator and video replay operator. This panel works in direct communication with each other as each skater performs a program. In real time as the skater performs, the technical specialist identifies the elements the skater performs. For example, for spins, they identify the type of spin and the level of difficulty of that element based on published pre-set criteria. The work of the technical specialist allows the judge to concentrate on marking the quality of each element. Technical specialists have to meet certain qualifications and pass writter and oral exams to be appointed to the position. Most technical specialists are national and international skaters or coaches and are involved in skating on a regular basis. When an element is identified by the technical specialist it is also referred to as the "call".

The assistant technical specialist and the technical controller support the technical specialist to ensure that any potential mistakes are corrected immediately. The technical controller is the leader of the technical panel. Any element can be reviewed by the technical controller, the technical specialist or the assistant technical specialist. All final decisions made on elements and levels will be made from the majority opinion of the three technical positions. At the U.S. Figure Skating Championships, each of these people are recorded with an audio tape during each program, and video clips are available to verify the calls. The elements are available for review after a skater's performance and calls can be changed accordingly. Calls and scores are final once they are posted, any protests for calculation errors resolved, and results are announced to the public. A technical panel error correction protocol outlining the types of calls that can and can't be changed and the timeline for making changes is posted on the U.S. Figure Skating website is posted on the U.S. Figure Skating website.

The video replay operator does exactly what it seems! If a video system is being utilized at a competition, this person tags each element on the video while a program is being performed. This allows the technical panel to go right to the beginning of an element during review without having to fast forward or rewind, speeding up the process significantly. The video is available to the technical panel for their review of any element to ensure that the correct assessment of the element was made. If there is video replay available to the judges, this videotape can be viewed by the judges for their analysis of the quality and/or errors made on any given element.

The data operator enters all the coding for the elements onto either paper or the computer as they are performed and the levels of difficulty are assigned.

The judging panel is made up of a referee and multiple judges. There can be as few as three (at nonqualifying competitions) or as many as nine (at championships) judges on a panel. At ISU and U.S. Figure Skating Championships, an assistant referee might also be assigned to the judging panel. The judges focus totally on scoring the quality of each element and the five program components. Their marks are based on specific criteria for each element and provide a comprehensive assessment of each skater's skills and performance. A computer is used to keep track of the elements and scores, record results and calculate totals to determine the order of finish.

The referee is the leader of the judging panel and is in charge the event. In this role, the referee is responsible for making sure rules are followed, taking the time of the program as skated, and deciding on any protests with respect to the event. The referee is also responsible for taking certain deductions.

Technical Score
In the Technical Score, each element of a skater's program is assigned a base value. These element base values give the skaters credit for every element they perform. A group of experts, including experienced skaters and coaches, has determined the element base value of each technical element. These base values are published as part of the scale of values (SoV).

Some elements such as spins and step sequences have been assigned a level of difficulty. These elements are assigned their base value depending on their level of difficulty as determined by the technical panel. After results are posted, skaters receive a scoring detail for their performance (typically called a 'protocol') that shows the elements and levels called by the technical panel and the marks given by the judges.

During the program, judges evaluate the quality of the elements and give a grade of execution (GOE) to each within a range of +3 to -3. These GOEs are not necessarily worth 1, 2 or 3 points, but rather they are a quality "grade" that impacts the value of elements through the scale of values. To determine the point value of an element, the point value for the GOE is taken from the scale of values and added to the base value for the element.

Let's look at some examples:

• The technical specialist identifies a jump as a triple Axel. The judge grades the quality of the jump and assigns a GOE of +1. The base value for a triple Axel is 8.5 points, and a GOE of +1 for a triple Axel has a value of 1.0 points, so the point value for the element is 9.5 points.
• The technical specialist identifies a jump as a double Lutz. The judge grades the quality of the jump and assigns a GOE of -1. The base value for a double Lutz is 2.1 points, and a GOE of -1 for a double Lutz has a value of -0.3 points, so the point value for the element is 1.8 points.
• The technical specialist identifies a spin as a level 2 combination spin with a change of foot. The judge then grades the quality of the spin and assigns a GOE of +3. The base value for a level 2 combination spin with a change of foot 2.5 points, and a GOE of +3 for a combination spin with a change of foot has a value of 1.5 points, so the point value for the element is 4.0 points.

The sum of the point values for all the performed elements together (base value + GOE) is the Total Element Score (TES), aka the Technical Score.

Program Components
In addition to the Technical Score, the judges award program component marks on a scale from 0.25 to 10 with increments of 0.25 to express the overall presentation and technical mastery of figure skating. The Program Component Score (PCS) is calculated and factored by specified percentages.

In ladies, men's, pairs and synchronized skating, the following five components are scored in the short program and the free skate. In ice dancing, these five components are scored in the short dance and the free dance:

Skating Skills
Definition: Overall skating quality: edge control and flow over the ice surface demonstrated by a command of the skating vocabulary (edges, steps, turns, etc.), the clarity of technique and use of effortless power to accelerate and vary speed.

Criteria:

• Balance, rhythmic knee action and precision of foot placement
• Flow and effortless glide
• Cleanness and sureness of deep edges, steps, turns
• Power/energy and acceleration
• Mastery of multi-directional skating
• Mastery of one-foot skating
• Equal mastery of technique by both partners shown in unison (pairs and ice dancing)
• Balance in skating ability of individual skaters (synchronized)

Transitions/Linking Footwork & Movement
Definition: The varied and/or intricate footwork, positions, movements and holds that link all elements. In singles, pairs and synchronized skating, this also includes the entrances and exits of technical elements.

Criteria:

• Variety
• Difficulty
• Intricacy
• Quality (including unison in pairs, ice dancing and synchronized skating)
• Balance of workload between partners (pairs and ice dancing)
• Variety of holds (not excessive side by side and hand in hand in ice dancing)
• Variation of speed and linking steps (synchronized)
• Variation of changes of direction and hold (synchronized)
• Difficulty and variety of entrances/exits from elements/preparation phase (synchronized)

Performance/Execution
Definition: Performance is the involvement of the skater/couple/teams physically, emotionally and intellectually as they translate the intent of the music and choreography. Execution is the quality of movement and precision in delivery. This includes harmony of movement in pairs, ice dancing and synchronized skating.

Criteria:

• Physical, emotional and intellectual involvement
• Carriage (and body alignment - synchronized)
• Style and individuality/personality
• Clarity of movement
• Variety and contrast
• Projection
• Unison and "oneness" (pairs, ice dancing and synchronized skating)
• Balance in performance (pairs, ice dancing and synchronized skating)
• Spatial awareness between partners - management of the distance between partners and management of changes of hold (pairs, ice dancing and synchronized skating)

Choreography/Composition
Definition: An intentional, developed and/or original arrangement of all types of movements according to the principles of proportion, unity, space, pattern, structure and phrasing.

Criteria:

• Purpose (idea, concept, vision)
• Proportion (equal weight of parts)
• Unity (purposeful threading)
• Utilization of personal and public space
• Pattern and ice coverage
• Phrasing and form (movements and parts structured to match the phrasing of the music)
• Originality of purpose, movement and design
• Shared responsibility in achieving purpose (pairs, ice dancing and synchronized skating)

Interpretation
Definition: The personal and creative translation of the music to movement on ice.

Criteria:

• Effortless movement in time to the music
• Expression of the music's style, character, rhythm
• Use of finesse* to reflect the nuances of the music
• Relationship between the partners reflecting the character of the music (pairs, ice dancing and synchronized skating)
• Appropriateness of music in ice dancing, short dance and free dance

*Finesse is the skater's/team's refined, artful manipulation of nuances. Nuances are the personal artistic ways of bringing variations to the intensity, tempo and dynamics of the music made by the composer and/or musicians.

Ice Dancing exception, pattern dance:
In ice dancing, the pattern dance(s) are scored on only four program components: skating skills, performance/execution, interpretation (see above), as well as a unique component: timing.

Timing
Definition: The ability of the couple to skate strictly in time with the music and to reflect the rhythm patterns and prescribed beat values of the pattern dance.

Criteria:

• Skating in time to the music
• Skating on the strong beat
• Skating the prescribed beat values for each step
• Introductory steps (dance starting on the correct measure of the music)

Totaling the competition score
The Total Element Score is added together to the Program Components Score, which are factored differently for the different disciplines (see below). Deductions are taken for rule violations. The result is the segment score.

The sum of all segment scores (for example, short program plus free skate), is the Total Competition Score (TCS). In most events segment scores are not weighted; they are simply added together to obtain the competition score. The exception to this is in ice dancing when two pattern dances are included in the event. There are other exceptions for the lower divisions. The skater with the highest competition score is declared the winner. For all factors, visit Accounting Central (Forms, Charts & Procedures -> IJS Charts and Factor Tables).

Factoring the Program Components

Ladies, Men, Pairs and Synchronized
In the ladies, men and pairs events, the five program components used are factored equally, then added together. The factored sum of the program component marks is called the Program Components Score. The idea behind factoring is to make the Program Components Score level with the Technical Score, hence granting equal importance to each. Since the perfect Program Components Score is always 50, this number is factored to roughly equal what each discipline is capable of scoring in the Technical Score. For example, in the ladies short program, women today are capable of scoring around 40 in the Technical Score. So the program components are factored by 0.8, lowering the 50 down to a 40, leveling the importance of the Technical Score and the Program Components Score. In the men's free skate, men today are capable of scoring around 100 in the Technical Score. So the program components are factored by 2.0, raising the 50 up to 100, and again leveling the Technical Score and the Program Component Score.

The following chart illustrates how each discipline factors program components in the junior and senior divisions:

Discipline	Short Program	Free Skate
Ladies	0.8	1.6
Men	1.0	2.0
Pairs	0.8	1.6
Synchronized	0.8	1.6

Ice Dancing
In ice dancing, the program components are factored separately, and then added together. In pattern dance four program components are used, while five are used in short dance and free dance. The idea behind the factoring is to place more emphasis on the components that are most important to each dance. For example, interpretation/timing is factored the highest in the short dance because interpretation of the rhythm is considered the most important piece to a short dance. While in the free dance, transitions are factored the highest because how skaters connect everything together is considered the most important. Like the other disciplines, the factors are also chosen to level the Technical Score with the Program Components Score, giving roughly equal importance to each. The following chart illustrates how each program component is weighted in each dance in the junior and senior divisions:

Program Component	Short Dance	Free Dance
Skating Skills	0.80	1.25
Transitions	0.70	1.75
Performance/Execution	0.70	1.00
Choreography/Composition	0.80	1.00
Interpretation	1.00	1.00
Timing	-	-

Conclusion
The international judging system allows for all the elements performed to have a score and a numerical value that is published. The particular value is impacted by the judges' evaluation of the quality of the element as performed. At the end, the entire performance is assessed through the five program components. The skater, at the end of the competition, is given a piece of paper which tells the skater exactly what the evaluation was on each aspect of the program - the technical elements and the program components.