Intel Atom Mini-ITX Motherboards

Intel D2550MUD2 Fanless Dual Core Atom Mini-ITX Board
Intel D2700DC Fanless Dual Core Atom Mini-ITX Board

Jetway JNC92-330 Expandable Dual Core Atom Mini-ITX Board
Jetway JNC9KDL-2550 Fanless Dual LAN Mini-ITX Board
Jetway JNC9MGL-525 Dual LAN Mini-ITX Board with 6x Serial
Jetway JNF94-270 Long Life Fanless Atom Mini-ITX Board
Jetway JNC96-525 Dual Core Atom Board with 12V DC In
Jetway JNF9C-2600 Long Life Thin-ITX Board with 12V DC In
Jetway JNF9C-2800 Long Life Thin-ITX Board with 12V DC In
Jetway JNC98-525 Fanless Atom ION2 Board with 12V DC In
Jetway JNC9C-550 Fanless Dual LAN Expandable Mini-ITX Board
Jetway JNF99-525 Fanless Dual LAN Expandable Mini-ITX Board

Intel D2550MUD2 1.86GHz Fanless Dual Core Atom Mini-ITX Board with VGA and DVI-D

Intel D2550MUD2 Fanless Atom Mini-ITX Board
£65.00 
  £78.00 inc. VAT
  IN STOCK (Checked 09:03 BST)


More images of the Intel D2550MUD2

You may also require:

2GB DDR3 1333 SODIMM for D2550MUD2
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

4GB DDR3 1333 SODIMM for D2550MUD2 (if using one SODIMM, use SODIMM slot 1)
£30.00 
  £36.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

D2550MUD2 Backplate for C1/C2-RACK Chassis
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

 

Intel D2550MUD2 'Cedar Trail' motherboard with passively-cooled dual core Intel Atom D2550 processor running at 1.86GHz and Intel NM10 Express chipset. Integrated Intel GMA 3650 Video with dual independent VGA and DVI-D interfaces and internal LVDS connector; Up to 4GB of system memory (8GB possible under Linux*); Intel 82574L Gigabit Ethernet Controller; 5.1 Channel Intel High Definition Audio (Realtek ALC662 audio codec); PCI & Mini-PCI Express connectors.

This board can be considered a replacement/upgrade for the Intel D510MO and D525MW boards (though please consider the port and chipset differences). It directly replaces the D2700MUD board.

Retail Unit complete with SATA cable, layout and back-panel stickers, product guide, Intel Express Installer driver and software DVD.

Rear Panel: VGA, DVI-D (both outputs support up to 1920 x 1200 at 60 Hz), Parallel, Combined PS/2 Keyboard or Mouse port, 4x USB 2.0, Gigabit Ethernet supporting LAN Wake with ACPI (Ping & Magic Packet), 3.5mm Line in, Line out & Mic in connectors.

Board Connectors: 24pin ATX Power connector (supports both 20pin and 24pin connectors), 2x DDR3 SODIMM Sockets; 2x SATA 3.0 Gb/s; 1x 32-bit PCI Slot; 1x Mini-PCI Express connector (support half and full length cards); 2x 9-pin Front Panel USB Headers (supporting 3 additional USB 2.0 ports); 2x 9-pin Serial Port Headers; Front Panel Header; Front Panel Audio header, Front Panel Wireless Activity LED header, Trusted Platform Module (TPM) Header, BIOS setup configuration jumper block, LVDS Flat Panel Interface supporting panels up to WXGA+ (1440 x 900), 25 MHz to 112 MHz single channel at 18 or 24 bpp, LVDS inverter power and panel voltage selection jumpers, FPD brightness connector, S/PDIF out header.

Suitable Cases: The D2550MUD2 has a standard sized heatsink - all Mini-ITX cases with a power supply will fit. The board does not have an IDE port, so IDE devices cannot be connected (e.g. the CF reader on M200, M200-LCD, M300, M300-LCD).

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

Recommended picoPSUs: All our picoPSUs will work with this board. If using one HDD, the picoPSU-80/90 and 60W/80W AC Adapter combination will be sufficient. A picoPSU with a 24pin ATX connector is not required.

Intel GMA 3650 Graphics: 640 MHz core frequency; High quality texture engine: DX9.3 and OpenGL 3.0 compliant, Hardware Pixel Shader 4.1, Vertex Shader Model 4.1; Video: Blu-ray 2.0, H.264 & VC1 hardware decoder, PAVP 1.1c, HDCP1.3.

*64-bit OS and 8GB Memory Support: We have installed 64-bit Linux with 8GB usable memory (2x 4GB SODIMMs) on this board (screenshot here). Intel's official support for this board is 4GB and 32-bit Windows (which can only address 3.5GB memory), with no official Linux support. 64-bit graphics drivers are currently not available for Windows.

Drivers: Intel D2550MUD2 product and driver pages.

Cooling: This board has no fan and will get quite warm under load. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and strongly suggest adding a fan if using a fanless case with this board (such as the M350 or Thin Client cases).

Memory Notes: The D2550MUD2 supports up to 4GB DDR3 1333/1066 memory running at 1066MHz on 2x 2GB SODIMMs or 1x 4GB SODIMM. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 SODIMMs are available here.

Intel D2700DC 2.13GHz Fanless Dual Core Atom Mini-ITX Board with HDMI, DVI-D and S/PDIF

Intel D2700DC Fanless Atom Mini-ITX Board
£69.00 
  £82.80 inc. VAT
  IN STOCK (Checked 09:03 BST)


More images of the Intel D2700DC

You may also require:

2GB DDR3 1333 SODIMM for D2700DC
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

4GB DDR3 1333 SODIMM for D2700DC (if using one SODIMM, use SODIMM slot 1)
£30.00 
  £36.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

D2700DC Backplate for C1/C2-RACK Chassis
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

 

Intel D2700DC 'Cedar Trail' motherboard with passively-cooled dual core Intel Atom D2700 processor running at 2.13GHz and Intel NM10 Express chipset. Integrated Intel GMA 3650 Video with dual independent HDMI and DVI-D interfaces; Up to 4GB of system memory (8GB possible under Linux*); Intel 82574L Gigabit Ethernet Controller; 5.1 Channel Intel High Definition Audio (Realtek ALC662 audio codec); PCI & Mini-PCI Express connectors.

This board can be considered a replacement/upgrade for the Intel D510MO and D525MW boards (though please consider the port and chipset differences).

Retail Unit complete with SATA cable, layout and back-panel stickers, product guide, Intel Express Installer driver and software DVD.

Rear Panel: S/PDIF optical audio out, HDMI, DVI-D (both outputs support up to 1920 x 1200 at 60 Hz), 4x USB 2.0, Gigabit Ethernet supporting LAN Wake with ACPI (Ping & Magic Packet), 3.5mm Line in, Line out & Mic in connectors.

Board Connectors: 24pin ATX Power connector (supports both 20pin and 24pin connectors), 2x DDR3 SODIMM Sockets; 2x SATA 3.0 Gb/s; 1x 32-bit PCI Slot; 1x Mini-PCI Express connector (support half and full length cards); 2x 9-pin Front Panel USB Headers (supporting 3 additional USB 2.0 ports); Front Panel Header; Front Panel Audio header, BIOS setup configuration jumper block.

Suitable Cases: The D2700DC has a standard sized heatsink - all Mini-ITX cases with a power supply will fit. The board does not have an IDE port, so IDE devices cannot be connected (e.g. the CF reader on M200, M200-LCD, M300, M300-LCD).

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

Recommended picoPSUs: All our picoPSUs will work with this board. If using one HDD, the picoPSU-80/90 and 60W/80W AC Adapter combination will be sufficient. A picoPSU with a 24pin ATX connector is not required.

Intel GMA 3650 Graphics: 640 MHz core frequency; High quality texture engine: DX9.3 and OpenGL 3.0 compliant, Hardware Pixel Shader 4.1, Vertex Shader Model 4.1; Video: Blu-ray 2.0, H.264 & VC1 hardware decoder, PAVP 1.1c, HDCP1.3.

*64-bit OS and 8GB Memory Support: We have installed 64-bit Linux with 8GB usable memory (2x 4GB SODIMMs) on this board (screenshot here). Intel's official support for this board is 4GB and 32-bit Windows (which can only address 3.5GB memory), with no official Linux support. 64-bit graphics drivers are currently not available for Windows.

Drivers: Intel D2700DC product and driver pages.

Cooling: This board has no fan and will get quite warm under load. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and strongly suggest adding a fan if using a fanless case with this board (such as the M350 or Thin Client cases).

Memory Notes: The D2700DC supports up to 4GB DDR3 1333/1066 memory running at 1066MHz on 2x 2GB SODIMMs or 1x 4GB SODIMM. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNC92-330 Dual Core Atom Expandable Mini-ITX Board (Low Profile Heatsink)

Jetway JNC92-330 Atom Mini-ITX Board
Long Lead Time

You may also require:

1GB DDR2 800 DIMM for JNC92-330
£23.50 
  £28.20 inc. VAT
Lead time approx 1-3 days

2GB DDR2 800 DIMM for JNC92-330
£30.00 
  £36.00 inc. VAT
Lead time approx 1-2 days

 

Jetway JNC92 Mini-ITX board with brand new low power consumption 45nm Dual Core Intel Atom 330 processor running at included. Intel 82945G (ICH7) chipset and GMA 950 graphics. Up to 2GB of DDR2 533/667MHz RAM supported; Realtek High Definition Audio; Supports Jetway daughterboard modules.

Expandable with a Jetway Daughterboard Module

Rear Panel Connectors: PS2 Mouse & Keyboard; Serial; VGA; 4x USB 2.0; 1x RTL8111C Gigabit LAN; 3x 3.5mm Audio (Line-out, Line-in and Mic-in).

Board connectors: 1x IDE 66/100/133; 2x SATA; 1x Floppy; 20 pin ATX power; 1x DDR2 DIMM socket; 2x additional USB 2.0 connectors on one 9 pin header; 2x Serial Port Headers; 1x Parallel Port Header; 1x PCI slot.

Case compatibility. Suitable cases: Most Mini-ITX cases including Jou Jye 528i, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, M200/M300/M350 (with any picoPSU), C1-RACK, Travla C146,147,159 (with universal backplate), Thin Client, Travla C158 (CD supported), Travla C137 (CD supported), Compact Wall Mount Case (with HDD). Other cases supporting standard height heatsinks.

Note: The JNC92 supports DDR2 memory up to 2GB. This is not compatible with DDR memory. Fully tested DDR2 DIMMs are available here.

Jetway JNC9KDL-2550 Fanless Dual Core Atom Mini-ITX Board with Dual LAN and VGA, HDMI

Jetway JNC9KDL-2550 Dual LAN Fanless Mini-ITX Board
£79.00 
  £94.80 inc. VAT
  IN STOCK (Checked 09:03 BST)


More images of the Jetway JNC9KDL-2550

You may also require:

2GB DDR3 1333 SODIMM for JNC9KDL-2550
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

JNC9KDL Backplate for C1/C2-RACK Chassis
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

 

Replaces the JNC9KDL-2700

Extremely versatile Jetway JNC9KDL-2550-LF Dual Core 1.86GHz Cedar Trail Intel Atom D2550 powered Mini-ITX motherboard with Fanless operation, Intel NM10 Chipset, Integrated Graphics and VIA VT1705 6-Channel Audio Codec. Supports up to 4GB of DDR3 SODIMM memory. Ports available include: 2x Realtek RTL8111EVL 10/100/1000 Base-T Gigabit LAN, 2x SATA 3Gb/s, 32-bit PCI slot.

Long Life: Product availability forecasted at least to End 2013, provisionally to End 2015.

Rear Panel Connectors: PS/2 Keyboard; PS/2 Mouse; 1x HDMI Port; 2x 10/100/1000 Realtek RTL8111EVL Gigabit LAN; 4x USB 2.0; 1x VGA Port; 3x 3.5mm Audio (Line-in; Mic-In; Stereo-Out).

Board connectors: 1x 24pin ATX Connector (works with 20pin or 24pin); 2x DDR3 SODIMM slots (2x 2GB max); 2x SATA 3Gb/s ports; 2x 9pin USB Connectors for 4x additional USB 2.0 Ports; 1x RS232 COM (Serial) Header; 1x Parallel Header; 1x 24bit single channel LVDS; 1x inverter; 1x Audio; 1x Front-Panel Connector; 1x CPU Fan; 1x Chassis Fan Connector.

Expansion: 1x 32-bit PCI slot.

Suitable cases & power supplies: The JNC9KDL-2550-LF has a standard sized heatsink and can be powered by 20pin and 24pin ATX power connectors. Compatible with all our picoPSUs and Mini-ITX cases, apart from the JC200 and JC203.

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

Box contents: Motherboard, Manual, Driver CD, I/O shield, 2x SATA data cables, Serial port to pin header cable, 40mm CPU/Chipset Fan (optional but manufacturer recommended, does not add to the maximum height of the board).

Operating/Storage: 0~40 centigrade operating temperature. -20~85 centigrade storage temperature.

Cooling: This board will get quite warm under load and is provided with an optional 40mm fan. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and suggest adding the optional fan if using a fanless case with this board (such as the M350 or Thin Client cases).

64-bit OS Support: Currently EMT64 is *not* enabled on these boards. Contact us for a BIOS update to enable 64-bit support.

Memory Notes: The JNC9KDL-2550 uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here. If using only one SODIMM, insert into SODIMM slot 2 (the lower slot).

Jetway JNC9MGL-525 Dual Core 1.8GHz Atom Mini-ITX Board with Dual LAN and up to 6x Serial Ports

Jetway JNC9MGL-525 Dual LAN Fanless Mini-ITX Board
£99.00 
  £118.80 inc. VAT
  IN STOCK (Checked 09:03 BST)


More images of the Jetway JNC9MGL-525

You may also require:

2GB DDR3 1333 SODIMM for JNC9MGL-525
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

JNC9MGL Backplate for C1/C2-RACK Chassis
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

 

Extremely versatile Jetway JNC9MGL-525-LF Dual Core 1.8GHz Intel Atom D525 powered Mini-ITX motherboard with Intel NM10 Chipset, Integrated Intel GMA 3150 Graphics and Realtek ALC662 6-Channel Audio Codec. Supports up to 4GB of DDR3 SODIMM memory. Ports available include: 2x Realtek RTL8111EVL 10/100/1000 Base-T Gigabit LAN, 2x SATA 3Gb/s, 32-bit PCI slot, Mini PCI Express socket.

Long Life: Product availability forecasted at least to End 2013, provisionally to End 2015.

Rear Panel Connectors: PS/2 Keyboard; PS/2 Mouse; 1x Serial (COM1); 1x Parallel; 1x VGA Port; 2x 10/100/1000 Realtek RTL8111EVL Gigabit LAN; 4x USB 2.0; 3x 3.5mm Audio (Line-in; Mic-In; Stereo-Out).

Board connectors: 1x 24pin ATX Connector (works with 20pin or 24pin); 2x DDR3 SODIMM slots (2x 2GB max); 2x SATA 3Gb/s ports; 1x 4pin and 1x 9pin USB Connectors for 3x additional USB 2.0 Ports total; 5x 9pin Serial Headers (COM2 supports RS232/485/422 and RS232 power, COM3-COM6 support RS232); 1x 4pin RS422/485 header (TX-RXCOM); 1x Power LED; 2x LAN Activity LED headers; 1x GPIO; 1x 18-bit single channel LVDS; 1x LVDS inverter; 1x S/PDIF Out; 1x Front Panel Audio; 1x Speaker; 1x Speaker header; 1x Front-Panel Connector; 1x 3pin CPU Fan; 2x 3pin System Fan Connectors.

Expansion: 1x 32-bit PCI slot; 1x Mini PCI Express socket.

Suitable cases & power supplies: The JNC9MGL-525-LF has a standard sized heatsink and can be powered by 20pin and 24pin ATX power connectors. Compatible with all our picoPSUs and Mini-ITX cases.

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

Serial Ports: The JNC9MGL has 1x Serial Port on the back panel and pin headers for an additional 5x Serial Ports.

Box contents: Motherboard, Manual, Driver CD, I/O shield, 1x SATA data cable, 2x Serial port to pin header cables on removable PCI Backplates.

Operating/Storage: 0~40 centigrade operating temperature. -20~85 centigrade storage temperature.

Cooling: This board is provided with a 40mm fan on the heatsink.

Memory Notes: The JNC9MGL-525 uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNF94-270 Long Life Fanless Atom Mini-ITX Board

Jetway JNF94-270 Long Life Fanless Atom Mini-ITX Board
£99.00 
  £118.80 inc. VAT
  IN STOCK (Checked 09:03 BST)

More images of the Jetway JNF94-270

You may also require:

1GB DDR2 667 SODIMM for JNF94-270
£17.50 
  £21.00 inc. VAT
Lead time approx 1-3 days

2GB DDR2 667 SODIMM for JNF94-270
£30.00 
  £36.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

 

Jetway JNF94-270 Fanless Atom motherboard. Fanless 1.6GHz Intel Atom N270 processor and integrated Intel GMA 950 Video. Intel 945GSE + ICH7M Chipset. Up to 2GB of DDR2 system memory on one SODIMM. Realtek RTL8111C Gigabit Ethernet and High Definition Realtek ALC662 Audio.

Long Life: Product availability forecasted at least to End 2014, provisionally to End 2015.

Power Consumption: Approximately 14W idle, 22W maximum power consumption.

Rear Panel Connectors: PS2 keyboard, VGA, DVI-D, Gigabit Ethernet, 4x USB 2.0 Ports, 2x Serial COM Ports (12V/5V selectable), Parallel Port, Line in, Line out & Mic in connectors.

Board Connectors: 1x 20-pin ATX power connector, 1x DDR2 SODIMM Socket, 1x 32-bit PCI, 2x SATA, 1x 40pin IDE, 1x RS232 COM port (COM3, 12V/5V selectable), 1x RS232/RS485/RS422 COM port (COM4, 12V/5V selectable), 1x 8bit GPIO, 1x 18bit dual channel LVDS, 2x Front Panel USB Header (for 4x USB 2.0 ports), 1x HDTV output, 2x DC Fan Headers, 1x CPU Smart Fan Header, Front Panel Header.

Case compatibility. Suitable cases: Most Mini-ITX cases including Jou Jye 528i, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, M200/M300/M350 (with any picoPSU), C1-RACK, Travla C146,147,159 (with universal backplate), Thin Client, Travla C158 (CD supported), Travla C137 (CD supported), Compact Wall Mount Case (with HDD). Other cases supporting standard height heatsinks.

Operating temperature: Operates within 0~60 centigrade (Storage within -20~+85 centigrade).

Box contents: Motherboard, 2x SATA cables, Product Manual, 3 way IDE cable, I/O Shield, Driver and Software CD, HDTV pin header cable.

Note: The JNC94 supports up to 2GB DDR2 memory on a DDR2 SODIMM. This is not compatible with DDR or standard DIMM memory. Fully tested DDR2 SODIMMs are available here.

Jetway JNC96-525 Fanless Dual Core Atom Mini-ITX Board with 12V DC Input

Jetway JNC96-525 Dual Core Atom Mini-ITX Board
£99.00 
  £118.80 inc. VAT
  IN STOCK (Checked 09:03 BST)


More images of the Jetway JNC96-525

You may also require:

1GB DDR2 800 DIMM for JNC96-525
£23.50 
  £28.20 inc. VAT
Lead time approx 1-3 days

2GB DDR2 800 DIMM for JNC96-525
£30.00 
  £36.00 inc. VAT
Lead time approx 1-2 days

8GB 44pin IDE Flash Module for JNC96-525
£99.00 
  £118.80 inc. VAT
  IN STOCK (Checked 09:03 BST)

60W AC Adapter for JNF92-270 (UK plug)
£19.00 
  £22.80 inc. VAT
Lead time approx 3-4 weeks

80W AC Adapter for JNF92-270 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

More 12V AC Adapters

 

Jetway JNC96-525 Atom motherboard with 12V DC Input. Integrated Fanless 45nm 1.83GHz Intel Atom D525 processor with integrated Intel GMA 3150 Video. Intel NM10 Express Platform Controller Host (PCH) Chipset. Up to 4GB of DDR2 system memory; Realtek 8111DL 1000Base-T Gigabit Ethernet and High Definition Audio. Realtek ALC662 audio subsystem.

Reaching End of Life: We hold the last remaining stock of this popular board.

Rear Panel Connectors: PS2 mouse and keyboard, VGA, 4 x USB ports, 1000 Base-T Ethernet, RS-232, 12 Volts DC in, Parallel Port, Line in, Line out & Mic in connectors.

Board Connectors: 4x SATA, 1x 44pin IDE, 1x Mini-PCI Express, 1x PCI, 1x RS232/RS485/RS422, 2x Chassis Fan Headers, Front Panel Header, 3x Front Panel USB Header, Front Panel Audio header. 2x DDR2 DIMM Socket, 1x LVDS header, 1x Inverter header, 1x GPIO.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The Jetway JNC96-525 requires a 12V AC Adapter to power the board directly and feeds power to up to 2 other SATA devices through an on-board male Molex connector. We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 2x HDDs or Slimline Optical Drives*, but we *do not* recommend powering a full size optical drive.

Powering devices: A cable with female Molex to 2x SATA power connectors is provided, suitable for powering up to 2x SATA 2.5in or 3.5in HDD/SSD. Other devices (including PATA/SATA slimline optical drives and CF cards) will require additional cables. Please use the cables linked on the left, or email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are fully compatible with the JNC96-525: M350 (highly recommended), Nexus Psile.

Partially compatible cases (without PSU): M200, M300, M200-LCD, M300-LCD include 40pin IDE CF Adapters which cannot be used without an appropriate cable, as this board has a 44pin IDE port.

Suitable cases (with PSU): The following enclosures have a PSU which can be bypassed and are compatible with the JNC96-525: , Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05 and Jou Jue NU-528i, NAS Chassis (up to 2 drives)

Unsuitable/untested cases: Some cases are currently untested though they are likely to work if the PSU is bypassed, including Travla C158, Thin Client, Compact Wall Mount and all Cubid cases.

Box contents: Motherboard, 2x SATA cables, Product Manual, Molex to 2x SATA power cable, 44pin to 44pin IDE cable, I/O Shield, Driver and Software DVD. 12V AC Adapter not included - these can be found here.

Note: The JNC96 supports 4GB DDR2 memory up to 2GB per DIMM. This is not compatible with DDR memory. Fully tested DDR2 DIMMs are available here.

Jetway JNF9C-2600 Long Life Fanless 1.6GHz Atom Thin-ITX Board with 12V DC Input and CFAST

Jetway JNF9C-2600 Fanless 1.6GHz Atom Thin-ITX Board with 12V DC Input
£109.00 
  £130.80 inc. VAT
  IN STOCK (Checked 09:03 BST)


More images of the Jetway JNF9C-2600

You may also require:

2GB DDR3 1333 SODIMM for JNF9C-2600 (1 stick supported)
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

60W AC Adapter for JNF9C-2600 (UK plug)
£19.00 
  £22.80 inc. VAT
Lead time approx 3-4 weeks

80W AC Adapter for JNF9C-2600 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

More 12V AC Adapters

 

Long-life board with 5 year availability and ultra-low profile form factor (20mm high). Fanless 1.6GHz Intel Atom N2600 processor and integrated PowerVR SGX 545 (GMA 3600@400MHz) Graphics. Intel NM10 Chipset. Up to 2GB of DDR3 system memory on one SODIMM. Realtek RTL8111EVL Gigabit Ethernet and High Definition Realtek ALC662 Audio. CFast Embedded Storage Socket onboard.

Long Life: Product availability forecasted at least to End 2015.

Rear Panel Connectors: 12V DC Input, HDMI, RS232 Serial, 3x USB 2.0 Ports, Gigabit Ethernet, 1x 3.5mm Audio.

Board Connectors: CFast Embedded Storage Socket; 4pin Power out (cable provided); 1x DDR3 SODIMM Socket; 1x 32-bit PCI; 1x Mini PCI-Express; 2x SATA 3Gb/s; 1x SAATA 6Gb/s; 2x RS232 Serial header. 1x RS232/422/485 Serial header; 4x USB 2.0 headers on 2x 9pin connectors; 1x Parallel; 1x GPIO; 1x 32pin 24bit dual channel LVDS1 header/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200); 1x 32pin 18bit single channel LVDS2 header/inverter (PowerVR SGX 545 chipset); 1x VGA header; 3x Fan Headers; Front Panel Header; 9-pin Audio; Keyboard/Mouse header.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The JNF9C-2600 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 3 other SATA devices through an on-board 4pin power output connector. We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.

Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are compatible with the JNF9C-2600: M350 (highly recommended), M200, M300, M200-LCD, M300-LCD. Please note M200/M300 CF adapters are IDE and will not function. The JNF9C-2600 of course has on-board CFast.

Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9C-2600 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).

Box contents: Motherboard, SATA cables, Product Manual, I/O Shield, Driver and Software CD, Serial Cable.

Note: The JNF9C-2600 supports up to 2GB DDR3 memory on a DDR3 SODIMM. This is not compatible with DDR or standard DIMM memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNF9C-2800 Long Life Fanless 1.86GHz Atom Thin-ITX Board with 12V DC Input, 4GB Support and CFAST

Jetway JNF9C-2800 Fanless 1.86GHz Atom Thin-ITX Board with 12V DC Input
£129.00 
  £154.80 inc. VAT
  IN STOCK (Checked 09:03 BST)


More images of the Jetway JNF9C-2800

You may also require:

2GB DDR3 1333 SODIMM for JNF9C-2800 (2 sticks supported)
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

60W AC Adapter for JNF9C-2800 (UK plug)
£19.00 
  £22.80 inc. VAT
Lead time approx 3-4 weeks

80W AC Adapter for JNF9C-2800 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

More 12V AC Adapters

 

Long-life board with 5 year availability and ultra-low profile form factor (20mm high). Fanless 1.86GHz Intel Atom N2800 processor and integrated PowerVR SGX 545 (GMA 3650@640MHz) Graphics. Intel NM10 Chipset. Up to 4GB of DDR3 system memory on 2x 2GB SODIMMs. Realtek RTL8111EVL Gigabit Ethernet and High Definition Realtek ALC662 Audio. CFast Embedded Storage Socket onboard.

Long Life: Product availability forecasted at least to End 2015.

Rear Panel Connectors: 12V DC Input, HDMI, RS232 Serial, 3x USB 2.0 Ports, Gigabit Ethernet, 1x 3.5mm Audio.

Board Connectors: CFast Embedded Storage Socket; 4pin Power out (cable provided); 1x DDR3 SODIMM Socket; 1x 32-bit PCI; 1x Mini PCI-Express; 2x SATA 3Gb/s; 1x SAATA 6Gb/s; 2x RS232 Serial header. 1x RS232/422/485 Serial header; 4x USB 2.0 headers on 2x 9pin connectors; 1x Parallel; 1x GPIO; 1x 32pin 24bit dual channel LVDS1 header/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200); 1x 32pin 18bit single channel LVDS2 header/inverter (PowerVR SGX 545 chipset); 1x VGA header; 3x Fan Headers; Front Panel Header; 9-pin Audio; Keyboard/Mouse header.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The JNF9C-2800 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 3 other SATA devices through an on-board 4pin power output connector. We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.

Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are compatible with the JNF9C-2800: M350 (highly recommended), M200, M300, M200-LCD, M300-LCD. Please note M200/M300 CF adapters are IDE and will not function. The JNF9C-2800 of course has on-board CFast.

Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9C-2800 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).

Box contents: Motherboard, SATA cables, Product Manual, I/O Shield, Driver and Software CD, Serial Cable.

Note: The JNF9C-2800 supports up to 4GB DDR3 memory on 2x 2GB DDR3 SODIMMs (our pictures are of the JNC9C-2600, which has 1 slot). DDR3 is not compatible with DDR or standard DIMM memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNC98-525 Fanless Dual Core 1.8GHz Atom ION2 Board with 12V DC Input

Jetway JNC98-525 Fanless Dual Core 1.8GHz Atom ION2 Board with 12V DC Input
Long Lead Time

More images of the JNC98-525

You may also require:

1GB DDR2 800 DIMM for JNC98-525
£23.50 
  £28.20 inc. VAT
Lead time approx 1-3 days

2GB DDR2 800 DIMM for JNC98-525
£30.00 
  £36.00 inc. VAT
Lead time approx 1-2 days

60W AC Adapter for JNF92-270 (UK plug)
£19.00 
  £22.80 inc. VAT
Lead time approx 3-4 weeks

80W AC Adapter for JNF92-270 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

More 12V AC Adapters

 

Jetway JNC98-525 Fanless ION2 Mini-ITX Motherboard with 12V DC Input. Dual Core 1.8GHz Intel Atom D525 processor, Intel NM10 chipset and low power consumption NVidia ION2 graphics processor featuring PureVideo™ HD Blu-Ray/HD DVD acceleration, CUDA™, PhysX™ and nView™ multiple display support for up to 2 monitors.

AC Adapters: A 12V AC Adapter is required and is *not* included - these can be found in 60W, 80W and 110W sizes here. This board cannot be powered directly from a 12V battery.

Integrated 6 Channel ALC882 High Definition Audio CODEC; Realtek 8111DL Gigabit LAN; VGA, DVI & HDMI graphics outputs (dual Display possible); 4x SATA 3Gb/s; 7x USB 2.0 (inc 3 internal); Mini-PCI Express slot; Fully Vista and Windows 7 Compatible; Approx 25W power consumption.

Rear Panel Connectors: PS2 Keyboard, PS2 Mouse, HDMI, DVI, VGA, 4x USB .0, Gigabit LAN, 3x 3.5mm Audio, 12V DC Power In.

Board Connectors: 2x DDR2 DIMM Sockets, 1x Mini-PCI Express, 4x SATA 3 Gb/s, 3x DC Fan Headers, Front Panel Header, 2x USB (for 3x USB 2.0 ports), 1x CD In, 1x GPIO, 1x Audio, 1x CIT, 1x Serial.

Powering devices: A cable with Female Molex to 1x Floppy and 2x SATA power connectors is provided, suitable for powering up to 2x 2.5in/3.5in SATA HDD/SSD and 1x Slimline Optical Drive (through an adapter). Other devices will require additional cables.

Included Accessories and Cables: SATA Power Cable (see description above), Serial Cable, 2x SATA CAbles, Rear I/O shield, CD, Manual.

Suitable cases (without PSU): The following enclosures come without an internal PSU and are fully compatible with the JNC98-525: M350 (highly recommended), Nexus Psile.

Partially compatible cases (without PSU): M200, M300, M200-LCD, M300-LCD include IDE CF Adapters which cannot be used - these boards only have SATA ports.

Suitable cases (with PSU): The following enclosures have a PSU which can be bypassed and are compatible with the JNC98-525: , Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05 and Jou Jue NU-528i, NAS Chassis (up to 4 drives, with additional power cables). Most of our other cases can also be used in a similar way.

Cooling: This board has no fan and will get quite warm under load. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and strongly suggest adding a fan if using a fanless case with this board (such as the M350 or Thin Client cases).

Memory Compatibility: The JNC98-525 supports up to 4GB maximum memory across 2x DDR2 DIMMs running at 667/800MHz. Fully tested DDR2 DIMMs are linked on the left side of this page, or here.

Jetway JNC9C-550 Fanless Dual Core Atom Mini-ITX Board with Dual LAN, 4x SATA and Daughterboard Expansion

Jetway JNC9C Dual LAN Fanless Expandable Mini-ITX Board
Long Lead Time


More images of the Jetway JNC9C-550

You may also require:

2GB DDR3 1333 SODIMM for JNC9C-550*
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

3x Gigabit LAN Daughterboard Module
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 09:03 BST)

3x Gigabit LAN Daughterboard Module (Intel 82541PI chipset)
£45.00 
  £54.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

JNC9C Backplate for C1/C2-RACK
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

 

End of Life due to Intel's discontinuation of N550 CPU. Please consider JNC9C-455 or JNC9E-525

Extremely versatile Jetway JNC9C-550-LF Dual Core 1.5GHz 64-bit Intel Atom N550 powered Mini-ITX motherboard with Fanless operation, Jetway Daughterboard Expansion, Intel NM10 Express Chipset, Integrated Intel GMA3150 Graphics and Realtek ALC662 6-Channel Audio Codec. Supports up to 2GB of DDR3 1333MHz SODIMM memory. Ports available include: 2x Realtek 10/100/1000 Base-T Gigabit LAN, 4x SATA 3Gb/s (2 ports have RAID 0/1), 1x 44pin IDE.

Jetway JNC9C Mini-ITX motherboards have a unique expansion module slot to add additional ports and functionality - up to 3x Gigabit LAN, 4x Serial Ports and more are all available.

Expandable with a Jetway Daughterboard Module

JNC9C/JNC9E range differences: The JNC9C-455, JNC9C-550 and JNC9E-525 range are mechanically identical but with different CPUs. The low power consumption N455 CPU in the JNC9C-455 runs at about 60% of the speed of the N550 in the JNC9C-550. The N550 runs at 80% of the speed of the D525 in the JNC9E-525. The JNC9E-525 can additionally support 4GB RAM.

Rear Panel Connectors: 1x Combined PS/2 Keyboard or Mouse; 2x 10/100/1000 Realtek 8111E Gigabit LAN; 1x VGA Port; 1x Serial COM Port; 3x 3.5mm Audio (Line-in; Mic-In; Stereo-Out); 4x USB 2.0 Ports.

Board connectors: 1x 24pin ATX Connector (works with 20pin or 24pin); 2x DDR3 SODIMM slots (2GB max on the board); 4x SATA ports up to 3GB/s (2x Intel NM10 integrated SATA controller, 2x JMB363 SATA Controller with RAID 0,1 support); 1x 44pin IDE Connector; 2x 9pin USB Connectors for 4x USB 2.0 Ports; 1x RS232/RS422/RS485 COM (Serial) Header; 1x Parallel Header; 1x 18bit LVDS; 1x GPIO; 1x Front-Panel Connector; 1x CPU Smart Fan; 1x DC Fan Connector.

Expansion: 1x 32-bit PCI slot; 1x Mini-PCI Express Slot; 1x 120pin Jetway Embedded PCI Daughterboard Expansion Slot.

Graphics: Integrated Intel GMA3150 Graphic Engine with Core Frequency of 400MHz. DirectX 9.0c and OpenGL 1.4 compliant Hardware Pixel Shader 2.0. Supports VGA output resolution up to 2048 x 1536.

*Memory Configurations: The Jetway JNC9C board supports 2GB maximum across both slots: valid JNC9C DDR3 SODIMM configurations are 1GB + 0GB, 1GB + 1GB and 2GB + 0GB.

Suitable cases & power supplies: The JNC9C has a standard sized heatsink and can be powered by 20pin and 24pin ATX power connectors. Compatible with all our picoPSUs and Mini-ITX cases.

Box contents: Motherboard, I/O shield, SATA data cable, Serial port to pin header cable, 44pin to 44pin IDE cable.

Operating/Storage: 0~60 centigrade operating temperature. -20~85 centigrade storage temperature.

Cooling: This board has no fan and will get quite warm under load. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and strongly suggest adding a fan if using a fanless case with this board (such as the M350 or Thin Client cases).

Memory Note: The JNC9C uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNF99-525 Long Life Fanless Dual Core Atom Mini-ITX Board with Dual LAN, 6x SATA and Daughterboard Expansion

Jetway JNF99 Dual LAN Fanless Expandable Mini-ITX Board
£139.00 
  £166.80 inc. VAT
  IN STOCK (Checked 09:03 BST)


More images of the Jetway JNF99-525

You may also require:

2GB DDR3 1333 SODIMM for JNF99-525
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

3x Gigabit LAN Daughterboard Module
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 09:03 BST)

3x Gigabit LAN Daughterboard Module (Intel 82541PI chipset)
£45.00 
  £54.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

JNF99 Backplate for C1/C2-RACK
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 09:03 BST)

 

Extremely versatile Jetway JNF99-525-LF Dual Core 1.8GHz 64-bit Intel Atom D525 powered Mini-ITX motherboard with Fanless operation, Jetway Daughterboard Expansion, Intel ICH9R Chipset, Integrated Graphics and VIA VT1705 6-Channel Audio Codec. Supports up to 4GB of DDR3 1066/1333MHz SODIMM memory. Ports available include: 2x Intel 82574L 10/100/1000 Base-T Gigabit LAN, 6x SATA 3Gb/s (supporting RAID 0, 1, 5, 10 & JBOD), USB 3.0, PCI and Mini-PCI Express.

Long Life: Product availability forecasted at least to End 2014, provisionally to End 2015.

Jetway JNF99 Mini-ITX motherboards have a unique expansion module slot to add additional ports and functionality - up to 3x Gigabit LAN, 4x Serial Ports and more are all available.

Expandable with a Jetway Daughterboard Module

Rear Panel Connectors: 1x Combined PS/2 Keyboard or Mouse; 2x USB 3.0; 1x VGA Port; 1x Serial COM Port; 2x 10/100/1000 Intel 82574L Gigabit LAN; 3x USB 2.0 Ports; 3x 3.5mm Audio (Line-in; Mic-In; Stereo-Out).

Board connectors: 1x 24pin ATX Connector (works with 20pin or 24pin); 2x DDR3 SODIMM slots (2x 2GB max); 6x SATA 3Gb/s ports (with RAID 0, 1, 5, 10 & JBOD support); 3x 9pin USB Connectors for 6x additional USB 2.0 Ports; 1x RS422/RS485 COM (Serial) Header; 1x Parallel Header; 1x 32bit LVDS; 1x GPIO; 1x Audio; 1x Front-Panel Connector; 1x CPU Smart Fan; 1x DC Fan Connector.

Expansion: 1x 32-bit PCI slot; 1x Mini-PCI Express Slot; 1x 120pin Jetway Embedded PCI Daughterboard Expansion Slot.

Suitable cases & power supplies: The JNF99 has a standard sized heatsink and can be powered by 20pin and 24pin ATX power connectors. Compatible with all our picoPSUs and Mini-ITX cases.

Box contents: Motherboard, Manual, Driver CD, I/O shield, 6x SATA data cables, Serial port to pin header cable.

Operating/Storage: 0~60 centigrade operating temperature. -20~85 centigrade storage temperature.

Cooling: This board has no fan and will get quite warm under load. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and strongly suggest adding a fan if using a fanless case with this board (such as the M350 or Thin Client cases).

Memory Note: The JNF99 uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here.

Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.


Reckoner

Cards accepted:
Additionally with PayPal:
Secure Shopping:

Contact Us

Store: +44 (0) 845 475 8 475

Store enquiries: store@mini-itx.com

Other enquiries: feedback@mini-itx.com

Visit the Store

Click here to enter the online store

Social

Follow us on Twitter!

Join our Mailing List

Copyright: All content on this site is Copyright © 2002-2013 Mini-ITX.com and respective owners, all rights reserved.