What's Hot on Makezine.com:
Bikes, rockets, R/C vehicles, toys, and lots more delightful diversions.
This quirky homemade Street Fighter II Rotating Lamp was created by The Homemade Game Guru...
This easy build uses two important scientific principles, buoyancy and stored kinetic energy, to float and drive...
Software developer Phil Tucker of Toronto went all out for his wedding, creating some awesome...
Twig stoves are handy and eco-friendly — you don't haul fossil fuel, you just collect...
Introduction How would you or anyone you know like to generate their own electricity? How...
Laurens Valk built this quick and dirty "most useless machine" with a Lego Mindstorms EV3...
According to NASA, there's a good chance we are in the midst of a significant...
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 14 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 14 of Maker Hangar, Lucas Weakley shows us how to fly the Maker Trainer! We learn how to throw the plane, how to practice flying in a straight line, how to turn, and many more things. Just remember to hope for the best and expect the worse. Hopefully, you didn't spend to much time on your first build so that if you do crash then you're only out a couple dollars in foam.
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 13 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 13 of Maker Hangar, Lucas Weakley teaches us about the importance of R/C flight simulators. We also learn about the different types of flight simulators and which ones are the best. Lucas also shows us what to do when we get our flight simulators, so that we're ready to do our first flights.
Related Links: Absolute RC Sim (iTunes) Absolute RC Sim (Google) RC-AirSim LT HK Flight Sim Phoenix RC
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
LeanKit is your stereotypical software startup company in regards to growing rapidly and packing too many...
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 12 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 12 of Maker Hangar, Lucas Weakley shows us how to set up the radio for the plane. We learn how to zero out the control surfaces, how to check for the correct directions of all the controls, and how to program in the travel and dual rates for all the movements. So grab your radio, and lets get programming!
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Attention Northern California gearheads: This Sunday, Aug. 18, the Sonoma County Bicycle Coalition will host...
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 11 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 11 of Maker Hangar (the third episode in building the Maker Trainer) Lucas Weakley shows us how to install all the servos, the motor, the receiver, and rout all the wires in the Maker Trainer. These next steps require a bit of patience and precision so take your time and everything will come out just fine.
Additional Materials: • Popsicle sticks • Small piece of plywood (about 2.5"x2.5") • Coffee straw or small tube • 0.047"/1.19mm music wire
Download the STL file for control horns if you'd like to 3D-print them.
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
When it comes to pastries that look like elements of Super Mario Bros games you'll...
BroLUG, a group of over a dozen Lego builders, collaborated to build this fantastic cyberpunk...
You've seen them on Reddit, Facebook, 4chan, and all over the web: those funny image...
Yesterday I unboxed the new Lego Mindstorms EV3 set, and even before powering on the...
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 10 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 10 of Maker Hangar, the second episode of the build series for the Maker Trainer, Lucas Weakley shows us how to build the plane and get it ready for electronics to be installed. We learn how to fold and glue together the fuselage, how to build the tail, how to assemble the wing, and Lucas demonstrates how the plane folds together when not flying. So grab your hot glue gun and a bag of glue sticks and lets get making!
Parts list: 3/8"x3/8"x36" wooden rod (2) 1/2"x1/2"x36" wooden rod (1) Heavy duty packing tape Hot glue gun
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Manchester (England's)Mini Maker Faire is set for this weekend, Aug. 10-11. More than 50 makers are...
This quirky homemade Street Fighter II Rotating Lamp was created by The Homemade Game Guru...
Maker Hangar is a 15-part video series by Lucas Weakley. Episode 9 of Maker Hangar...
Maker Hangar is a 15-part video series by Lucas Weakley.
Episode 9 of Maker Hangar is the first episode of the build series for the Maker Trainer. In this episode, Lucas Weakley shows us how to lay out out the plans, cut out the foam, and cover the foam with colored packing tape. So grab your X-Acto knife and lets get making!
Referenced in the video are: Downloadable PDF plans for the Maker Trainer Packing tape source ExperimentalAirlines detailed video tutorial on covering foam with tape
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
This quirky homemade Street Fighter II Rotating Lamp was created by The Homemade Game Guru...
This Lego Mindstorms EV3 unboxing video by EV3 developer Laurens Valk shows you what you...
Perfect for party decor, photo booths, and video backdrops, this hanging yarn banner tutorial from...
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 8 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 8 of Maker Hangar, Lucas Weakley shows us all the parts he chose to go on the Maker Trainer! We also learn how to solder the different R/C connectors onto the ESC. Lucas also goes over how to connect all the wires together and bind your radio so you can control everything.
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
The 1950s were a golden age for the curious kid builder of all things balsa,...
Today on Maker Camp (11am PDT on Google+) we'll be talking about the intersection of...
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 7 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 7 of Maker Hangar, Lucas Weakley teaches us about R/C receivers. These take the signals from transmitters and allow you to control your plane. We learn how the channels on the receiver correspond to the sticks and switches on the transmitters. Also Lucas goes over how to power receivers, and how and where to place them on your plane.
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
This is a great interview that Joseph Mullins of JoJaqs.com did with PPPRS honcho (and...
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 6 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 6 of Maker Hangar, Lucas Weakley shows us the radios for R/C planes. We learn what all the sticks, switches, and knobs do as well as what they can be used for. We also see a glimpse into the past with old radio technology and how today's is much better. Lucas also shows us how to do some basic programming with our radios, and we see all the cool things we can do with R/C transmitters.
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 5 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 5 of Maker Hangar, Lucas Weakley teaches us about servos, these are the little motors that move the control surfaces on RC planes. We learn about the different parts of a servo, and what each of them do. We see how to classify servos by their sizes, weights, and strength. Lucas also goes over the different types of linkages and the techniques on hooking up control surfaces.
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Materials: LEGO Education kit 9686, or equivalent subset of parts Printable building instructions and parts...
Toys are meant to be fun. Some are educational. How do you create toys that...
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 14 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 14 of Maker Hangar, Lucas Weakley shows us how to fly the Maker Trainer! We learn how to throw the plane, how to practice flying in a straight line, how to turn, and many more things. Just remember to hope for the best and expect the worse. Hopefully, you didn't spend to much time on your first build so that if you do crash then you're only out a couple dollars in foam.
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 13 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 13 of Maker Hangar, Lucas Weakley teaches us about the importance of R/C flight simulators. We also learn about the different types of flight simulators and which ones are the best. Lucas also shows us what to do when we get our flight simulators, so that we're ready to do our first flights.
Related Links: Absolute RC Sim (iTunes) Absolute RC Sim (Google) RC-AirSim LT HK Flight Sim Phoenix RC
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 12 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 12 of Maker Hangar, Lucas Weakley shows us how to set up the radio for the plane. We learn how to zero out the control surfaces, how to check for the correct directions of all the controls, and how to program in the travel and dual rates for all the movements. So grab your radio, and lets get programming!
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 11 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 11 of Maker Hangar (the third episode in building the Maker Trainer) Lucas Weakley shows us how to install all the servos, the motor, the receiver, and rout all the wires in the Maker Trainer. These next steps require a bit of patience and precision so take your time and everything will come out just fine.
Additional Materials: • Popsicle sticks • Small piece of plywood (about 2.5"x2.5") • Coffee straw or small tube • 0.047"/1.19mm music wire
Download the STL file for control horns if you'd like to 3D-print them.
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 10 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 10 of Maker Hangar, the second episode of the build series for the Maker Trainer, Lucas Weakley shows us how to build the plane and get it ready for electronics to be installed. We learn how to fold and glue together the fuselage, how to build the tail, how to assemble the wing, and Lucas demonstrates how the plane folds together when not flying. So grab your hot glue gun and a bag of glue sticks and lets get making!
Parts list: 3/8"x3/8"x36" wooden rod (2) 1/2"x1/2"x36" wooden rod (1) Heavy duty packing tape Hot glue gun
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Maker Hangar is a 15-part video series by Lucas Weakley. Episode 9 of Maker Hangar...
Maker Hangar is a 15-part video series by Lucas Weakley.
Episode 9 of Maker Hangar is the first episode of the build series for the Maker Trainer. In this episode, Lucas Weakley shows us how to lay out out the plans, cut out the foam, and cover the foam with colored packing tape. So grab your X-Acto knife and lets get making!
Referenced in the video are: Downloadable PDF plans for the Maker Trainer Packing tape source ExperimentalAirlines detailed video tutorial on covering foam with tape
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 8 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 8 of Maker Hangar, Lucas Weakley shows us all the parts he chose to go on the Maker Trainer! We also learn how to solder the different R/C connectors onto the ESC. Lucas also goes over how to connect all the wires together and bind your radio so you can control everything.
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
Maker Hangar is a 15-part video series by Lucas Weakley. In Episode 7 of Maker...
Maker Hangar is a 15-part video series by Lucas Weakley.
In Episode 7 of Maker Hangar, Lucas Weakley teaches us about R/C receivers. These take the signals from transmitters and allow you to control your plane. We learn how the channels on the receiver correspond to the sticks and switches on the transmitters. Also Lucas goes over how to power receivers, and how and where to place them on your plane.
MAKE and Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.
New installments will air every Tuesday and Thursday through August. Also, be sure to join us on the Maker Hangar Google+ Community page to share your ideas, comments, photos and video and details for your own RC plane project builds.
Lucas Weakley is a 17-year-old Eagle Scout who will be a senior next year in the Engineering and Manufacturing Institute for Technology (EMIT) at Forest High School in Ocala, Fla. Lucas became interested in flight and got his first RC plane for his ninth birthday. Recently he’s been designing and building his own planes and hosts an R/C aircraft YouTube show called BusyBee TV. Lucas also has his own aerial videography company called TopView Aerials.
For more information about the series, as well as archived videos, head to the Maker Hangar page.
The 1950s were a golden age for the curious kid builder of all things balsa,...
Materials: LEGO Education kit 9686, or equivalent subset of parts Printable building instructions and parts...
This easy build uses two important scientific principles, buoyancy and stored kinetic energy, to float and drive...
Operation is a game that lets you test your hand-eye coordination by removing a variety...
Whether it’s a cathode ray tube, liquid crystal display, Nipkow disk, organic light-emitting diode, or...
Laurens Valk built this quick and dirty "most useless machine" with a Lego Mindstorms EV3...
According to NASA, there's a good chance we are in the midst of a significant...
LeanKit is your stereotypical software startup company in regards to growing rapidly and packing too many...
Attention Northern California gearheads: This Sunday, Aug. 18, the Sonoma County Bicycle Coalition will host...
BroLUG, a group of over a dozen Lego builders, collaborated to build this fantastic cyberpunk...
You've seen them on Reddit, Facebook, 4chan, and all over the web: those funny image...
Yesterday I unboxed the new Lego Mindstorms EV3 set, and even before powering on the...
Manchester (England's)Mini Maker Faire is set for this weekend, Aug. 10-11. More than 50 makers are...