Niobium: the essentials

The name niobium was adopted officially by IUPAC in 1950, but a few commercial producers still like to refer to it as columbium. Niobium is a shiny, white, soft, and ductile metal, and takes on a bluish tinge when exposed to air at room temperatures for a long time. The metal starts to oxidize in air at high temperatures, and when handled hot must be done so under a protective atmosphere so as to minimize oxide production.

Table: basic information about and classifications of niobium.

niobium wire
Small and large samples of niobium wire like this, as well as foil, sheet, insulated wire and tube, can be purchased from Advent Research Materials via their web catalogue.

Niobium: historical information

Niobium was discovered by Charles Hatchett at 1801 in England. Origin of name: from the Greek word "Niobe" meaning "daughter of Tantalus" (tantalum is closely related to niobium in the periodic table).

Niobium was discovered in 1801 by Charles Hatchett in an ore called columbite sent to England in the 1750s by John Winthrop the Younger, the first goveror of Connecticut, USA. Hatchett called the new element columbium. He was not able to isolate the free element. There was then considerable confusion concerning the distinction between niobium and tantalum as they are so closely related. This confustion was resolved by Heinrich Rose, who named niobium, and Marignac in 1846. The name niobium is now used in place of the original name "columbium".

The metal niobium was first prepared in 1864 by Blomstrand, who reduced the chloride by heating it in a hydrogen atmosphere.

Niobium: physical properties

 Read more » »

Niobium: orbital properties

 Read more » »


Isolation: isolation of niobium appears to be complicated. Niobium minerals usually contain both niobium and tantalum. Since they are so similar chemically, it is difficult to separate them. Niobium can be extracted from the ores by first fusing the ore with alkali, and then extracting the resultant mixture into hydrofluoric acid, HF. Current methodology involves the separation of tantalum from these acid solutions using a liquid-liquid extraction technique. In this process tantalum salts are extracted into the ketone MIBK (methyl isobutyl ketone, 4-methyl pentan-2-one). The niobium remains in the HF solution. Acidification of the HF solution followed by further extraction in MIBK gives an organic solution containing niobium.

After conversion to the oxide, metallic niobium can be made by reduction with sodium or carbon. Electrolysis of molten fluorides is also used.

WebElements Shop

WebElements now has a WebElements shop at which you can buy periodic table posters, mugs, T-shirts, games, fridge magnets, molecular models, and more.

Periodic Table fridge magnets Periodic Table fridge magnets
Buy our periodic table fridge magnets here

WebElements poster Periodic table t-shirts Periodic table mouse mats Molymod molecular model kits Chemistry educational resources

niobium atomic number