Hi, I’m Calli
Welcome! If you enjoy your visit, be sure to follow me:
Canning Day Quilt
Oh My Stars!

Make it: A Snowman Kit

Last year we received a snowman kit from one of my dear friends as a Christmas gift.  A few days after the gift arrived, we had an epic storm and the kids spent hours playing in the snow and building their wonderful snowman.

It was such a fun idea, and I was sure I could make a handmade version for gifts this year.

A snowman is simple.  He needs a hat, eyes, nose, mouth, scarf and buttons down his shirt.  If you want an authentic snowman, you can even add a corncob pipe.

Yesterday I got to work and made my own snowman kit.

IMG_7988

I cut a 7 inch width of red polar fleece for a scarf.  Most polar fleece is 60 inches wide which makes a perfect length for a scarf.  Then fray the end by cutting a 3 inch strip every 1/2 inch.  Check it out with a little snowflake:

IMG_8040

I traced a snowflake cookie cutter on white craft felt with pencil and cut it out.  Then I stitched around using a machine blanket stitch.  This scarf is so cute, you could steal it from the snowman and wear for Christmas.

IMG_7993

Ben and I headed over to a stream by our house and gathered small semi round stones.  When we got home, Ben painted them with black acrylic paint to make the snowman’s mouth.

IMG_7994

Boys love rocks.  They love to collect rocks.  They love to paint rocks.  I love rocks because they are the perfect old fashioned look for a snowman… and they are free.

IMG_8036

I splurged on a fake carrot from a local craft store for $3.  My husband thinks I should cut the “hairy” things off it it… too gross.  I pulled out the foliage and hot glued a dowel into the hole in the end, to make it easier to stick it into the snowman.  You could also use a real carrot in the kit… which would obviously need to be replaced as needed.

IMG_8024

Next were inexpensive buttons for the eyes and down his tummy, big black buttons for the eyes, smaller green buttons for the tummy.   I put the rocks and buttons into this cute little box for the gift.

And last but not least, the hat.  I made it out of cheap black felt.  I sprayed the felt with a little heavy starch to make it less floppy, and it turned out darling.  I will be posting a tutorial on making the hat later today (I hope.)  I still have a few measurements to get right if someone besides me is tried make it…  I had to fudge a few times.  I thought that Geometry teacher was lying when he said I would use these skills someday.  Circumferences anyone?  You could also buy a hat from a thrift store, Halloween close-out, cheap Santa hat, there’s lots of inexpensive choices.

UPDATE:  Here are the directions for making a snowman hat:  Start with at least 3/4 yard of cheap black felt.

  1. Cut one circle 12″ inches wide for the brim of the hat.
  2. Cut a smaller circle 6 3/4″ in the center of the the brim.
  3. Cut one 8″ inch circle for the top of the hat.
  4. Cut one rectangle, 6″ x  24″ for the cylinder.
  5. Folding the rectangle in half, stitch the end using a 1/4″ seam, making the cylinder.
  6. Keeping the cylinder wrong side out, carefully pin the 8″ circle around the top of the hat.  Stitch together.
  7. Turn the cylinder right side out.  I used a chopstick to make the turn neat and tidy.
  8. Pin the brim of the hat carefully around the cylinder.  Stitch together.
  9. Embellish the hat if desired.  Use a piece of red felt or grosgrain ribbon around the hat.  Or throw on a flower or a sprig of holly.  Or just simply leave it a plain black hat… either way it’s going to be a darling snowman.

IMG_8031

Last it all goes into a gift box… add a cute little tag that reads, “Just Add Snow.”  And another check off my gift list!



Share and Enjoy:
  • Digg
  • StumbleUpon
  • del.icio.us
  • Facebook
  • Twitter
  • Google Bookmarks
  • Google Buzz
  • Yahoo! Buzz

73 Responses to “Make it: A Snowman Kit”

Leave a Reply for Sue

Archives


Virtual Quilting Bee