Uneven Belt Surfaces
Problem with Uneven Belt Surfaces?
《Laminate / sheet forming》
Conveyor steel belt (DW type)
Features
- Thin film forming and film coating on both sides of material can be conducted on steel belts.
- Thickness of steel belts is highly uniform
- The welded area is practically the same thickness as the base material by precise butt-welding
- Belt surface can be processed into flat mirrored surface.
- Belts can be heated and cooled
Applications
- Producing film for electronic parts
- Pressure molding resins
- Laminating paper
- Drying, cooling, and uniformly shaping resin and rubber sheets
Material
High tensile stainless steel
Producible range
Can be possible to make products out of the below range.
- Thickness...0.2~1.2mm
- Width......100mm~1500mm
- Length (machine)...1000~5000mm
- Drive Steel Belt
- Conveyor Steel Belt
- Perforated Steel Belt
- Seamless Drive Steel Belt
- Solar Stringer Soldering Machine Belts / Tabber and Stringer Belts
- Oil Skimmer Belt
- Steel Belt Continious Inspection Conveyor
- Food Steel Belt Conveyor
- Vacuum Conveyor Belt / Air suction Belt
- Double Belt Press Heating System
- Ultra Thin Metal Sleeves and Tubes
- OA Roller in Printers and Copiers
- Flexible Air Roller and Flexible Mirror Roller
- Belt Elongation and Vibration
- Backlash
- Contamination / Uncleanability / Residual Odor
- Positioning Accuracy
- Particle generation / Contamination
- Conveying in high temperature
- Static Electricity
- Conveying metal products with burrs and edges
- Belt thickness and uneven surfaces
- Uneven Belt Surfaces
- Gas generation in vacuum devices and others