Jerry Brown Line One Spectra Avet,Everol,Tsunami,Avet EXW50 QUAD,MX,AVET Reels

The Wayback Machine - https://web.archive.org/all/20050204001111/http://cabbagekeyrodandreel.com:80/JerryBrownLineOneSpectra.html

AVET REELS,AVET 2 SPEED REELS,AVET FISHING REELS,AVET,TSUNAMI FISHING RODS,EVEROL REELS TSUNAMI RODS TSUNAMI FISHING RODS SHIMANO TORIUM REELS,,AVET EXW,DAIWA SALTIGA REELS,DAIWA,SALTIGA 30,EVEROL WATERPROOF REELS,DAIWA REELS,AVET,TSUNAMI SURF RODS,SHIMANO,SHIMANO REELS,EVEROL 2 SPEED,AVET 2 SPEED EXW,AVET MX,AVET FISHING REEL,EVEROL,DAIWA SALTIGA 15,DAIWA SURF REELS,SHIMANO FISHING REELS,DAIWA SALTIGA LEFT HAND REELS,EVEROL

Cabbage Key is proud to offer Jerry Brown Line One Spectra. This brand of line is superior to other brands for several reasons. First it is manufactured with finer filaments resulting in a smoother , more pliable line. Secondly, if you fish using a colored spectra, the dyeing process used on this line produces a much longer lasting color, no messy dust or clumps of waxy residue to contend with, not to mention you will spool more line on due to its smaller, consistent diameter

Line One hollow spectra has one more very important advantage, the ability to construct a knotless splice by inserting your mono topshot into the hollow spectra. This results in a chinese handcuff type of connection which is virtually seamless and tests close to 100%. The mono is inserted about 5 feet into the hollow spectra, drawn tight, then chemically bonded using a special 2 part adhesive at the junction of the splice. A length of 30 Lb Spectra should be tied into a series of half hitches spanning both lines at the joint The special 2 part adhesive should be applied to the junction, over the half hitches , chemically bonding the ensemble together.

This system has proven itself to be the ultimate connection for long range style rigging. It offers the ability to wind on a long leader of your choice, with no bulky knots to foul on the rollers or eyelets on the rod. Many anglers have also attached another piece of hollow spectra with a loop on the end. This rig allows you to employ a wind on with a loop to loop connection

Line One Hollow core, available in the heavier weights, lays flat, resists burying, and spools a greater quantity than round line. Considering the obvious advantages and superior quality, Line One surprisingly costs less than the more widely known lines.

What line test braid is appropriate for my reel?

This is best answered by the drag setting you will be using your reel at. 3 times the maximum drag is a good rule of thumb. For instance if you set an Avet EX50 at its maximum setting of 50 pounds drag at strike, the proper line would be 130 to 150 lb test braid. Anything less will be like putting bicycle tires on the back of a souped up Vette. Just too small. You should know the drag settings you will most likely use and go from there. You can always inexpensively change the topshot or wind on leader to suit the local conditions and bite.