|
Hawaii Marine Templates
|
Templates quickly eliminate laborious computational tasks and as bonus give your work a professional appearance.
Some of the Excel© and MathCAD© templates on this site can benefit most anybody,
this includes any professionals like attorneys, contractors, technicians,
skilled labor, researchers, and scientists, not just marine types. It is a
lot easier to use a template than to create and format it. So leverage
your efforts (by incorporating the work of others), give your work a polished
look and save yourself time and money to boot!
Most of the templates
on this site are especially
suited for utilization by
nautical specialists. This includes naval architects, ship design engineers, marine
engineers, ocean engineers, dredge engineers, marine
salvage engineers, maritime regulators, boat and yacht designers.
However, in many cases these
templates can be used by many types of
non-nautical engineers. For example structural engineers, mechanical
engineers, civil engineers, petroleum
engineers, and engineering technicians.
There are also general business
tracking templates that can be easily utilized
by most professionals. Lawyers, paralegals, expert witnesses, scientists,
researchers, contractors, technicians, draft-persons and any others that charge by the
hour, go by cost plus, labor and materials or simply want to track their
expenses as they occur.
|
Template Index
|
|
|
|
|
| Name (click
titles for more info) |
Program
Required |
Cost |
Download |
| Weights
and Moments Sheet - English Units, from weights
and centroids of components it computes total
weight and centroids of
all elements combined. Product ID Number: WM-e. |
MS Excel |
Free |
Download
Now! |
| Weights
and Moments Sheet - Metric Units, from weights
and centroids of components it computes total weight and centroids of
all elements combined. Product ID Number: WM-m. |
MS Excel |
Free |
Download
Now! |
| |
|
|
|
| Section
Modulus for Framing Members - English Units From
component
sectional area properties, this quick and neat template computes the total
sectional area properties of the all the components combined. This
includes total area, area center, section modulus and moment of inertia.
Product No. SMF-e. |
MS Excel |
$12.50 |
|
| Section
Modulus for Framing Members - Metric Units From
component
sectional area properties, this quick and neat template computes the total
sectional area properties of the all the components combined. This
includes total area, area center, section modulus and moment of inertia.
Product No. SMF-m. |
MS Excel |
$12.50 |
|
| |
|
|
|
| Tankage
Summary - English Units From individual
tank properties this convenient spreadsheet calculates the cumulative
effect of all tanks combined. This includes each tank's and the
combined free surface effects. For each tank, the user may select a
value from zero to one hundred percent full. Product
No. Tanks-e. |
MS Excel |
$7.75 |
|
| Tankage
Summary - Metric Units From individual tank
properties this convenient spreadsheet calculates the cumulative effect
of all tanks combined. This includes each tank's and the combined
free surface effects. For each tank, the user may select a value
from zero to one hundred percent full. Product
No. Tanks-m. |
MS Excel |
$7.75 |
|
| |
|
|
|
| Trim
& Stability Sheet - English Units For a
given vessel condition, this spreadsheet computes trim present and
metacentric height. Curves of Form inputs, Light Ship, passenger,
crew, cargo and consumables weight information are required. This
spreadsheet only works accurately if the trim obtained from it is less
than 1% of vessel length. Product # TS-e. |
MS Excel |
$25.00 |
|
| Trim
& Stability Sheet - Metric Units For a
given vessel condition, this spreadsheet computes trim present and
metacentric height. Curves of Form inputs, Light Ship, passenger,
crew, cargo and consumables weight information are required. This
spreadsheet only works accurately if the trim obtained from it is less
than 1% of the vessel length. Product
Number TS-m. |
MS Excel |
$25.00 |
|
| |
|
|
|
|
Displacement Sheet
(Sectional Area Curve) -
English Units For a
given vessel condition, with sectional area inputs this spreadsheet does
numerical integrations using Simpson's Methods. It computes displaced
volume, weight, longitudinal and vertical centers of buoyancy. Product
Number Disp-e. |
MS Excel |
$7.50 |
|
|
Waterplane Sheet (Half Breadth Inputs) -
English Units For a
given vessel condition, with half breadth inputs this spreadsheet does
numerical integrations using Simpson's Methods. It computes
waterplane area, longitudinal center of floatation, longitudinal and
transverse moment of inertias. Product
# WP-e. |
MS Excel |
$7.50 |
|
|
Waterline Input/Output Sheet -
English Units
Input for this sheet are combined data from the
Displacement Sheet, Waterplane Sheet, draft data and maximum cross
sectional area. This sheet outputs
tons per inch, longitudinal & transverse metacentric radii, longitudinal
and transverse metacenter heights from Baseline, block coefficient,
prismatic coefficient and midships coefficient. Product
Number WL-IO-e. |
MS Excel |
Free |
Download
Now! |
|
Waterline Hydrostatics
Sheet - English Units
At a
given waterline condition, this
template computes a vessel's
hydrostatics characteristics. It combines
and streamlines the Displacement Sheet, Waterplane Sheet and the Waterline
Input/Output Sheet. If this sheet is
utilized for three waterlines, "Curves of Form" can be generated from the
combined output. Product
# WL-hydro-e. |
MS Excel |
$15.00 |
|
| |
|
|
|
|
Towline Pull, Static Criterion
(English Units) for Z-Drive Vessels
This template checks a vessel equipped to tow for compliance with
46CFR173.095(b). This template applies
only to vessels that are equipped for towing and have Z-Drives for
propulsion (i.e. Tractor Tugs, Offshore Supply Vessels, Work Boats and
Fish Boats). Product # TowStZ-e. |
MS Excel |
Free |
Download
Now! |
|
Towline Pull, Static Criterion
(Metric Units) for Z-Drive Vessels
This template checks a vessel equipped to tow for compliance with
46 CFR 173.095(b). This template applies
only to vessels that are equipped for towing and have Z-Drives for
propulsion (i.e. Tractor Tugs, Offshore Supply Vessels, Work Boats and
Fish Boats). Product # TowStZ-m. |
MS Excel |
Free |
Download
Now! |
|
Towline Pull, Dynamic
Criterion (English Units) for Z-Drive Vessels
This template checks a vessel equipped to tow for compliance with
46CFR173.095(b). This template applies
only to vessels that are equipped for towing and have Z-Drives for
propulsion (i.e. Tractor Tugs, Offshore Supply Vessels, Work Boats and
Fish Boats). Product # TowDyZ-e. |
MathCAD |
$59.50 |
|
|
Towline Pull, Dynamic Criterion
(Metric Units) for Z-Drive Vessels
This template checks a vessel equipped to tow for compliance with
46 CFR 173.095(c) - (f). This template applies
only to vessels that are equipped for towing and have Z-Drives for
propulsion (i.e. Tractor Tugs, Offshore Supply Vessels, Work Boats and
Fish Boats). Product # TowDyZ-m. |
MathCAD |
$59.50 |
|
|
|
|
|
|
Tow Vessel, Dynamic
Weather Criterion (English Units)
This template checks a vessel equipped to tow for
compliance with 46CFR174.145(a) - (f). This template applies
only to vessels that are equipped for towing (i.e. Tractor Tugs, Offshore Supply Vessels, Work Boats and
Fish Boats). Product # TowWth-e. |
MathCAD |
$39.50 |
|
|
Tow Vessel, Dynamic
Weather Criterion (Metric Units)
This template checks a vessel equipped to tow for
compliance with 46 CFR 174.145 (a) - (f). This template applies
only to vessels that are equipped for towing (i.e. Tractor Tugs, Offshore Supply Vessels, Work Boats and
Fish Boats). Product # TowWth-m. |
MathCAD |
$39.50 |
|
|
|
|
|
|
Project Time Log (Dollar
Currency) This
handy spreadsheet
automatically computes computes elapsed time spent and
labor cost for each session along with cumulative time and labor cost for
a project. Ideal for
keeping track of project labor data. Product Number TL-Dollars. |
MS Excel |
$5.00 |
|
|
Project Time Log (Euro
Currency) This
handy spreadsheet
automatically computes computes elapsed time spent and
labor cost for each session along with cumulative time and labor cost for
a project. Ideal for
keeping track of project labor data. Product Number TL-Dollars. |
MS Excel |
$5.00 |
|
|
Project Time Log (Pounds
Sterling Currency) This
spreadsheet
automatically computes computes elapsed time spent and
labor cost for each session along with cumulative time and labor cost for
a project. Ideal for
keeping track of project labor data. Product Number TL-Dollars. |
MS Excel |
$5.00 |
|
|
|
|
|
The following templates
are
scheduled for release at a later date
 | Curves of Form
Sheets. This involves a summary table that is dynamically tied
into three or more draft evaluation sheets. |
|
Section Modulus Sheet, for amidships or
complex cross section. Single page spreadsheet, Excel template. |
|
Stability Test Booklet - multiple page
spreadsheet, Excel template. |
|
Simplified Stability Test Calculations -
multiple page spreadsheet, Excel template. |
|
Dynamic Stability Criteria, Vessels of
Unusual Form - multiple page MathCAD template. |
|
Plus more ... contact us, at hmt@hawaii-marine.com,
if you have an immediate need, maybe we already have a template for it! |
|
|
