Homebrewing equipment

The Wayback Machine - https://web.archive.org/all/20050205094838/http://www.leeners.com:80/hardware.html






BREWING HARDWARE

There are only two options for the home brewer when it comes to boiling wort. Boil it all or boil as much as you can. Full boil worts will make better beer than partial boils but both are acceptable. When selecting a brew pot remember to consider the head room needed to prevent boil over and the heating capabilities of your stove!

STAINLESS STEEL BREWERING SYSTEM
This is a must for every serious all grain homebrewer and is actual used by our local brewpub as a pilot system. Stainless steel kettle eith perforated stainless steel false bottom and probe thermometer making this a complete mash tun, lauter tun and boiling kettle.
10 gl BREWERING SYSTEM $329.95-
15 gl BREWERING SYSTEM $375.95-

INDIVIDUAL COMPONENTS
10 gl BREW KETTEL-$215.00-
with brass spigot and thermometer mounting.

10 gl FALSE BOTTOM $65.00-
Designed specifically for the all grain homebrewer. Removable for easy cleaning and when used during the boil with whole hops it acts as a hop back.

15 gl BREW KETTEL $245.00-
with brass spigot and thermometer mounting.

15 gl FALSE BOTTOM $89.95-
Designed specifically for the all grain homebrewer. Removable for easy cleaning and when used during the boil with whole hops it acts as a hop back.

BREWERY THERMOMETER $59.95-
4" dial with 6" probe complete with threaded fitting to mount on above kettle.

POLAR WARE 10 gl STOCK POT $145.00
Commercial grade stainless steel construction featuring strong welded loop handles which means there are no holes like those used on riveted handles. Includes lid.

WORT CHILLERS
Immersion wort chillers are the most cost efficient answer to chilling wort. These are simple heat exchangers consisting of a copper coil with a cold water inlet and a hot water outlet. Heat is transferred from the wort and expelled through the outlet hose. The wort temperature change is fast which aids in the development of cold-break.

25 ft. DUAL COIL CHILLER $29.95-
Our 25' dual coil chiller is designed for use in 3 to 8 gallon pots. The design provides two coils of 3/8" copper. The inner coil extracts heat from the center of brew pot while the outer coil cools the area around the inside wall. This eliminates the need for stirring during heat extraction and keeps the brew pot closed. Rigid single coil construction protects these units from crimping. Includes 3' inlet hose with standard brass hose fitting, 3' outlet hose, use and safety instructions.

50 ft. DUAL COIL CHILLER $49.95--for use in 10 to 20 gallon pots.