Gage Interfaces for Palm Handheld PCs

DataGet® the Leading Palm Gauge Data Collector

Collect gauge values on your Palm. The DataGet system is the hardware and software you need to convert a Palm computer into a powerful data collector. Use the DataGet system to save time, improve quality and lower costs.

The electronics in the hardware connects the handheld to the gauge. The software loads on to the handheld computer so you can record, edit, and chart your measurements.

DataGet RS232 Interface
Connect RS232 devices to your Visor. This handy port has a standard DB9 connector to fit your existing cables. All 9 pins work like a PC.
DataGet Mitutoyo Interface
Support for the Palm m125, m130, m500 and m705 DataGet BCD cartridge for Mitutoyo gauges on the Visor DataGet connector for Mitutoyo gauges on the Palm
DataGet Analog Interface
The DataGet Gap Flush cartridge brings you a new level of accuracy. With a precision of +/- 0.0002mm and an accuracy of +/- 0.002mm on a 10mm gauge, it offers the accuracy of a 16 bit A/D convertor.
DataGet Starrett Interface
The new DataGet Starrett cartridge works with Starrett calipers, micrometers, and DigiTape gauges. Once you plug this cartridge into your Visor, you can collect measurements from America's best gauges.
DataGet Thermocouple Interface
The DataGet thermocouple module combines a +/-0.2C accurate temperature reference with a 24 bit Analog Digital Convertor (ADC) to give you the most precise Palm based thermocouple reader.