Gage Interfaces for Digital, Analog, RS232, and LVDT

Industry is striving for increased levels of quality. The time spent controlling and monitoring this can be greatly speeded up by connecting every electronic gage (scales, callipers, thickness gages, profile gages, etc.) which has a data output to a computer.

Many gages, however cannot link to the back of the computer. Either they have the wrong connector, or there is no free connection point (port) on the PC.

Dataputer range of multiplexers allows most gages to link to the PC. They also allow a number of different gages to share the same computer port and enable analogue gages to be connected to the PC.

A simple single Mitutoyo type Digimatic to RS232 interface for easy connection to your PC.

This low cost 4 Channel multiplexer to PC allows you to connect up to 4 Mitutoyo type connectors into a single RS232 port. No additional power required - it is powered by the PC!

Not all gages have Mitutoyo type connectors, this 4 Channel Universal Multiplexer allows you to connect up to 4 gages (either Mitutoyo type, RS232 or Analogue type) into a single RS232 port on your PC.

It is sometimes necessary to have a collection point which has multiple gages being used to measure a range of variables, this 8 Channel Multiplexer allows you to connect up to 8 Mitutoyo type gages to a single RS232 Port.

For those rare occasions when 8 is not enough, the Dataputer 16CH Multiplexer allows you to connect up to 16 Mitutoyo type gages into a single RS232 port of your PC.