The Wayback Machine - https://web.archive.org/all/20050905060630/http://www.dot.state.ga.us:80/dot/operations/traffic-safety-design/SubUnit/sftydes.shtml
You are using an out of date browser or you have scripting disabled. Please ensure that scripting is enabled and that you are using the latest version of your browser. Click one of these links to download a current browser: Netscape, Internet Explorer, Opera, Mozilla.
GDOT, Keeping Georgia on the Move Georgia Department of Transportation
Home Railroad Crossings Safety Management Safety Design General Operations

Safety Design Section

Traffic

Introduction

The Safety Design Section is responible for the following:

  • Design and review of all traffic signal locations.
  • All sign and marking plans for interstates, primary and secondary roads systems.
  • Oversee any ATMS project that will connect or is expected to connect to the Traffic Management Center (TMC).
  • Responsible for all intersection improvement projects that are designed in the General Office or the Districts.
  • Responsible for all special designed impact attenuators.

Current Details

Below is the link to the download utility for all of GDOT's details. Traffic Safety and Design details are currently not accessible from this utility: GDOT Construction Standards & Details

Design Guidelines

Below is a listing of the Design Guidelines availble from the Office of Traffic Safety & Design. These are available for download in Adobe Acrobat format.

Traffic Signal Design Guidelines (3,603 kb)

Interstate Sign Design Guidelines (9,554 kb)

Non-Interstate Signing & Marking Guidelines (5,510 kb)

TS&D; Legend Program


The Safety Design Section is managed by (404-635-8134) and (404-635-8139).

Current projects assigned to the Safety Design Section:

Kathy Bailey's Current Projects Updated 12-01-04

Jim Tolson's Current Projects Updated 12-01-04



Updated April 05, 2005. 18:29

Please send your comments and suggestions to the .
© 2003 Georgia Department of Transportation