pool netting

The installation of pool netting requires patience, skill and lots of experience. When installed properly, pool netting will look fantastic and provide an excellent layer of safety.

The installation process of pool netting begins with the layout. After a careful review of the pool area, the pool deck is marked for drilling. ¾” holes are drilled approximately every 28 inches. These holes are drilled with a water-cooled coredrill utilizing a diamond tipped corebit. The resulting holes are very precise. Flush mounted deck anchors are placed into these holes which hold and support the pool netting.

After the anchors have been installed, the pool netting is stretched tightly across the pool. Stainless steel clips are attached to the swimming pool netting and these clips then attach to the flush anchors. After the pool netting has been pulled tight, the net is cut to the same shape as the pool. The perimeter of the swimming pool netting is then wrapped twice to create a border.

Once the wrapping of the border is complete, the central tensioning cord anchors are installed. The central tensioning system (CTS) is then used to create tension or relax the tension of the pool netting material.

Finally, a removable swimming pool netting roller is installed so that the pool netting can be rolled up and stored for future use.