Alaska Fishing with Mark Glassmaker • 1-800-622-1177
Guide to Alaska Fishing •
Alaska Fishing
Headquarters • Alaska
Fly Out Fishing
Razor ClamsClamming on Cook InletRazor clams are plentiful on the beaches of the eastern shores of Cook Inlet. Clam Gulch and Deep Creek are the most popular beaches for digging. Those who have 4 wheel drive vehicles can drive down the beach and dig clams in less crowded areas. However, the clams are very plentiful and easy to find once you learn what to look for. Clams are most easily taken during negative low tides. Check our tide table to find the best days for clamming. To find razor clams, simply walk along the wet sand and look for a dimple. The dimple is created by the clams siphon. Dig next to the dimple and carefully reach in with your hand until you feel the shell of the clam. Pinch the top of the shell until the foot of the clam releases from the bedrock below. Then, pull the clam out and add him to your bucket. Often, you will find several clams in one hole. A word of caution is in order. Razor clams are called that for a reason. The shells are very brittle and break easily. The shells, when broken, are very sharp. So, reach into the sand carefully and when you dig, do so a few inches away from the dimple and not on top of it. Mark Glassmaker will provide guests with buckets, boots and shovels for clam digging. Be sure to obtain a tide book and shellfish harvest permit (free). Give clamming a try during your visit. See also, our side tracks page for steamer clams in Katchemak Bay. Driving Directions From the intersection of Sterling Highway and Redoubt Avenue, proceed west on Sterling Highway, over the Kenai River bridge. Continue south on Sterling Highway toward Homer. Clam Gulch is on the wey to Deep Creek which is located at mile point 137. Plan to be on the beach at least 1 hour before low tide.
Conservation
|
©
2003-2006, Alaska Fishing with Mark Glassmaker |