ACE 925A PS2 PFC Computer Power Supply
200W AC input PS/2 type PFC power supply
.jpg)
Tech SpecsInput Table:
| Model |
Input range |
| ACE-940AP |
95~264V AC , 47~63Hz(Full-Range) |
| ACE-935AL |
85~140V AC or 170~270V AC, 47~63Hz |
| ACE-932A |
85~130V AC or 180~265V AC, 47~63Hz (Auto-Switch) |
| ACE-930AP(230V) |
180 ~ 264V, AC, 47~53Hz |
| ACE-925A/925AP |
85~265V AC, 47~63Hz (Full-Range) |
| ACE-920A/920AP |
85~265V AC, 47~63Hz (Full-Range) |
Output Table (at 40%):
| Model |
Rated Load |
Peak Output |
| +5V |
+12V |
-12V |
-5V |
+5V |
+12V |
| ACE-940AP |
40A |
15A |
0.8A |
0.3A |
0A |
18A |
| ACE-935AL |
40A |
8A |
0.7A |
0.3A |
0A |
10A |
| ACE-932A |
33A |
8A |
3A |
0.5A |
40A |
12A |
| ACE-930AP(230V) |
30A |
12A |
0.5A |
0.5A |
32A |
15A |
| ACE-925A/925AP |
22A |
7A |
0.7A |
0.5A |
24A |
10A |
| ACE-920A/920AP |
20A |
4A |
0.5A |
0.5A |
0A |
7A |
Inrush Current
- ACE- 940AP: 80A(Peak) @115VAC or 120A(peak) @230VAC
- ACE- 935A/932A: Not exceed 15A@115V AC or 30A@230V AC
- ACE- 925A/925AP/920A/920AP: Not exceed 30A@115V AC or 60A@230V AC
Ripple and Noise :
- ACE- 940AP: Less than 120mV @+12V and 3% of each output at rated load
- ACE- 935A/932A: Less than 1% of each output at rated load
- ACE- 925A/925AP/920A/920AP: Less than 140mV@+12V, and 1% of each other outputs at rated load
Line Regulation :
- ACE- 940AP: The line requlation for each outputs are less than 5%
- ACE- 935A/932A: The line regulation for each outputs are less than 1%
- ACE- 925A/925AP/920A/920AP/930AP: Less than 2%@+12V and 1%@Others
Efficiency : Higher than 65% (ACE-930AP/940AP),Higher than 68% (ACE-935AL/932A/925A/925AP/ 920A/920AP)
Hold-up Time: ACE-940AP: 17ms (typical) @115V AC
ACE-935L/932A: 20ms (typical)@115V AC
ACE-925A/925AP/920A/920AP: 14ms(typical)@115V AC
ACE-930AP: 10ms(typical)@230VAC
Altitude : 0~10,000ft
Protection : Over voltage protection. The trip point is around 5.7V ~ 7.0V output Short circuit and overload
Vibration : 10 ~ 55Hz at 2G 3min. period, 30 min. along X, Y and Z axis
Shock : 10G for 20ms once on each X, Y and Z axis
MTBF :
-ACE-940AP: 100,000 Hours
-ACE-935AL : 250,246 Hours
-ACE-930AP : 53,000 Hours
-ACE-932A : 124,165 Hours
-ACE-925AP : 149,275 Hours
-ACE-925A : 133,043 Hours
-ACE-920AP : 155,963 Hours
Safety : UL 1950; CSA 22.2 No. 234,(ACE-932A/935A)
TUV EN 60950(ACE-920AP/925AP/930AP)
meets CE (ACE-920AP/925AP/930AP/940AP)
EMI : Meets FCC docket 20780 curve "B", EN55022 class "B"
Harmonic EN 61000-3-2 for ACE-940AP/925AP/920AP, 930AP at 230VAC
EMS Standard (Design to meet the following limits) : EN 50082-2
Operating temperature : -20°C~70°C (ACE-932A),
0°C~40°C(ACE-935AL/930AP/920A/920AP/925A/925AP),
0°C~50°C (ACE-940AP) (Derating curve will occur 50°C~70°C)
Storage temperature : -20°C~80°C(ACE-940AP), -20°C~65°C(ACE-930AP) , 40°C~75°C(ACE-935AL/932A/925A/925AP/920A/920A/920AP)
| Ordering Info |
| ACE-925AP 250W AC input PS/2 type PFC power supply |
| ACE-925A 200W AC input PS/2 type power supply |
| ACE-925A 250W AC input PS/2 type power supply |
| ACE-925AP 250W AC input PS/2 type with PFC power supply |
.gif)
.jpg)
.jpg)
Tech Specs