Security Monitoring | Brunswick NC & Wilmington

Monitoring Packages and Equipment

Monitoring Packages & Best Rates
Equipment
Medical Alert Monitoring
Advanced Home Solutions
Remote Access, Video, and more

Wilmington and Brunswick County NC Security Monitoring and Alarm Systems.

Getting Started

Why Choose Us?
Free on-site evaluation
Use Your Existing Equipment:
Switch to ATMC Security and Save
Who is Security Central?

Our Customers

Hear what they have to say:

I'm amazed at how easy this system is to operate. My husband travels . . . read more
ATMC Security Technician Dexter Sholar made me feel that I was in good hands . . . read more
My home had been broken into so I decided it was time to get a security. . . read more

Security Help & Support

Contact Information
Directions for testing your system
Questions and Answers
covering the most asked questions about your system and how it works

ATMC Security is offered by Atlantic Seawinds Communications, LLC. Atlantic Seawinds Communications, LLC is licensed by the Alarm Systems Licensing Board of the State of North Carolina and is a subsidiary of Atlantic Telephone Membership Corporation (ATMC).

Directions For Testing Your Alarm

To ensure that all functions of your system are working properly, your system should be tested once a month. Be sure to test each zone. Follow these steps for testing your system:

To place your system in test mode:

Call the Monitoring Station at 1-800-560-1085.
Give them your NAME and PASSWORD (your password is located on your Security Monitoring Service Agreement contract inside the information folder you were given at the time of installation).
Tell the Monitoring Station service representative that you would like to place your system in test mode.

Walk to your keypad after making sure that all of your windows and doors are closed.
Arm your system in the AWAY MODE. Allow the system to set itself. This usually takes 45-120 seconds.
Stand still while the system is setting itself in AWAY MODE as to not set off any motion detectors in the immediate area.
After your system is set in AWAY MODE, walk throughout your home to trip each device on your system (example, opening your doors, walking in front of motions, opening windows, setting off smoke alarms, using the panic button on your key fob, etc.). Please leave all doors and windows that you opened in the open position until you are done testing.
Your siren should sound indicating that the alarm panel has received signals from the various devices you are testing. The alarm panel will also be dialing the Monitoring Station to send alarm signals to them.
Once you are done tripping the devices, walk to your keypad and observe the screen display. Your zone numbers (your zones are detailed on your Security Monitoring Service Agreement located in the information folder you were given at the time of installation) should sequence through on your display. The display should show the devices you tripped by zone number.
When all of the zones you tripped are displayed, enter your four digit user code. (usually a four digit number you provide to ATMC Security) and the press the OFF button.
Enter your four digit user code and press the OFF button for a second time to reset your system from its’ alarmed state.
Call the Monitoring Station back (1-800-560-1085) and give them your NAME and PASSWORD.
Ask the Monitoring Station to verify your test signals.
If any zones were not reported, repeat the procedure and trip only the unreported zones.
After all of your zones have been tested and verified, tell the Monitoring Station that you are finished testing and you would like to place your account back on line.

***NOTE: You will need to put your system in test mode to change batteries. Please contact ATMC Security at 754-6400 with any questions.

Jun	JUL	Aug
	10
2012	2013	2014