"Zero-Footprint" Pocket Holster

The "age of the mouse gun" is here. Most of these little guns have almost no print at all. The problems with un holstered carry are 1) They eventually rotate the muzzle straight up (toward your head). That's not how anybody wants to draw their weapon from the pocket. 2) Open trigger guard. The thought of keys or other objects getting into the trigger guard makes me nervous. Once again, we were commissioned to provide a solution.

The Challenges:

1) Pocket holster that is ambidextrous for right or left handers and front or back pockets

2) Must keep muzzle pointing downward

3) Adjustable tension from moderate to light lock

4) One spare mag on board

5) Lock option for child safety

Our Solution:

We opted to mold our holster to both sides equally. This minimizes the print on either side and creates ambidextrous usage. For those folks opting for a smaller holster, we offer it without the mag pouch for six dollars less. See the bottom of this page for some other "Stellar Firsts."

Our pocket rigs have become so popular that many are now available for A.M.T. Back-up .45, Beretta Tomcat .32, Colt Pony Pocket-Lite / Mustang 380, Kahr PM-9, Kel-Tecs P-11, P-32, P3AT, North American Arms Guardian .32acp/.25NAA, .380acp/.32NAA, 22LR "mini-revolver" & 22 Magnum "mini-revolver", Seecamp .32, Walther PPK / PPKs

The holster may be pushed off with the middle finger as the weapon is drawn. The Chicago screw can be loosened for less retention, or even replaced with a smaller one for more retention. Plastic screws are "self locking" but not strong enough for much abuse. If you like a tight retention or just like to tinker with adjustments the Model C is a good option. Model C $48

The Model C is available for: Kahr PM-9, Kel-Tecs P-11, P-32 & P3AT

 

Options!

 

Clockwise from the top

Top Right 1:00 Model BL (Kel-Tec P-32 shown). with Vertical Mag Pouch and optional Padlock Hole (behind trigger) and a two piece permanent rivet replacing the Chicago Screw. Tension is set at our shop to be Medium / Light using "ultra-thin" Kydex. $45

Model BL Available for: Beretta Tomcat .32, Colt Pony Pocket-Lite, Kahr PM-9, Kel-Tecs P-32, North American Arms Guardian .32acp/.25NAA, .380acp/.32NAA, Seecamp .32

Center Model A (Kel-Tec P-32shown) . New Model Without Mag Pouch (muzzle at bottom of Holster) $39.99

Model A Available for: A.M.T. Back-up .45, Beretta Tomcat .32, Colt Pony Pocket-Lite / Mustang 380, Kahr PM-9, Kel-Tecs P-11, P-32, P3AT, North American Arms Guardian .32acp/.25NAA, .380acp/.32NAA, 22LR "mini-revolver" & 22 Magnum "mini-revolver", Seecamp .32, Walther PPK / PPKs

Center Model AL (not shown) . New Model Without Mag Pouch (muzzle at bottom of Holster) and optional Padlock Hole (behind trigger) Kel-Tec P-32 Model A L $39.99+9 S&H CONUS = $48.99 (total) Model AL Available for: A.M.T. Back-up .45, Beretta Tomcat .32, Colt Pony Pocket-Lite / Mustang 380, Kahr PM-9, Kel-Tecs P-11, P-32, P3AT, North American Arms Guardian .32acp/.25NAA, .380acp/.32NAA, 22LR "mini-revolver" & 22 Magnum "mini-revolver", Seecamp .32, Walther PPK / PPKs

Lower Right Model B (Kel-Tec P-32 shown) with Mag Pouch Same as top of page but a two piece permanent rivet replaces the Chicago Screw. Tension is set at our shop to be Medium / Light using "ultra-thin" Kydex. $45

Model B Available for: Beretta Tomcat .32, Colt Pony Pocket-Lite / Mustang 380, Kahr PM-9, Kel-Tec P-32, North American Arms Guardian .32acp/.25NAA, .380acp/.32NAA, Seecamp .32

Bottom (6:00) Model C (Kel-Tec P-32 shown) with Mag Pouch Same as top of page with a steel Chicago Screw. Tension is adjustable. Model C $48

The Model C is available for: Kahr PM-9, Kel-Tecs P-32 / P3AT & P-11

Bottom (6:00) Model CL (not shown) with Mag Pouch Same as Model C above and at top of page with a steel Chicago Screw and optional padlock hole. Tension is adjustable. Model C $48

The Model CL is available for: Kahr PM-9, Kel-Tecs P-32 / P3AT & P-11

For the bigger "pocket Guns"

Walther PPK / PPKs Model A

Kel-Tec P-11 Model A

KahrPM9 Model A

KahrPM9 Model C Vertical spare mag pouch / tension is adjustable with a Chicago Screw

 

Model AL (Shown with Colt Pony above left) New Model Without Mag Pouch (muzzle at bottom of Holster) and optional Padlock Hole (behind trigger)

Model B (Shown with Colt Pony above right) Vertical spare mag pouch / tension fixed with a two part rivet.

 

Model AL Available for: A.M.T. Back-up .45, Beretta Tomcat .32, Colt Pony Pocket-Lite, Kahr PM-9, Kel-Tecs P-11, P-32, P3AT, North American Arms Guardian .32acp/.25NAA, .380acp/.32NAA, Seecamp .32, Walther PPK / PPKs

Model B (Shown with Colt Pony above right) with Vertical Mag Pouch with a two piece permanent rivet. Tension is set at our shop to be Medium / Light using "ultra-thin" Kydex. $45

Model B Available for: Beretta Tomcat .32, Colt Pony Pocket-Lite / Mustang 380, Kahr PM-9, Kel-Tec P-32, North American Arms Guardian .32acp/.25NAA, .380acp/.32NAA, Seecamp .32


More Images of A & BL

(shown above). Guardian .380acp/.32NAA Pocket Holster without Mag Pouch Model A $39.99

NAA, 22LR "mini-revolver" & 22 Magnum "mini-revolver" $29.99

Model A Available for: A.M.T. Back-up .45, Beretta Tomcat .32, Colt Pony Pocket-Lite / Mustang 380, Kahr PM-9, Kel-Tecs P-11, P-32, P3AT, North American Arms Guardian .32acp/.25NAA, .380acp/.32, NAA, 22LR "mini-revolver" & 22 Magnum "mini-revolver", Seecamp .32, Walther PPK / PPKs

 

Model BL (NAA Guardian .380/.32NAA shown above) with Vertical Mag Pouch and optional Padlock Hole (behind trigger) and a two piece permanent rivet replacing the Chicago Screw. Tension is set at our shop to be Medium / Light using "ultra-thin" Kydex. $45

Model BL Available for: Beretta Tomcat .32, Colt Pony Pocket-Lite, Kahr PM-9, Kel-Tec P-32, North American Arms Guardian .32acp/.25NAA, .380acp/.32NAA, Seecamp .32


Models C & CL

Vertical Mag Pouch and optional Padlock Hole (behind trigger) and a Chicago Screw for adjustable tension. Molded in our "ultra-thin" Kydex. Available for: Colt Pony Mustang*, Pocket-Lite, Kahr PM-9, Kel-Tecs P-32 / P3AT and P11

$48

*Mustang is not "lockable"

Kel-Tecs P-32 / P3AT are interchangeable on Model C only

Models D & DL

Model D (shown with Kel-Tec P-32 above and below) is our newest design in Pocket Holsters. with mag pouch in a diagonal position to lower the muzzle and a two piece permanent rivet. Tension is set at our shop to be very light.

 

Model D $45

The Model D is available for: A.M.T. Back-up .45 (with Perpendicular Mag Pouch), Beretta Tomcat .32, Kel-Tec P-32, Seecamp .32, Walther PPK / PPKs

Model DL (shown above with Berretta Tomcat) with Mag Pouch Same as Model D above but with the optional padlock hole behind the trigger. Model D $48

The Model DL is available for: A.M.T. Back-up .45, Beretta Tomcat .32, Colt Pony Pocket-Lite / Mustang 380, Kahr PM-9, Kel-Tec P-32, North American Arms Guardian .32acp/.25NAA, .380acp/.32NAA, 22LR "mini-revolver" & 22 Magnum "mini-revolver", Seecamp .32, Walther PPK / PPKs


 

All pocket holsters for double action pistols are available with a padlock hole at no extra charge. This allows you to slip an ordinary padlock behind the trigger rendering the weapon unfiraable.


Lower Left in the "Options" picture above (8:00) Model E. Ambidextrous Neck Chain Holster for Horizontal Carry. For more info and other neck rigs click on the image above. Comes with 30" Stainless Steel Ball Chain Model E $45

Model E Available for: Kel-Tecs P-32, P3AT, North American Arms 22LR "mini-revolver" & 22 Magnum "mini-revolver"


All Photos by:

Andre M. Dall'au


Add a Tuf Cloth to your order for only $8.99 ($9.99 for Marine Grade)


All Buttons and Custom Graphics by:

Interesting facts about our pocket rigs: 

*Creator of the first rigid ambidextrous self locking pocket holster

*Creator of the of "no flap over gun" concept method of removing "footprint" of a pocket holster

*Creator of the first "spare mag on board" ambidextrous pocket holster

*Creator of the first horizontal self locking ambidextrous neck chain holster

*Creator of the first lockable pocket holster

All this in holsters that are flexible, absorb no moisture or sweat , never discharge tanning acids on you or your weapon and will never "beak in" or rot.