IT NEWS      Sustainability        - Virtualisation   
Technology news and Jobs arrow Science arrow See last partial lunar eclipse of 2008 on August 16-17
See last partial lunar eclipse of 2008 on August 16-17 PDF E-mail
User Rating: / 7
PoorBest 
by William Atkins   
Saturday, 16 August 2008
Many of the peoples of Earth will be able to see this last partial lunar eclipse of 2008 on Saturday night, August 16, and/or Sunday morning, August 17, 2008. Hopefully, the night sky will be clear for you!


Lunar eclipses are visible whenever the Moon is above the horizon. This eclipse on August 16-17 will be best seen from most of Africa, Eastern Europe, central and western Asia, India, and the Middle East.

A map of where the eclipse will be visible is found at: “Partial Lunar Eclipse: August 16 2008.”

Western Europe and the United Kingdom, South America, Eastern Asia, and Australia will be able to observe part of the lunar event. These people will not be able to see the entire eclipse because the Moon will still be below the horizon when it starts, and will only rise above the horizon during the eclipse.

Parts of Australia will see it begin before sunrise, while portions of South America will observe it end just after sunset.

For instance, according to the article “Watchers hope for clear skies for Saturday's eclipse” in the IrishTimes.com website, the maximum portion of the eclipse, a part they will be able to see, will occur in Ireland at about 10:10 p.m. local time.

The Moon will be eclipsed by the Earth by about 80%, which should provide skygazers with a good showing of this major partial eclipse—with weather permitting, that is.

Page two continues the article.



 
< Next story in category   Previous story in the category >
iTWire Technology feature

Virtualisation

Servermaximise your infrastructure, maximise your business

Read more...

Custom Search
 
You don't need to login to post a comment





Lost Password?
No account yet? Register
Subscribe to our free daily newsletter.
HP LoadRunner - VuGen Scripting for Web Public Training (Canberra)
August 20 (9:00 am) - August 21 (11:59 pm), 2008
The Virtual User Generator (VuGen) is a scripting tool used to record and run user actions on the...

BCI Training – Understanding BCM Principles and Good Practice
August 21, 2008 (All Day)
BCI Training – Understanding BCM Principles and Good Practice consists of 5 one day training modu...

BCI Training – Understanding BCM Principles and Good Practice
August 22, 2008 (All Day)
BCI Training – Understanding BCM Principles and Good Practice consists of 5 one day training modu...

BCI Training – Understanding BCM Principles and Good Practice
August 23, 2008 (All Day)
BCI Training – Understanding BCM Principles and Good Practice consists of 5 one day training modu...

BCI Training – Understanding BCM Principles and Good Practice
August 24, 2008 (All Day)
BCI Training – Understanding BCM Principles and Good Practice consists of 5 one day training modu...

BCI Training – Understanding BCM Principles and Good Practice
August 25, 2008 (All Day)
BCI Training – Understanding BCM Principles and Good Practice consists of 5 one day training modu...

BCI Training – Understanding BCM Principles and Good Practice
August 25, 2008 (All Day)
BCI Training – Understanding BCM Principles and Good Practice consists of 5 one day training modu...

HP QuickTest Professional Public Training
August 25 (9:00 am) - August 26 (11:59 pm), 2008
This instructor-led course provides a comprehensive understanding of using QuickTest Professional...

NICTA Big Picture Seminar - Dr Rodney Brooks "Robotics: Shaped by and Shaping the World in 2000 - 2050"
August 25, 2008 (4:00 pm - 5:00 pm)
ABSTRACT: As the 21st century has dawned we have seen a dramatic uptake of robots for unstructure...

BCI Training – Understanding BCM Principles and Good Practice
August 26, 2008 (All Day)
BCI Training – Understanding BCM Principles and Good Practice consists of 5 one day training modu...
New event listings
SolidWorks Innovation Day (Melbourne and Adelaide)
October 17, 2008 (All Day)
Hosted by Intercad, SolidWorks’ Innovation Days will give designers, engineers and manufacturers ...

SolidWorks Innovation Day (Sydney)
October 16, 2008 (All Day)
Hosted by Intercad, SolidWorks’ Innovation Days will give designers, engineers and manufacturers ...

SolidWorks Innovation Day (Brisbane and Perth)
October 15, 2008 (All Day)
Hosted by Intercad, SolidWorks’ Innovation Days will give designers, engineers and manufacturers ...

LIXI Industry Forum 2008
September 10, 2008 (All Day)
Wednesday, 10 September 2008 The Westin Sydney The second annual major industry event for the...

The Consumer of the Future
August 20, 2008 (9:30 am - 12:00 pm)
http://www.aimia.com.au/i-cms?page=4458 Speakers: Malcolm Alder, Partner of Digital Business,...

BCI Training – Understanding BCM Principles and Good Practice
August 20, 2008 (All Day)
BCI Training – Understanding BCM Principles and Good Practice consists of 5 one day training modu...

View Full Calendar
Subscribe to our free daily e-newsletter
Contact , Register , Advertise with iTWire , Links , About iTWire , Feedback , Post your jobs , Events , iTWire site map , Start Blogging , MyBlogLog page
Industry Releases , Submit your release now