|
EvoCam Supported Cameras
|
EvoCam 3.6 onwards includes support for network cameras and video servers. Network cameras are devices that connect directly to the Internet or a local area network, and provide video via their own internal web server. Video servers are very similar to network cameras, but these devices allow you to access one or more composite video sources.
In addition to any QuickTime-compatible camera or video input device, EvoCam can be used to view, record or re-broadcast video from network cameras. EvoCam can also control pan and tilt on some network camera models.
The following network cameras and video servers are supported by EvoCam. Please note that Evological has not exhaustively tested all of these cameras. If a camera is listed here, it has either been tested to work with EvoCam, or it follows the same protocol as one that has been tested and therefore should work without problems.
You must set up the camera or video server before using it with EvoCam. Note that some cameras only provide PC software for initial setup, so contact the manufacturer to check if setup is possible on a Mac if this is an issue for you.
Please help us keep this list accurate by letting us know about any issues you encounter. Thank you!
|
|
Airlink Network Cameras
|
AIC250W, AIC500, AIC500W, AICP310, 747W
Pan/tilt supported
|
|
AirLive Network Cameras
|
|
WL-2000CAM
|
|
AvioSys Network Cameras
|
|
9060A, 9060-O
|
|
AvioSys Video Servers
|
|
9100A
|
|
Axis Network Cameras
|
205, 206, 207, 207W, 207MW, 210, 213 PTZ, 2100, 2120, 2130, 2420, Panorama, M1031-W
Pan/tilt/zoom supported
MPEG-4 video and audio via RTSP supported on 207 series
|
|
Axis Video Servers
|
241Q, 241S, 2400, 2401, 2411, 2460
Pan/tilt/zoom supported
|
|
Canon Network Cameras
|
VB-C10, VB-C50Fi, VB-C50i, VC-C50i, VB-C300
Pan/tilt supported
|
|
D-Link M-JPEG Network Cameras
|
|
DCS-900, DCS-900W, DCS-1000, DCS-1000W, DCS-3220G, DCS-6620
|
|
D-Link MPEG-4 Network Cameras
|
DCS-2000, DCS-2100, DCS-2120, DCS-5300, DCS-5300W, DCS-5300G
Pan/tilt supported
|
|
Edimax Network Cameras
|
|
IC-1500Wg
|
|
Gadspot Network Cameras
|
|
GS1200
|
|
Genius Network Cameras
|
|
Secure300R
|
|
GrandTec Network Cameras
|
|
ICA202
|
|
Hawking Technology Network Cameras
|
|
HNC210, HNC300, HNC320W
|
|
Huviron Network Cameras
|
|
SK-N190, SK-N490, SK-N590
|
|
Intellinet Network Cameras
|
|
550710
|
|
IQinVision Network Cameras
|
|
IQeye
|
|
JVC Network Cameras / Video Servers
|
VN-C30U, VN-A1U
Pan/tilt/zoom supported
|
|
LevelOne Network Cameras
|
|
FCS-0010, FCS-1020
|
|
Linksys Network Cameras
|
|
WVC54G, WVC54GCA, WVC200
|
|
Lorex Network Cameras
|
|
LNE3003
|
|
NCL Security Network Cameras
|
|
IPC-WZ300N
|
|
NorthQ Network Cameras
|
|
NQ-9006
|
|
OvisLink Network Cameras
|
|
WL-5400CAM
|
|
Panasonic Network Cameras
|
BB-HCM311A, BB-HCM331A, BB-HCM381A, BL-C10A, BL-C20A, BL-C30A, BL-C111A, BL-C131A, KX-HCM10, KX-HCM230, KX-HCM250, KX-HCM270, KX-HCM280, WV-NS202
Pan/tilt/zoom supported
|
|
Pixord Video Servers
|
|
1000
|
|
Planex Network Cameras
|
|
CS-W01B
|
|
Powerline Network Cameras
|
|
IP Camera
|
|
Sitecom Network Cameras
|
|
LN-400
|
|
Sony Network Cameras
|
SNC-Z20N, SNC-RZ30N, SNC-M3W
Pan/tilt/zoom supported
|
|
StarDot Network Cameras
|
|
NetCam
|
|
StarDot Video Servers
|
|
Express 6
|
|
Swann Network Cameras
|
|
Max-IP-Cam
|
|
Topower Network Cameras
|
|
NC1000-W10
|
|
Toshiba Network Cameras
|
IK-WB01A, IK-WB11A
Pan/tilt supported
|
|
TRENDnet Network Cameras
|
|
TV-IP100, TV-IP100W, TV-IP110W, TV-IP200, TV-IP200W, TV-IP201W, TV-IP312W, TV-IP400, TV-IP400W, TV-IP410
|
|
VCenter Network Cameras
|
|
NC1000-W10
|
|
Veo Network Cameras
|
|
Observer XT
|
|
Vilar Network Cameras
|
|
IPC1002
|
|
Vivotek Network Cameras
|
|
IP2111, IP2112, IP3133, IP7131, IP7132
|
|
Vivotek Video Servers
|
|
VS2402, VS3100
|
|
Y-cam Network Cameras
|
Black, White, Knight
Requires 2nd generation firmware 1.98 or later
|
|
EvoCam Unsupported Cameras
|
|
Due to firmware limitations, we are unable to add support for the following cameras.
|
|
D-Link Network Cameras
|
|
DCS-950G
|
|
Hawking Technology Network Cameras
|
|
HNC230G, HNC290G
|
|
Linksys Network Cameras
|
|
WVC54GC
|
|
Your Camera Not Supported?
|
|
If you would like Evological to add support for your camera, please contact us at support@evological.com and let us know the exact make and model of your camera. It really helps if you can make your camera accessible to us while we add support for it, so please include access instructions (IP address, port, model, username and password) if possible.
|
|
