Aerospace Medical Dispositions
Item 52. Color Vision
An applicant meets the color vision standard if he/she passes any of the color vision tests listed in Examination Techniques, Item 52. Color Vision
. If an applicant fails any of these tests, inform the applicant of the option of taking any of the other acceptable color vision tests listed in Item 52. Color Vision Examination Equipment and Techniques before requesting the Specialized Operational Medical Tests in Section D below.
Inform the applicant that if he/she takes and fails any component of the Specialized Operational Medical Tests in Section D, then he/she will not be permitted to take any of the remaining listed office-based color vision tests in Examination Techniques, Item 52. Color Vision as an attempt to remove any color vision limits or restrictions on their airman medical certificate.
That pathway is no longer an option to the airman, and no new result will be considered.
An applicant does not meet the color vision standard if testing reveals:
- All Classes
- AOC (1965 edition) pseudoisochromatic plates: seven or more errors on plates 1-15.
- AOC-HRR (second edition): Any error in test plates 7-11. Because the first 4 plates in the test book are for demonstration only, test plate 7 is actually the eleventh plate in the book. (See instruction booklet.)
- Dvorine pseudoisochromatic plates (second edition, 15 plates): seven or more errors on plates 1-15.
- Ishihara pseudoisochromatic plates: Concise 14-plate edition: six or more errors on plates 1-11; the 24-plate edition: seven or more errors on plates 1-15; the 38-plate edition: nine or more errors on plates 1-21.
- Richmond (1983 edition) pseudoisochromatic plates: seven or more errors on plates 1-15.
- Farnsworth Lantern test: an average of more than one error per series of nine color pairs in series 2 and 3. (See instruction booklet.)
- Titmus Vision Tester, Titmus II Vision Tester, Titmus 2 Vision Tester, Titmus i400, OPTEC 2000 Vision Tester, OPTEC 900 Vision Tester, Keystone Orthoscope, or Keystone Telebinocular: any errors in the six plates.
- LKC Technologies, Inc., APT-5 Color Vision Tester: The letter must be correctly identified in at least two of the three presentations of each test condition. (See APT-5 screening chart for FAA-related testing in instruction booklet.)
- Richmond-HRR, 4th edition: two or more errors on plates 5-24. Plates 1-4 are for demonstration only; plates 5-10 are screening plates; and plates 11-24 are diagnostic plates.
- Certificate Limitation. If an applicant fails to meet the color vision standard as interpreted above but is otherwise qualified, the Examiner must issue a medical certificate bearing the limitation:
NOT VALID FOR NIGHT FLYING OR BY COLOR SIGNAL CONTROL
- The color vision screening tests above (Section A) are not to be used for the purpose of removing color vision limits/restrictions from medical certificates of airmen who have failed the Specialized Operational Medical Tests below (Section D). See bold paragraph in the introduction of this section (above).
- Specialized Operational Medical Tests for Applicants Who Do Not Meet the Standard. Applicants who fail the color vision screening test as listed, but desire an airman medical certificate without the color vision limitation, may be given, upon request, an opportunity to take and pass additional operational color perception tests. If the airman passes the operational color vision perception test(s), then he/she will be issued a Letter of Evidence (LOE).
An LOE may restrict an applicant to a third-class medical certificate. Airmen shall not be issued a medical certificate of higher class than indicated on the LOE. Exercise care in reviewing an LOE before issuing a medical certificate to an airman.
Color Vision Correcting Lens (e.g. X-Chrom). Such lenses are unacceptable to the FAA as a means for correcting a pilot's color vision deficiencies.
Unacceptable Tests. Any test not specifically listed above are unacceptable methods of testing for FAA medical certificate. Examples of unacceptable tests include, but are not limited to, the OPTEC 5000 Vision Tester (color vision portion), “Farnsworth Lantern Flashlight,” and “yarn tests.”
- The operational tests are determined by the class of medical certificate requested. The request should be in writing and directed to AMCD or RFS. See NOTE for description of the operational color perception tests.
- Applicants for a third-class medical certificate need only take the Operational Color Vision Test (OCVT).
- The applicant is permitted to take the OVCT only once during the day. If the applicant fails, he/she may request to take the OCVT at night. If the applicant elects to take the OCVT at night, he/she may take it only once.
- For an upgrade to first- or second-class medical certificate, the applicant must first pass the OCVT during daylight and then pass the color vision Medical Flight Test (MFT). If the applicant fails the OCVT during the day, he/she will not be allowed to apply for an upgrade to First- or Second-Class certificate. If the applicant fails the color vision MFT, he/she is not permitted to upgrade to first- or second-class certificate.
An applicant for a third-class airman medical certificate who has defective color vision and desires an airman medical certificate without the color vision limitation must demonstrate the ability to pass an OVCT during the day. The OVCT consists of the following:
- A Signal Light Test (SLT): Identify in a timely manner aviation red, green, and white
- Aeronautical chart reading: Read and correctly interpret in a timely manner aeronautical charts, including print in various sizes, colors, and typefaces; conventional markings in several colors; and, terrain colors
An applicant for a first- or second- class airman medical certificate who has defective color vision and desires an airman medical certificate without the color vision limitation must first demonstrate the ability to pass the OCVT during the day (as above) and then must pass a color vision Medical Flight Test (MFT). The color vision MFT is performed in the aircraft, including in-flight testing. It consists of the following:
- Read and correctly interpret in a timely manner aviation instruments or displays
- Recognize terrain and obstructions in a timely manner
- Visually identify in a timely manner the location, color, and significance of aeronautical lights such as, but not limited to, lights of other aircraft in the vicinity, runway lighting systems, etc.
Applicants who take and pass both the OCVT during the day and the color vision MFT will be given a letter of evidence (LOE) valid for all classes of medical certificates and will have no limitation or comment made on the certificate regarding color vision as they meet the standard for all classes. Applicants who take and pass only the OCVT during the day will be given an LOE valid only for third-class medical certificate.
An applicant who fails the SLT portion of the OCVT during daylight hours may repeat the test at night. Should the airman pass the SLT at night, the restriction
NOT VALID FOR FLIGHT DURING DAYLIGHT HOURS BY COLOR SIGNAL CONTROL
will be placed on the replacement medical certificate. The airman must have taken the daylight hours test first and failed prior to taking the night test.