The 1/5-inch 2-megapixel OV2665 system on chip (SoC) featuring 1.75 μm OmniBSI™ (backside illumination) technology, delivers a number of performance improvements over competing front-side illumination (FSI) sensors, including increased sensitivity per unit area, improved quantum efficiency, reduced crosstalk, and photo response non-uniformity, which all lead to significant improvements in image quality.

Designed specifically to address consumer demand for digital still camera (DSC) quality imaging in a mobile phone, the OV2665 combines the industry's best low-light sensitivity at >1400 mV/(lux-sec) and a 2x improvement in signal-to-noise ratio (70 lux), with the industry's lowest stack height – ideal for today's ultra-slim mobile phones.

The OV2665 SoC provides automatic real time image processing with parallel (DVP) or single lane MIPI interface and supports 2 x 2 binning and sub-sampling down to any arbitrary resolution. Automatic image control features and high frame rates for video encoding deliver vivid still and video images, even in the most challenging lighting conditions.

The highly integrated OV2665 incorporates an advanced image signal processor (ISP) with features such as lens correction, auto exposure, auto white balance, and auto flicker. With two separate phase-locked loop outputs, the MIPI clock can be tuned independently of the internal clock.

Features

1.75 μm OmniBSI technology Industry's best low-light sensitivity 2x improvement (over 1.75 μm FSI) in light level required to achieve 10:1 signal-to-noise ratio (< 70 lux) Industry's lowest stack height Ultra low power and low cost Automatic image control functions: automatic exposure control (AEC), automatic white balance (AWB), automatic band filter (ABF), automatic 50/60 Hz luminance detection, automatic black level calibration (ABLC) Programmable controls for frame rate, AEC/AGC 16-zone size/position/ weight control, mirror and flip, scaling, and windowing Support for video operations

Support for output formats: RAW RGB, RGB565/555, YUV422/420 and YCbCr422 Support for images sizes: UXGA, and any arbitrary size scaling down from SXGA Image quality controls: color saturation, hue, gamma, sharpness (edge enhancement), lens correction, defective pixel canceling, and noise canceling Support for horizontal and vertical sub-sampling, binning Support for LED and flash strobe mode Standard serial SCCB interface Digital video port (DVP) parallel output interface

Product Specifications

Part Number	OV2665-A60A
Package Size	4835 x 4895 µm
Analog/ Digital	Digital
Chroma	Color
Array Size	2860 x 2160 µm
Resolution	2 MP
Package	60-pin CSP3
Optical Format	1/5"
Pixel Size	1.75 µm
Frame Rate	30 @ SVGA 15 @ Full
Power Consumption	Standby: 70 µA Active: 250 mW
Temperature	Stable: 0° - 50°C Operating: -20° - 70°C
Output Format	RAW RGB, RGB, YUV
Product Brief	Product Brief