Making use of brush on waterproof compounds may be a simple and efficient way to dampproof or completely waterproof your basement. Besides, those compounds may be applied to make a wall texture rather distinctive.
A lot of these products seem to be water-resistant, however, as a matter of fact, they are not. For that very reason it is recommended to read some materials associated with waterproofing compounds.
When applying waterproofing compounds, the greatest results are attained when the compound is used for the wall positive side. That is the side of the wall where the water is coming into, but not out.
As for foundations, you will have to dig a little bit to reach the positive side of the walls of the foundation.
Another significant issue is the process of application. To begin with, the walls should be clear prior to applying the compound. In addition, you should remove all paint.
Think about sandblasting the surface or applying a pressure washer to eliminate all filth and paint. When the walls are clean they should be moistened prior to making use of compounds. You should remember: two thin layers of paint are much better than one thick layer.
When the waterproofing compounds have been used, it is high time to take some measures to prevent water from entering.
However, you should take into consideration the recommendations for every product. Inappropriate application may result in unsuccessful waterproofing. Remember that such compounds may also be used to texture walls. They may be grey or pure white and the texture itself is sandy. Ornamental whirls may be completed on your walls if you make use of a hard brush with a handle.
The one disadvantage of brush use on waterproof products is the point that they are not flexible. On the whole, they do not extend and that makes it impractical for them to waterproof a foundation, which forms some openings or breaks. If you are aware that your foundation has been developing constant cracks, apply the epoxies and then cover the wall.