|
CIPM Consultative Committee:
|
|
CCQM Working Groups and Steering Group:
|
President: |
|
Dr W.E. May
Acting Director, Acting Under Secretary of Commerce for Standards and Technology
Vice-President of the CIPM
National Institute of Standards and Technology, United States Department of Commerce
United States
|
Executive Secretary: |
|
Dr R. Wielgosz
Director of the Chemistry Department
Bureau International des Poids et Mesures
France
|
Member(s): |
|
Centro Nacional de Metrología
[CENAM], Querétaro, Qro
D.I. Mendeleyev Institute for Metrology
[VNIIM], St Petersburg
Danish Fundamental Metrology Ltd
[DFM], Lyngby
Federal Institute for Materials Research and Testing/Bundesanstalt für Materialforschung und -prüfung
[BAM], Berlin
Federal Institute of Metrology METAS
[METAS], Bern-Wabern
Health Sciences Authority
[HSA], Singapore
Institute for Reference Materials and Measurements
[IRMM], Geel
Instituto Nacional de Metrologia, Qualidade e Tecnologia
[INMETRO], Rio de Janeiro
International Atomic Energy Agency
[IAEA], Vienna
International Federation of Clinical Chemistry and Laboratory Medicine
[IFCC]
International Organization for Standardization, Committee on Reference Materials
[ISO REMCO], Geneva
International Union of Pure and Applied Chemistry
[IUPAC]
Istituto Nazionale di Ricerca Metrologica
[INRIM], Turin
Korea Research Institute of Standards and Science
[KRISS], Daejeon
Laboratoire National de Métrologie et d'Essais
[LNE], Paris
Laboratory of the Government Chemist
[LGC Ltd], Teddington
National Institute of Metrology
[NIM], Beijing
National Institute of Metrology (Thailand)
[NIMT], Pathumthani
National Institute of Standards and Technology
[NIST], Gaithersburg
National Measurement Institute, Australia
[NMIA], Lindfield
National Metrology Institute of Japan, AIST
[NMIJ/AIST], Tsukuba
National Metrology Institute of South Africa
[NMISA], Pretoria
National Metrology Institute of Turkey
[UME], Gebze-Kocaeli
National Physical Laboratory
[NPL], Teddington
National Research Council of Canada
[NRC], Ottawa, Ontario
Physikalisch-Technische Bundesanstalt
[PTB], Braunschweig
Slovak Institute of Metrology/Slovenský Metrologický Ústav
[SMU], Bratislava
State Laboratory
[SL], Co. Kildare
Technical Research Institute of Sweden
[SP], Borås
VSL
[VSL], Delft
|
Official observer(s): |
|
Agency for Science, Technology and Research
[A*STAR],
Singapore
Bulgarian Institute of Metrology
[BIM],
Sofia
Central Office of Measures/Główny Urząd Miar
[GUM],
Warsaw
Centro Español de Metrología
[CEM],
Madrid
Cooperation on International Traceability in Analytical Chemistry
[CITAC],
Trappes
Hong Kong Government Laboratory
[GLHK],
Kowloon
Hungarian Trade Licensing Office
[MKEH],
Budapest
Instituto Português da Qualidade
[IPQ],
Caparica
National Physical Laboratory of India
[NPLI],
New Delhi
National Physical Laboratory of Israel
[INPL],
Jerusalem
|
Note:
|
|
The Director of the BIPM is a member, ex officio, of all Consultative Committees.
|
|
|
|
|
|
Next meetings: |
|
15 April 2015:
Particulate Workshop (GAWG)
1617 April 2015:
Meeting of the CCQM Working Group on Gas Analysis (GAWG)
1617 April 2015:
Meeting of the CCQM Working Group on Inorganic Analysis (IAWG)
1617 April 2015:
Meeting of the CCQM Working Group on Electrochemical Analysis (EAWG)
17 April 2015:
Meeting of the CCQM Working Group on Surface Analysis (SAWG)
1819 April 2015:
Meeting of the CCQM Working Group on Key Comparisons and CMC Quality (KCWG)
19 April 2015:
Meeting of the CCQM-SPWG (afternoon)
2021 April 2015:
21st meeting of the CCQM
22 April 2015:
Meeting of the CCQM ad hoc Working Group on the Mole (afternoon)
2223 April 2015:
Meeting of the CCQM Working Group on Bioanalysis (BAWG)
2223 April 2015:
Meeting of the CCQM Working Group on Organic Analysis (OAWG)
22 April 2015:
Meeting of the CCQM ad hoc Working Group on CMC (morning)
24 April 2015:
Protein Purity Workshop (BAWG/OAWG)
24 April 2015:
Meeting of the CCQM ad hoc Steering Group on Microbial Measurements (MBSG)
30 June to 1 July 2015:
BIPM Workshop on Global to Urban Scale Carbon Measurements
|
|
|
|
|