Apple iPod video 5G/5.5G

Notice - Do not remove caps and inductors. Simply solder wires to and from the correct pads. Removing C's and L's will increase the risk of lifting the pads and disabling any type of audio output from your logic board.

See aaronylee's guide.
See wgr73's guide.

Figure 01
Solder your wires to the south pads of those Z caps. As shown, the left one is the left channel, and the right one is the right channel.
Image courtesy of joneeboi.


Figure 02
Solder your wires to the south ends of the inductors. L2 and C84 are for the right channel, and L3 and C85 are for the left channel.
Image courtesy of joneeboi.


Figure 03
Speaking of the green arrows, the top pad is for the left channel, and the bottom one is for the right channel.
Image courtesy of aaronylee.


Figure 04
Using Tarkan's CF adapter, gueri_fr accomplished a diyMod 5.5G with internal capacitors.
Image courtesy of gueri_fr.