Kickstarter

Please go to magneturbine.com to view all pics

Hello, Thanks for viewing my project. First, I would like to say that if you don`t believe in any sort of free spinning, non electrified magnetic motor, that has power.....then you should stop reading this right now and redirect your energies on what you feel are more worthwhile pursuits.

 Vision is not for everyone. Michelangelo, DaVinci, Einstein, Steve Jobs, knew they had vision along with countless others, but without anyone to believe in them, they perhaps might not have made it into the history books. It`s nice to have someone who believes in you....or wants to believe in something or someone that will help mankind, so please (if you would) be prepared to put on your thinking caps in a few moments and prepared yourself to enter into the world of the impossible (or so some would have you believe). 

 ENTER THE WORLD OF TOMORROW I will never use the term perpetual motion to describe my invention, first of all, the USPTO (United States Patent and Trademark Office) forbids it, and secondly because it simply doesn`t apply. A magnet over time will degrade in strength (lose its magnetic force) and whether this takes 30 months or 30 years, this unavoidable instance will occur (rendering the magnet itself....non perpetual). 

 PLEASE BE PATIENT WITH YOURSELVES.....I have been looking at these designs for years and its very easy for me to see things clearly and understand the subtle nuances involved, so give yourselves time to ZORB (absorb the concept and design). Please remember in your thinking....as in life.... EVERY DIFFERENCE - MAKES A DIFFERENCE.

 The surfaces of each magnet can be mapped and values assigned for each square millimeter of the surface of the magnet and calculations can be made as magnetic surfaces pass one another. Angular Momentum values can also be assigned based on the weight of IRON and an arbitrarily assigned speed of rotation. Gyroscopic tendencies will occur, and be amplified as the outer retaining ring can be weighted.A program could be written but I believe that a super computer will be needed to do the necessary computations accurately. I have done these computations in my head (vision) and I see the rotors spinning with great force, after all, who needs a fan that will spin for 30 years, when a motor that will run a household or power an automobile is much more desirable.

 There are a few secrets to this machine:

 1) ACTUATING THE MACHINE 1 TIME STARTS IT SPINNING INSTEAD OF BUILDING IN PLACE AND THEN INTRODUCING MOMENTUM (actuating is like condensing a single sided accordion with a shaft running thru it)

 2) THE MAGNETIC FIELDS ARE BORN INSIDE EACH OTHER (THAT IS THE REAL SECRET) 

 3) IN THIS DESIGN THERE ARE 9 ROTOR MAGNETS AND 8 STATOR MAGNETS SO EXACT MATCHING IS IMPOSSIBLE

 4) ALL ROTORS AND STATORS ARE STAGGERED RELATIVE TO EACH OTHER TO AVOID EXACT MATCHING AND TO CREATE A POWER BAND

 5) THE ROTORS ARE BEING REPELLED FORWARD AND AT THE SAME TIME BEING DRAWN FORWARD

 6) GETTING ONE MAGNET OVER THE "HUMP" IS EASY BECAUSE 8 OTHER MAGNETS ARE HELPING TO ACHIEVE THAT AND SO ON...and 45 magnets are being pulled forward and repulsed forward at different intervals at the same time. It`s like 9 of you on one side pulling a rope and 2 on the other side pulling. I wonder who would win?

 7) MINIMAL RESISTANCE AS THE ROTORS AND STATORS NEVER TOUCH ANYTHING BUT BEARINGS AND SHAFT MAGNETIC BEARINGS A POSSIBILITY

 The tip of the rotor swings past the tip of the stator. As these tips cross each other the magnetic fields are born inside each other, little by little as the spear past each other on their way to almost being parallel to each other as they pass the "hump", they start building repulsion which keeps them moving past each other and they also are building attraction as they move past each other until they reach the hump and at that point they are forced past each other by the other 8 rotor magnets that are not at the hump at that time. I know it sounds confusing but if you just keep staring at the picture, you will eventually get it....just be patient with yourself. If you view each rotor as being in between sandwiched in between 2 like fields in the stators (which is the case), you will see that the stators kinda squeeze and "squirt" the rotor magnets ahead, past the stator magnets. The rotors are always playing catchup while the stators are playing must turn.... but can`t.

 ALNICO 9 MAGNETS    AL aluminum NI nickel CO cobalt composition

 aluminum 7% nickel 15% cobalt 35% copper 4% titanium 5% iron 34% ------ 100% 

 You may be great lovers of the petroleum industry and for that reason....you may be OUT. I will understand that and realize at the same time that that industry has provided us with the energy to build this great country and although they have been at the helm of the mighty energy ship for over 150 years, they realize that things cannot go on forever the way they are, and that a new technology will someday sink their ship. Well maybe 1/2 because many products will continue to be made out of petroleum products. But the acid rain and acid seas will cease and the coral and plankton will once again recover, and the birds and the bees will breathe clean air once again. That would be nice.

 BTW   Electricity is generated by:

 Coal = 33%

 Natural gas = 33%

 Nuclear = 20%

 Hydropower = 6% 

 Other renewables = 7% 

 Biomass = 1.6%

 Geothermal = 0.4% 

 Solar = 0.6% 

 Wind = 4.7% 

 Petroleum = 1% 

 Other gases = <1%

 I want to thank each and every one of you for believing in my project and wanting to do something so good for the world. I hope this project is as wildly successful as I believe it will be so that I can do more things to help humanity and to put an end to world hunger. The worst thing in my opinion that happens on our beautiful planet are babies being born thru no fault of their own and whose only living experience....is starving to death. We must end this. Let`s get rid of cancer and aids while we`re at it and can someone talk to these fellas about getting rid of these nuclear weapons....wow that would all make us breathe a little easier too!

 I don`t currently know anything about those things but if I have the means, I will concentrate on finding a solution and cure. We all have a great capacity to learn....we just need to commit and focus.

 Rank Country World Mine Production, By Country (Metric tons, cobalt content) 1 Congo, Dem. Rep. 63000 2 China 7000 3 Canada 6625 4 Russian Fed 6300 5 Australia 5882 6 Cuba 4900 7 Zambia 4200 8 Brazil 3900 9 New Caledonia 2620 10 Philippines 2600 11 South Africa 2500 12 Morocco 1800 13 Indonesia 1700 14 Finland 635 635 15 Madagascar 630 16 Papua New Guinea 469 17 Botswana 195 18 Zimbabwe 88 Countries Mine production Reserves United States — NA 37,000 Australia 6,400 6,500 1,100,000 Brazil 3,000 3,000 85,000 Canada 6,920 7,000 250,000 China 7,200 7,200 80,000 Congo (Kinshasa) 54,000 56,000 3,400,000 Cuba 4,200 4,200 500,000 New Caledonia9 3,190 2,800 200,000 Philippines 3,000 3,700 270,000 Russia 6,300 6,300 250,000 South Africa 3,000 3,000 32,000 Zambia 5,200 3,100 270,000 Other countries 8,000 9,500 750,000 World total (rounded) 110,000 112,000 7,200,000 

 Then there are Iron Nitride formulas et al, that can be utilized to produce unlimited quantities of highly magnetized iron. Molecular Physics is not as hard as you think, and there are many secrets in between the lines...you just have to think about it long and hard(and utilize your vision). I`m always amazed at the number of people who think everything is so hard, when its not. I think NIKE hit the nail on the head when they came up with "just do it". That`s all there is to it...there is no mystery about anything in life. Life is wonderful and fascinating and when I wake up in the morning, I wiggle my fingers and still, can`t believe that I possess life. And....the 1st thought I have is "How can I help my fellow human beings"? The glass is not half full my friends...it`s full up ! Just because some people around you are doing things you consider hurtful, doesn`t mean you have to stoop to that level. Take the high road ALWAYS and be positive, even in the face of adversity. You will become a better person and those around you will see it. You may think that they don`t....but they do. Keep your mind free of negative thoughts and minimize disappointments and stress. It`s the only way you can free up your visionary juices to flow over your mind, cascading into all the cracks and crevices and washing over you like a soft and warm liquid light. And... While that light is on, do yourself one favor.......LOOK. 

 ALL PARTS FOR THIS MOTOR CAN BE MADE AT MY FACILITY I have a 2 story 6000 Sq. ft. facility (steel warehouse) and another 2000 Sq. ft under my house with single and 3 phase capabilities. 240v. single is all I see necessary. Full shop including milling machine, metal lathe, metal band saw, 13" vertical band saw, plastics grinder, dc welder, ac welder, welding torches, propane torches, grinders, ring roller, bench sanders, drill press, many power tools and cordless tools and hand tools too numerous to count. A fork lift and backhoe with loading forks, truck and 20' heavy duty double axle trailer for hauling.

 Electrical induction Melting furnaces cost between 20 to $30,000.00 and annealing ovens and/or furnaces costing between 30 to $40,000.00. These furnaces take about 3 months to arrive as most are built off the shelf and custom ordered. I have built both a steady state magnetizer and a pulse magnetizer capable of magnetizing alnico magnets up to 7"x 6" . I purchased a gas furnace and modified it both by double insulating it to keep heat in and added forced air to the torch. I also built from scratch a bigger, much better insulated forced air gas furnace but I am not attaining high enough temps to completely liquefy the magnet material. I have poured the magnets but its a sludgy pour and I need it to be very liquid I believe it`s possible on this project to design and make the melting furnace and the magnetic annealing furnace the same.

 I know it`s possible and I would like to manufacture these 240v furnaces so that you can make a car engine or home generation system IN YOUR GARAGE !!! (There will be a 30 amp dryer plug for the magnetizer and a 50 amp range plug for the melting furnace...unplugging and plugging these is very easy and safe). Every neighborhood with maybe 10 participants can each make a different part of the magneturbine. I think it would be quite easy, and each can share in the cost of electricity for the furnace until either your house is off the grid or you have modified your vehicle to dock to your house to turn the electrical generator (which we will also manufacture). This is not rocket science people....it`s a very do-able thing. The average electric bill(USA) is 114.00 a month.

 If the generator runs for 30 years without remagnetizing and you will pay it off in 15 years and then all your electricity is free.....hmmm.....I wonder who would be interested in that? Please remember, you would be paying the 114.00 avg. electric bill anyways but instead your just making payments on your home electrical generation system. Then your kids or whomever will be the beneficiary of a self sustaining home. Pretty cool huh? If you know anyone who knows anything about magnetic annealing furnaces....please tell them to contact me thru the magneturbine.com web page. I could use every bit of info about these furnaces that I can get my paws on. Thx for that! 

 Based on magnetizing capacities (which can be upgraded once we figure out how) the maximum size of the motor will be 17" diameter making an 11 disker 34" long (need double the tubing for compression and using 6" x 7" magnets). Remember these motors can be clustered to make a 34" cube from 4 motors making it much more powerful. These cubes can run boats, cargo ships, luxury cruise ships, supertankers????

 Whaaaa? A standard car would use 1 or 2 motors. But you could put one in your sailboat and cruise the world for free. Could you imagine all the people who would get boats and live on the water and meet friends at various gps numbers? Powering your air conditioner while you fish of your boat! I want ALL donors to feel free to make ANY suggestion for:

 1) Web page design and functionality (will require me to give you the password in order for you to make changes) This requires a great deal of trust from me to you, so please be on your best behavior. You can also just send me the jpg. in my email and I can insert it, if you don`t want to get too involved.

 2) MagneTurbine uses and motor size configuration and applications that you may want to acquire rights to. 

3) Design and applications for 1 1/2" model and 4" model using sch 40 pvc pipe 

          OD        ID

 1-1/2" 1.900 1.610 laptops, pads, fans, muscle stimulators, charging stations for phones, laptops, pads, misters, pain blockers, too many small applications to list.................... 

 4" 4.500 4.026 tv`s, game stations, personal air conditioners and cooling pads, pumps and lighting

 6" 6.625 6.065 bicycle assist motors, canoe assist motors, air filtration and water making The housing can be any non ferrous (without iron) tubing as in plastics, aluminum or ceramic. The applications are only limited to your imaginations and there are so many smart people in the world !!! 

 EVERYTHING will be put to vote by ALL donors because I value your input and ideas because you have had your own unique experiences in our world and your ideas and input are so valuable.....pls don`t be shy.....ok? It`s called the Cavalier MagneTurbine...but the Cavalier/"insert your name here" MagneTurbine would be fine by me! 

Let`s get creative ! Come up with a useful and ingenious way to use our magneturbine This MagneTurbine is not the Tox Utat (star trek) but its a close second. I would like to take all of you sailing, a dozen at a time, to enjoy the quietude and serenity of the wind and water on a boat that has a magneturbine installed. I would love to talk to you all individually about new ideas and ways to implement them. Let`s write another patent together! It`s not as hard as you may think.

 In Fact..........................EVERYTHING IS EASY !!!  Just do it !

Thx so much for listening and watch as our world changes with this new invention. I will attempt to solve other problems of the world as I acquire the means to do so.