ISO FTL

 

Cutting and drawing unit for the high-speed loading of knitting machines

Task:
Loading of knitting machines in the high-output textile sector

Technical textiles such as agricultural textile nets for straw bales, vegetable packing for onions, potatoes and zucchini as well as shade and hail protection nets, are all made from flat tape yarn on knitting machines.

The manufacturing process requires that the knitting machine be afforded a reliable material feed, which guarantees robust film thickness, durability and a steady knitting-machine feed speed.

Solution:
High-speed cutting and drawing

The ISO cutting and drawing unit’s in-line system integration is the most cost-efficient manufacturing method for planar textile production. A reason for this is that the specific requirements placed on the yarn characteristics can only be met by directly linking the yarn feeding and finishing processes.

Heated plastic threads and heating comb

Rubberised rollers in the finely-tuned ISO cutting and drawing unit architecture enable a high level of torque transmission. As such, yarn processing speeds of up to 85m/min are achieved.

The gauge of the film tapes is also incredibly narrow: in the manufacture of net tube packing, for example, yarn gauges of around 0.5-0.7 mm in width and only approx. 0.016 mm in thickness are processed.


Benefits of the ISO cutting and drawing unit

  • Unrivalled in terms of speed, quality and efficiency
  • High feeding speed
  • Simple to operate
  • Robust structure
  • Long service life

Impressive mechanical engineering

The focus of the machine concept centres on the drawing of the primary polyolefin film to make monoaxially-oriented flat tape yarn. On passing the heated comb and drawing unit, the tapes are stretched to consequently achieve their impressive strength.

Normally situated behind the machine, the yarn feed system feeds the tapes precisely as required into the knitting machine. First the tape width is set. Then the film is pulled from the film roll and monoaxially drawn within a drawing zone to between 2.7 and 12 times its size. Coordinated to the respective consumption rate, the output tapes then run into the knitting machine.

Single cutting and drawing unit
Double cutting and drawing unit
Triple cutting and drawing unit

The modular design makes the ISO system exceptionally flexible. Thanks to the dual construction, the feeding speed of the two conveyed feeds can be independently selected. Hard-chrome-plated drive lines cater for a minimum of wear and a long machine service life.

FTL aggregate

To produce a high number of yarns, a number of modules are brought together to form one functional block. The width of subsequent machines, the number of guide bars, fine tuning of the machine and selected tape width upon entry into the knitting machine determine the required number of ISO cutting and drawing unit modules.


Specifications of the series ISO cutting and drawing unit

  • Delivery speed: between 1 m/min and 85 m/min
  • Drawing length: x 2.7 to x 12
  • Cutting width: between 4 cuts/inch at 6.35 mm film width to 22 cuts/inch at 1.154 mm film width
  • Film width: 29-inch or approx. 740 mm
  • Film roll: up to 1,000 mm in diameter
  • Optional: supplementary infrared heater for weather-related temperature fluctuations
  • Separate film feed for double monofilament film processing