Tangential / Vortex Air Separators (ASME)
Air separators eliminate air quickly and efficiently from closed loop heating and cooling systems. Water enters and exits through unique tangential nozzle connections, which promote a low velocity swirling vortex effect in the center of the unit. Natural centrifugal forces allow the heavier air-free water to move towards the outer edges, while entrained air is captured by the stainless steel collection tube and released to the top of the separator. This air can then be redirected to the compression tank, or released out of the system through an automatic air vent.
The water then exits near the bottom of the unit bubble free, and protects the system against the noise, blockage and damage commonly caused by entrained air. SPA air separators are available in two styles, with or without an internal strainer. Units with internal strainers are typically used when continual particle filtering of system water is required.
SPA Trim Package Includes:
SPA Series without Strainer
- Shell: Carbon steel
- Heads: Carbon steel
- Maximum Design Pressure: 125 PSIG
- Maximum Design Temperature: 450°F
SPA Series
SPA-2 (Revit / .SAT) |
SPA-2.5 (Revit / .SAT) |
SPA-3 (Revit / .SAT) |
SPA-4 (Revit / .SAT) |
SPA-5 (Revit / .SAT) |
SPA-6 (Revit / .SAT) |
SPA-8 (Revit / .SAT) |
SPA-10 (Revit / .SAT) |
SPA-12 (Revit / .SAT) |
SPA-14 (Revit / .SAT) |
SPA-16 (Revit / .SAT) |
SPA-18 (Revit / .SAT) |
SPA-20 (Revit / .SAT) |
SPA-22 (Revit / .SAT) |
SPA-24 (Revit / .SAT) |
SS-SPA Series
SPA Series with Strainer
- Shell: Carbon steel
- Heads: Carbon steel
- Maximum Design Pressure: 125 PSIG
- Maximum Design Temperature: 450°F
SPA-S Series
SPA-2-S (Revit / .SAT) |
SPA-2.5-S (Revit / .SAT) |
SPA-3-S (Revit / .SAT) |
SPA-4-S (Revit / .SAT) |
SPA-5-S (Revit / .SAT) |
SPA-6-S (Revit / .SAT) |
SPA-8-S (Revit / .SAT) |
SPA-10-S (Revit / .SAT) |
SPA-12-S (Revit / .SAT) |
SPA-14-S (Revit / .SAT) |
SPA-16-S (Revit / .SAT) |
SPA-18-S (Revit / .SAT) |
SPA-20-S (Revit / .SAT) |
SPA-22-S (Revit / .SAT) |
SPA-24-S (Revit / .SAT) |
SS-SPA-S Series
WVAA Air Separator (ASME / Non-ASME)
Air & dirt separators are designed to eliminate entrained air and separate debris associated with start-up and maintenance of any hydronic system. The design incorporates a skim valve, used to eliminate floating debris, a removable end cover for coalescing medium access, and an air vent to automatically release air from the separator.
WVAA Air Separator
WVAA Series Air Separators:
- Non-Removable Cartridge
- ASME certified
- Rated to 250°F and 125 PSI
WVNA
(Non-ASME)
- Non-Removable Cartridge
- Non-ASME
- Rated to 250°F and 150 PSI
High Velocity
WVAA-HV Air Separator
WVAA-HV Series Air Separators:
- Non-Removable Cartridge
- ASME Certified
- Rated to 250°F and 125 PSI
WVNA-HV
(Non-ASME)
- Non-Removable Cartridge
- Non-ASME
- Rated to 250°F and 150 PSI