GNU-Info Bad, Man(1) Good

Posted 16 Dec 2003 at 21:37 UTC by ncm Share This

I remember the first time I encountered GNU Info. A man page said nothing useful, and referred me to GNU Info.

The first problem was that the key bindings were stupid and counterintuitive. (Still are. Every time I run it I have to figure them out all over again.) A bigger problem was that the files were badly organized, so that the information I needed was dispersed to lots of different places. Worst, having scoured the whole subtree, what I needed to know usually was not there.

I could see what had happened. All this handy organizational apparatus had to be used, so everything is broken into little sub-pages. Since it's essentially hierarchical, every detail gets separated from other related details and stuck under a nice sub-sub-heading. The really useful information doesn't really fit under any nice hierarchical category. Since there's no good place to put it, it doesn't get written down at all.

Contrast this with the experience of man pages. On my system, man automatically pipes to less, so I can scroll around freely to see the whole thing. There are headers, but no intrusive hierarchy. For anything useful the author thinks of, there was someplace good to put it, generally next to something related. In better-written pages, there's a flow, with later paragraphs building on earlier foundations. At the end, there's a "see also" that tells me what other man pages might be interesting. Usually there are examples.

The only useful info pages I've seen were converted from man pages.

Back in "the day", something as big as the make manual was considered too big to put in a man page, but that seems not to be a problem any more; certainly the bash man page is huge yet useful and entirely usable.

Can man(1) be improved upon without damaging what's good about it? Does it really lack anything important?

interesting(5), posted 16 Dec 2003 at 23:15 UTC by yeupou » (Master)

moa@ulysse:~$ export PAGER=nl && man bash | tail -1 Remise en forme de bash(1), attendez SVP... 3803 GNU 20 Janvier 1999 BASH(1)

Woaw, I did not knew that the bash's man was as long... This man page is well-crafted, a very good reference. However, I think that addition to this man page would be probably too much.

I've never been fond of info, but I cannot imagine, for instance, the Emacs manual in a man page. Info as probably been written for very very big software, like gmake you mentioned.

Konqueror / Long manuals, posted 16 Dec 2003 at 23:51 UTC by tjansen » (Journeyer)

1. If you are using KDE, try the URL info:commandname 2. Man pages are completely unusable for very long documentation, like gcc or automake

Likewise in gnome (and emacs), posted 17 Dec 2003 at 00:22 UTC by itamar » (Master)

The gnome help browser lets you browse info in htmlish interface. And emacs has an info browser.

not too bad when printed too, posted 17 Dec 2003 at 00:53 UTC by gilbou » (Observer)

your bash experiment, yeupou, makes me think of the ksh man page i checked once. i had installed openbsd and the csh was a bit hard on me so i installed ksh and checked its man page. i started reading but it looked very long to me so i started scrolling down and the more i did scroll, the more pages came to screen and it was frightening at first :)
i have the habit to take notes when i read some man pages but i saw that ksh man page was so big i'd rather print it. in fact, printed man pages look pretty good.
i have a plan9 cd + manual (sent by the plan9 team to me, i was to write an article about it but i left the journal i was working for before i even started that article) and their manual is just man pages printed, and the whole thing is just great and very nice to read.
makes me think of the documentation for unix. i think i read that from "25 years of unix" (buy it if you don't own it, it's only good stuff) that they had first wrote the man pages and documentation before starting to write code. laying doc made sure everything was logical and complete, then it was just programming each tool up to its specs and what it should do. like the design of an api before you start chewing code around, what i consider a very good move to do first when it comes to writing code other people will (hopefully) reuse :D

info adds nothing important, and has weird keystrokes!, posted 17 Dec 2003 at 03:42 UTC by tk » (Observer)

I think man is good, it doesn't lack anything really important.

(Some fundamentalist bloke said, "man is underfeatured". Right, how many bells and whistles do we need to just read a technical document? Should we throw in Microsoft's Clippit too?)

(And, "Still baffles me how people learn vi as if it's the cool thing to do, [...] and yet are scared off by simpler tools such as lynx or info." Because, many of vi's keystrokes can be directly used in more and man. Not info.)

Can man be improved? Some kind of internal/external hyperlinking facility will be nice, but this requires some twiddling in both groff and more. And last I checked, groff's HTML output support is still experimental.)

my info rant, posted 17 Dec 2003 at 10:34 UTC by trs80 » (Apprentice)

I already ranted about info but I'll link to it here for completeness. Thanks ncm for expressing your opinion (which is pretty similar to mine) on man(1) in a less ranty and more coherent way than I did, and putting it into an article (which I should have done).

searching in info documents, posted 17 Dec 2003 at 11:50 UTC by jamesh » (Master)

trs80: the standalone info reader does support searching within an info document. It uses the same keybinding as Emacs does. Just type ctrl+s and start typing. If the word isn't found on the current page, it continues to the next. Press ctrl+s again to search to the next match.

they're kinda different, but I like info, posted 17 Dec 2003 at 15:26 UTC by graydon » (Master)

personally, I really like info. I like that emacs has a nice reader for it, I like writing docs in texi (comparing with docbook and troff, texi is aesthetically much more pleasant to write) and I like the browser paradigm for documentation: setting bookmarks and having a "go back" key really helps.

I think there's a philosophical difference, anyways. texi is designed to "embed reference docs in the context of a book", or book-like document. it's a medium which is more GNU, less unix: the document is supposed to invite readers in, even novices, to learn about your program. texi docs should contain tutorial and getting started sections, as well as reference.

man pages are terse, usually just refreshers in "how to invoke so-and-so properly, and some common mistakes". you still need to know you want to run so-and-so to do a task, and roughly how it works. if you look at a lot of the older man pages, they really are just 1 printed page.

makeinfo --no-header, posted 17 Dec 2003 at 17:13 UTC by abraham » (Master)

You can get the "one page, readable with less" format from texi files as well. I use it to produce files like README and INSTALL from texi source.

In general, I believe the info format is well over its prime. Low-end desktop computer are more than fast enough to convert texinfo on the fly, and can do a much better job when the markup hasn't been stripped. Of course, this would require that a) someone provided an texi based infrastructure, and b) someone wrote the texinfo based browsers.

I do like the texinfo format very much, as is simple and readable, especially compared to all the SGML based formats out there.

The standalone info browser used to be rather broken, because most of the people who cared about info files were using the superior build-in Emacs info browser. I hear that it has improved a lot recently, though.

texi2pod & pod2man, posted 17 Dec 2003 at 18:25 UTC by robilad » (Master)

For SPASS, we use texi2pod and pod2man to create man pages out of texinfo sources. Using texinfo, it's also quite trivial to generate hyperlinked docs from the same source for online help, and PDF docs for printing. There is also a texi2man project somewhere, but it's hopelessly outdated and unmaintained.

For Kaffe OpenVM, though, we[1] are moving over to using DocBook for everything. From that, it should also be easy to generate man pages, hypertext docs, or whatever else people come up with as the documentation standard of the future.

The main problem I have with man is not man pages, it's the arcane language needed to write man pages. I'll take texinfo anyday over roff.

[1] This is a different we.

info is good for what it's good for, posted 17 Dec 2003 at 22:40 UTC by Omnifarious » (Journeyer)

Info is good for very big manuals, or tutorials, or for meta-organization (like having some big tract about sockets that points at the actual documentation for the various related calls). It isn't for small software or documenting individual system calls.

What really should happen is that the info system should additionally be able to produce man pages as well as html, TeX, and .info files as it currently does.

Or, perhaps docbook can be extended so that it can make man pages as well. Man pages are extremely useful as a well indexed quick reference. Other documentation systems should work with man.

perldoc plays well with man.

docbook to man, posted 18 Dec 2003 at 07:35 UTC by jamesh » (Master)

DocBook has had elements for marking up man pages for a long time (I don't know if they were there in the beginning). Just use <refentry> as your toplevel element. The xmlto tool included in many distros can perform the conversion from DocBook/XML to man format like so:

xmlto man filename.xml

Man pages are easier to use, posted 18 Dec 2003 at 09:26 UTC by error27 » (Journeyer)

I do dislike info. I like xemacs but I don't like info. Perhaps JWZ should create a forked version of info. :P

Man pages are easy to use because you can just press "Page Up" or "Page Down" depending on which way you want to go. Also you can search them with the '/' character. That's not intuitive, but I guess a bunch of programs use it.

When you type `man ls` it says right at the top in bold letters what `ls` is and what it does. When you type `info ls` it says right at the top "File:, Node: ls invocation, Next: dir invocation, Up: Directory listing." The info page is confusing and cramped. It doesn't use bold characters to seperate the heading from the rest of the text.

Even large complex topics can be handled with man pages. For example, the Perl man pages are brilliant. I refer to them all the time.

Python has great online books and resources, but I do a lot of programming on the train to work and cannot connect to the net. Even when the html is available, I sometimes prefer man pages.

One thing where I think man pages could be improved was if there was some way to make changes and additions to the documentation. Maybe you could press "CTRL-E" to edit, after you were finished it would be saved somewhere in your $HOME directory.

Also it would be nice if there was someway to automatically upload your changes to the net. The man page would have an embeded address in it and when you typed CTRL-U, then you would type in a few notes about your changes and upload it to the address. The person on the recieving end would have some kind of screening process and then the changes could go live.

In Debian when you look for something that should have a man page but doesn't it points you to "man undocumented". Wouldn't it be awesome if people could throw up some documentation right away without any fuss? Even if they just filled out the name and one line description fields it would help. I use "man -k" all the time when I need programs. In one situation, I logged into a system and couldn't find an editor until I used `man -k` to locate `ae`.

Another man page improvement would be to add more examples of the obvious stuff. The Debian "tar" manual is terrific because it explains everything I want right away. The "tar" manual on other OSs is crap because it doesn't have the examples...

Man Wiki, posted 18 Dec 2003 at 19:16 UTC by ncm » (Master)

I think what error27 is talking about is a man->wiki gateway. I think such a thing could be fabulous, and ought to be remarkably easy to cobble together. There are already lots of man->www gateways that would be easy to adapt. The trick would be getting the edits merged upstream, and merging local edits with new versions released.

Having thought about the whole issue further, I think that (like the products of the Sirius Cybernetics Corporation) the fundamental problems of info are masked by its superficial problems. Its UI stinks, but that's fixable. The fundamental problem may be that while man pages have a recommended set of headings appearing in fixed order, writers of info pages are on their own. It appears that they are, as a rule, spectacularly bad at choosing section headings, and at breaking material along boundaries meaningful to readers.

Besides familiarity, there is much to be said for a standard set of headers that has nothing to do with the program or function being documented. It allows the material in the paragraphs to flow naturally. There's nothing inherent in make or sed that would lead the author of an info page to add a "see also", or even an "examples" section. The only reason they would appear is if they were in the template. Expecting the author to come up with the headings leads them to design bad documents.

No fooling around with a UI can fix this fundamental problem. Even with an info->wiki gateway, the texts would not naturally evolve away from their bad initial organization. The hierarchy would persist.

examples!, posted 18 Dec 2003 at 20:54 UTC by connolly » (Master)

Good man pages have the examples that you're looking for 80% of the time in the first screenful. Monkey-see-monkey-do works. Copy-and-paste, slurp-and-burp, whatever you want to call it. The synopsis section often works this way for arguments to functions.

Please, folks that document etc files and such, gimme examples!

Why do so many man pages list the options in alphabetical order? How many readers open the ls man page thinking quick! I need to know what the -l flag does! More likely, they know they want a long or detailed listing.

Taking an arbitrary topic, I just looked at the man page and the info manual for pr. They both exhuastively enumerate the arguments. (OK, so the synopsis is not too bad, and the one sentence description "Paginate or columnate FILE(s) for printing." is worth its screenspace, and the info page starts with a paragraph or so that's perhaps useful. But then on to the march of arguments they both go.)

Hooray for the author of the pump man page; the one configuration option I wanted to know about (how to keep it from clobbering /etc/resolv.conf and hosing my local DNS cache) is documented with an example!

Successive elaboration, not exhaustive enumeration, please! Start with the most straightforward thing that works. Then add a wrinkle, etc. A tutorial, it's sometimes called.

If, after you've explained what I need 80% of the time, go ahead, document the remaining 20% in exhaustive enumeration style. (if I really want to know how to use all the arcane features, I'll probably have to resort to the O'Reilly book anyway).

Yes, sometimes I have too much time on my hand and I appreciate a good "theory of operation" tome. But not often.

The Linux How-To series was a godsend for a while. Step 1: get the source from; step 2: unpack... make install... put your email addres there. start it up. you win! But I see more and more documents called "How To" that don't tell me how to do it at all, but insist that I learn all about how it's architected for maximum extensibility and flexibility. Argh!

info bad, man worse, posted 19 Dec 2003 at 00:30 UTC by grumbel » (Journeyer)

Both info and man are pretty much flawed, they simply show there age. Sure man is still good enough for providing basically a 'foobar --help' with some addition documentation, but thats it. I find longer manpages quite hard to handle and unpleasant to use due to there lack of any TOC, hyperlinks and other things that make life easier. Let alone that most even lack a simply example section, but thats really more a content issue than a issue with man itself. After all manpages are not much more than plain text-files with some bold/underline markup.

Info on the other side while it provides basic hyperlinks and TOCs and is much more pleasant for longer documentation (Emacs, Gnus, etc.) is not so usefull for the short references that man is good at. Most info pages simply overstructure the commands just a bit to much, so one has to click through a bunch of links before reaching the desired info. The major flaw of info however is the dependency on .info files, .texi provides so much more structure and makes wonderfull printed documents, but all that gets stripped away once they get converted to .info. For example there is no way to get an equally nice printout from an info page compared that one could get from the original .texi page. So if one wants a nice printout one often ends up downloading source (distros seldomly ship the .texi files with the binary packages) and trying to generate a .ps from the .texi sources, which often is far from throuble free (A4 vs letter, double-page vs single-page), so even that way the results are less good than they could be in theory. The .info limitation of course also results in the impossibility of including graphics and such, after all a documentation system should be flexible enough for all apps, not just for command-line tools. So after all getting rid of .info and working directly with the .texi files could already lead to far better results.

One last word to .html documetation as it is seen here and there (Gnome, KDE). While it provides nice looking rendering, it becomes pretty much useless from a users point of view due to the complete lack of structure across multilpe pages, which basically result in the lack of a full-text search across the whole documentation or single section as provided by info.

So what would a good documetation system need? Fulltext search, good command line and GUI clients to access the docu, a way to structure and markup the documentation (after all when I want to look for a commandline option, it would be good to have a way to directly jump to it), a good way to print the docu and after all a few standards or guide lines for documentation writers. Both man and info provide a few of these features, but lack some of the other not less important ones.

Texinfo good, info(1) bad, posted 19 Dec 2003 at 07:27 UTC by aaronl » (Master)

A little digging revealed to me that Info was first writen in 1987. I was betting that it was designed before HTML was in widespread use, and I seem to be correct. I prefer to read texinfo manuals in their HTML or printed forms over using the clumsy info tool. There's no advantage to the info reader - HTML has hyperlinks, which info only implements in an awkward way. I'd prefer lynx to info any day.

Texinfo is pretty good when you evaluate it as a documentation markup format, which is what it is. It's designed to be used for full length reference books, not "pages". It's easily converitble to everything from text to DVI, and nothing forces you to use the info program rather than a browser or PDF viewer. Most texinfo documents (all the GNU ones at least) are avilable in HTML and PDF/PS.

The existence of a useful reference manual in texinfo format is no excuse for a shabby manpage. Info documents should exist to supplement terse man(1) pages. A lot of GNU tools neglect their manpages, and I think more projects should follow the lead of GCC which has a complete 9000 line manual page indexing command line options in addition to reference documentation detailing usage and development.

info, texinfo and html, posted 19 Dec 2003 at 10:33 UTC by abraham » (Master)

info is older than texinfo, I believe it was used for some of the ancient DEC operating systems.

html 1.0 was strongly inspired by texinfo, one could view it as an sgml based version of texinfo, without the programming documentations specific tags.

I actually find info superior for documentations than plain html, because info has "full document search" and "one key reading" (like man pages), plus internal hyperlinks like html. However, a specialized html browser or an ordinary browser plus a bit of scripting on both server and client should be able to offer the same.

Try tkinfo(1), posted 19 Dec 2003 at 13:57 UTC by ftobin » (Journeyer)

I recommend looking at tkinfo; it is a much easier to use than info(1). Info pages, as with HTML pages, are best driven with a mix of keyboard and mouse, which are not both accessible in terminals.

For a good example of proper use of info pages in contrast to manpages is the documentation for CVS. The manpages for CVS are simply reference. The info pages are tutorial.

Is info really that bad?, posted 20 Dec 2003 at 12:26 UTC by richdawe » (Journeyer)

Is info really that bad? I don't find that hard to use. I use it both on the command-line and from Emacs. Its user interface isn't great, but cursors to navigate, s to search whole manual, / to search individual page, u to go up section, etc. These all make sense to me. It's slightly easier to use in Emacs.

Anyhow, I typically use a combination of man, info, Emacs info mode, perldoc, Emacs perldoc mode and HTML pages, depending on whether I just want to refer quickly to the docs or not. For quick reference, command-line man, info and perldoc are great. For longer reading I much prefer the HTML docs.

I think man and info are complementary. man pages are like "cheat sheets" in my opinion. So the GNU project's anti-man page stance strikes me as illogical and just idealogical. Fortunately most GNU packages include man pages anyhow, by using help2man, which generates a nicely formatted summary of the command-line options.

Finally, as usually happens when this topic comes up, you don't have to use info. There are lots of alternative interfaces to info documentation.

technical or politics ?, posted 20 Dec 2003 at 22:13 UTC by gilbou » (Observer)

richdawe: that's a source for the problem, the fact that the anti-man page stance of gnu is not a technical decision but rather an ideological/political one. it's like some recent moves from the gnu gcc project where they do/try to do stuff for political reasons rather than technical ones (and you don't need examples for that, do you ?). doing things from a technical point of view makes me feel good. but too much gnu-fsf land prioritizes ideology/politics and restrict their moves to stuff that gets into agreement with their stance. well, one of the many reasons i keep to bsd rather than linux. just want to restrict myself to technical stuff, not having politricks or alike getting into the equation.

Can't agree, posted 22 Dec 2003 at 10:33 UTC by haruspex » (Journeyer)

gilbou: source for the problem, the fact that the anti-man page stance of gnu is not a technical decision but rather an ideological/political one

I don't think there is any justification for this - but OTOH there are many technical reasons why info is a better conceived system for online documentation (today it's hard to imagine a serious manual without hypertext). Developments of the last 15 years (e.g. HTML) may mean that info isn't going to become the leading viewer but as far as I am concerned, man is obsolete. How that translates into any kind of "ideological/political" position baffles me.

Many people seem to take any opportunity to label GNU capricious. They're the software geniuses you love to hate! Perhaps it's the tall poppy syndrome. Personally I admire GNU both for awesome technical achievements and hard work, as well as their "ideological/political" stance. I imagine they have long given up hope for credit where it's due.

Re: Can't agree, posted 22 Dec 2003 at 11:09 UTC by tk » (Observer)

There are also many flaws with info compared to man -- many have mentioned them above. But since the FSF never mentions these flaws, as far as haruspex is concerned, they don't exist.

Is this a technical justification or what?

Neatly missing one point, and demonstrating my other, posted 22 Dec 2003 at 11:54 UTC by haruspex » (Journeyer)

tk, this still leaves my assertion from the earliest post on the topic - that man begs for a hypertext replacement - on the table.

Would you care to explain why you like to snipe at the FSF? I mean, the whole story. If not, put that prejudice aside to discuss the issue at hand.

Hypertext is good..., posted 22 Dec 2003 at 13:38 UTC by tk » (Observer)

...but it's not urgent. I already said that.

I use man with less, in case that's new to you. When I want to go to the section SHELL BUILTIN COMMANDS in bash(1), I type /^, copy and paste to get


and then press [Enter]. To look up information on the set command, I just enter

/^ *set \[

So there you are: the technical part.

I'm not trying to chase info off the face of the earth. I think everyone should be free to read documentation in whatever way he likes. On the contrary, it's people like your good self who'd like to force/twist/persuade everyone to switch to info, and in the process conjure up imaginary man-iacs who are bent on killing info. The FSF's the one sniping people, not the other way round.

For API reference documentation..., posted 23 Dec 2003 at 05:56 UTC by slamb » (Journeyer) and info have already been replaced. Almost any good, newer library will have documentation in javadoc, doxygen, headerdoc or similar. These systems are completely superior.

Their most important feature is how easy it is to create documentation and keep it up-to-date. It's right with the actual source, so you've already got the file open whenever you're making changes. You can make it whine when things are unimplemented. Because they can look at the program context, the source is much less redundant. It's also very readable. This is a killer feature. For lots and lots of projects, I think it's the difference between not having any documentation at all and having fairly good documentation. Sure, ideally they'd also have tutorials and a user manual, but just API docs isn't horrible, especially with the quality these tools generate (below).

Another important feature is that they generate good-looking, easy-to-browse documentation. You can view it through your web browser of choice, so there are many viewers available, and you're already familiar with their use. You can view the documentation on the project's website without having it installed. It's hypertext with lots of hyperlinks, so it's extremely easy to go to related sections.

Doxygen generates great diagrams. Inheritance diagrams, collaboration diagrams, dependency diagrams, and call tree diagrams. These are really helpful for understanding the system very quickly.

Furthermore, if you're completely set on having man pages, it can generate them. doxygen has a man output mode which is fairly good.

I just wish that all the legacy code I still use had doxygen-generated API references. For one thing, it'd be nice to see everything in a consistent format. For another, my documentation could easily include the underlying code's with hyperlinks and call tree diagrams. For example, my code uses the system C library, boost, OpenSSL, and libpq. None of these have doxygen documentation available. It also uses ICU and libstdc++; they do.

Back on Point, posted 23 Dec 2003 at 17:05 UTC by ncm » (Master)

I would like to focus the discussion a little bit.

Flame wars pro- or anti-FSF, vi, emacs, troff, texinfo, or what have you, are off topic. Yes, the attitude of some in the FSF toward man is unfortunate. People who live in emacs do like it. Yes, troff is archaic markup, and texinfo is nicer in its way, and doxygen is leading the way to a glorious future. This is all secondary.

The point I meant to hint at in the original article was that, normally, newer solutions to old problems are manifestly better than the old ones. The implementer has full benefit of hindsight, a modern execution environment, better tools, new ideas, and motivation. When the new supplants the old, we generally don't notice for long. Everybody switches to the newer, better thing, and moves on. When the new fails to supplant the old, that's worth studying.

Now, some people do like info better, but many don't. That's something odd. With all the advantages, how did info fail to win over so many? It's not as if man got new features that enabled it to compete. (True, less makes it nicer to read man pages than did more, but that's pretty thin icing.) Info's UI is sucks, but there are lots of alternatives, none of which (except emacs, in some quarters) has really caught on.

My claim is that there's something, or things, fundamentally good about the man format, and the contents of actual man pages, that has failed to be translated forward into its proposed replacements. Disparaging man as a "cheatsheet" just prevents you from discovering those merits and adopting or bettering them. (I see the same effect when Lispers disparage C, and a similar effect wherever nationalism is practiced.) "Bigotry prevents insight" is not an earthshaking observation, but it bears repeating now and again.

I have speculated earlier on what it is about the man pages that made them work better for me. It occurs to me, though, that my experience may differ from most readers'. My early exposure to man pages was of the Bell Labs pages, often as filtered through Berkeley. While riddled with factual errors, and incomplete, they set a standard of literacy and thoughtfulness not matched in the info files I have encountered. Very few of the man pages on typical Linux installations are traceable to Bell Labs, or even to Berkeley.

Still, I don't think lamenting the current condition of programmer (or FSF) literacy gets to the heart of the matter. The Bell Labs programmers were also users, like us. Like us, they were also writing for nonprogrammers -- in their case, the Bell legal department word processing department secretaries, at first. When they found a man page unclear, they could read the source, and then check in (with sccs!) improvements on the spot. Improving a random man or info page you encounter these days takes a lot more work. We don't generally have CVS write access for every page we use. A web-based wiki that automatically generates sorta-patches sent to maintainers ought to help encourage participation.

I've already alluded to the difference in organization of info pages, compared to man pages. In info pages, cleavage into sections is left entirely to the author, and in practice, section headings tend to match program features. While this makes the page feel more natural to write, it bewilders those new to a program because it presumes more knowledge than the reader has, yet. Man's more-rigid header organization ensures that top-level topics are familiar to the reader, both because they are the same in different man pages, and because they refer to the users' experience, rather than to internal details of program operation.

Man's more rigid organization also, paradoxically, allows details about a program to be placed more freely. This freedom allows the author to put together in one place details that, if sorted out by category, might be widely scattered. It allows details to be presented in a narrative order more natural to a new user, perhaps building from simple to more elaborate examples, each bringing in a new feature.

Besides encouraging better organization, the man format provokes information that might not otherwise be expressed. Its generic top-level headers create a "commons" for details that relate to more than one part of a program, that might find no place in a hierarchy based directly on program features. At a more basic level, the man format demands thought on what to place under sections "SEE ALSO", "HISTORY", "BUGS", and "FILES", that it might not naturally occur to a program author to document.

None of these merits has anything to do with hypertext capability, or with choice of markup format. There's no inherent reason that info files could not be composed and presented as well as man pages are today. It would take a lot of rewriting, true, and the info program itself would probably best be scrapped. The key, though, is not in the code, but in the structure imposed on authors. Given good text to work from, presentation is a matter of taste.

As for most long-standing problems in Free Software, to improve matters we need clear standards, and apparatus to make participation easy. Both are readily achieved.

Re: Back on Point, posted 23 Dec 2003 at 18:16 UTC by slamb » (Journeyer)

So you're saying that you like man pages better because:

  1. back in the day, it was easy for anyone to edit them, so unclear things were quickly clarified
  2. they follow a really good style guide

#2 should be easy to duplicate. Write style guides for various types of documentation and publicize them. For API reference documentation, Sun already created this guide for writing Javadoc comments. It actually is pretty helpful, but it doesn't address a "History", "Bugs", or "Files" section. You could write a new guide that includes whatever you found helpful about man pages. And add specific notes for languages other than Java and doc tools other than Javadoc.

Additional man vs. info rant, posted 6 Jan 2004 at 22:35 UTC by kmself » (Journeyer)

I prefer man. I find the policy of FSF and the GNU Project of deprecatign man pages inexcuseable. Info was a neat idea, but has been surpassed by HTML and DocBook in its niche, and never should have attempted replacing man.

More at Info vs. Manpage.

info considered harmful, posted 5 Feb 2004 at 03:49 UTC by realblades » (Journeyer)

I have not seen info as having any good qualities. It has been very damaging, though. The non-intuitive reader and lack of man pages because the documentation is in info, of course, but then there's the other formats generated from info suffering from the same structure etc.

If a man page is not enough to cover everything, write a whole book elsewhere and have minimal usage (invocation, maybe common commands or options etc) in the man page.

Maybe a monolith that requires that much usage information is not exactly a good design to begin with.

New Advogato Features

New HTML Parser: The long-awaited libxml2 based HTML parser code is live. It needs further work but already handles most markup better than the original parser.

Keep up with the latest Advogato features by reading the Advogato status blog.

If you're a C programmer with some spare time, take a look at the mod_virgule project page and help us with one of the tasks on the ToDo list!

Share this page