current community

your communities

more stack exchange communities

company blog
Stack Exchange Inbox Reputation and Badges
tour help
stack overflow careers
Sign up ×
Stack Overflow is a community of 4.7 million programmers, just like you, helping each other. Join them; it only takes a minute:
up vote 2 down vote favorite
2

I am trying to stream video and audio from my webcam connected to my headless Ubuntu server (running Maverick 10.10). I want to be able to stream in WebM format (VP8 video + OGG). Bandwidth is limited, and so the stream must be below 1Mbps.

I have tried using FFmpeg. I am able to record WebM video from the webcam with the following:

ffmpeg -s 640x360 \
-f video4linux2 -i /dev/video0 -isync -vcodec libvpx -vb 768000 -r 10 -vsync 1 \
-f alsa -ac 1 -i hw:1,0 -acodec libvorbis -ab 32000 -ar 11025 \
-f webm /var/www/telemed/test.webm

However despite experimenting with all manner of vsync and async options, I can either get out of sync audio, or Benny Hill style fast-forward video with matching fast audio. I have also been unable to get this actually working with ffserver (by replacing the test.webm path and filename with the relevant feed filename).

The objective is to get a live, audio + video feed which is viewable in a modern browser, in a tight bandwidth, using only open-source components. (None of that MP3 format legal chaff)

My questions are therefore: How would you go about streaming webm from a webcam via Linux with in-sync audio? What software you use?

Have you succeeded in encoding webm from a webcam with in-sync audio via FFmpeg? If so, what command did you issue?

Is it worth persevering with FFmpeg + FFserver, or are there other more suitable command-line tools around (e.g. VLC which doesn't seem too well built for encoding)?

Is something like Gstreamer + flumotion configurable from the command line? If so, where do I find command line documentation because flumotion doc is rather light on command line details?

Thanks in advance!

share|improve this question

2 Answers 2

up vote 0 down vote

You should consider giving flumotion a try. You can easily set up a webm pipeline capturing from a webcam with flumotion-admin and let it run in the background.

share|improve this answer
up vote 0 down vote

I set this up recently, but it's kind of a pain. Here's what I had to do:

First, build ffmpeg from source to include the libvpx drivers (even if your using a version that has it, you need the newest ones (as of this month) to stream webm because they just did add the functionality to include global headers). I did this on an Ubuntu server and desktop, and this guide showed me how - instructions for other OSes can be found here.

Once you've gotten the appropriate version of ffmpeg/ffserver you can set them up for streaming, in my case this was done as follows.

On the video capture device:

ffmpeg -f video4linux2 -standard ntsc -i /dev/video0 http://<server_ip>:8090/0.ffm
  • The "-f video4linux2 -standard ntsc -i /dev/video0" portion of that may change depending on your input source (mine is for a video capture card).

Relevant ffserver.conf excerpt:

Port 8090
#BindAddress <server_ip>
MaxHTTPConnections 2000
MAXClients 100
MaxBandwidth 1000000
CustomLog /var/log/ffserver
NoDaemon

<Feed 0.ffm>
File /tmp/0.ffm
FileMaxSize 5M
ACL allow <feeder_ip>
</Feed>
<Feed 0_webm.ffm>
File /tmp/0_webm.ffm
FileMaxSize 5M
ACL allow localhost
</Feed>

<Stream 0.mpg>
Feed 0.ffm
Format mpeg1video
NoAudio
VideoFrameRate 25
VideoBitRate 256
VideoSize cif
VideoBufferSize 40
VideoGopSize 12
</Stream>
<Stream 0.webm>
Feed 0_webm.ffm
Format webm
NoAudio
VideoCodec libvpx
VideoSize 320x240
VideoFrameRate 24
AVOptionVideo flags +global_header
AVOptionVideo cpu-used 0
AVOptionVideo qmin 1
AVOptionVideo qmax 31
AVOptionVideo quality good
PreRoll 0
StartSendOnKey
VideoBitRate 500K
</Stream>

<Stream index.html>
Format status
ACL allow <client_low_ip> <client_high_ip>
</Stream>
  • Note this is configured for a server at feeder_ip to execute the aforementioned ffmpeg command, and for the server at server_ip so server to client_low_ip through client_high_ip while handling the mpeg to webm conversation on server_ip (continued below).

This ffmpeg command is executed on the machine previously referred to as server_ip (it handles the actual mpeg --> webm conversion and feeds it back into the ffserver on a different feed):

ffmpeg -i http://<server_ip>:8090/0.mpg -vcodec libvpx http://localhost:8090/0_webm.ffm

Once these have all been started up (first the ffserver, then the feeder_ip ffmpeg process then then the server_ip ffmpeg process) you should be able to access the live stream at http://:8090/0.webm and check the status at http://:8090/

Hope this helps.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.