Dual Battery Monitoring | Dual Battery Systems | Brake Controllers

Performance Dual Battery Monitoring System

Suitable for any 12 volt vehicle with an auxiliary battery system
Made in Australia

Includes:

BATT-MO 12volt Dual Battery Monitoring System
5 x Cable ties
5m Cable
4 x Screws
2 x Double sided tape for mounting
L - 155mm, W - 65mm, H - 40mm
Instructions

Features:
Easy to install, the unit can be placed anywhere in the car with the supplied mounting tape or screws, another option is to place unit in the glove box out of sight. This unit gives you the ability to check voltage on both batteries in the comfort of your car. The advantage of this unique system allows you to check your exact readings digitally for both batteries to ensure that they are charging for your safety on long trips so you will never get stuck off the beaten track.

Download Dual Battery Monitor Flyer

Performance Dual Battery System

12v, 100amp, Electronic Dual Battery System (2 Years Warranty)
A fully automatic dual battery system with smart solenoid suitable for any vehicle
Made in Australia

Includes:

BATT-DB - 12v, 100amp, Dual Battery System
1 x smart solenoid 100amp
5m of 2 B&S red cable
1/2m of 2 B&S black cable
51/2m of loom tube
2 x battery terminals
4 x lugs
4 x heat shrink
5 x cable ties
3 x screws
Instructions

Features:
Easy to install, the electronic isolator does not require any changes to the vehicles existing wiring system. It can be fitted to all 12v vehicles with an auxiliary battery. The solenoid is priority charging, it charges the starting battery first and then will charge the auxiliary battery in parallel with the main. It has a manual override (optional, requires momentary switch) if the starting battery goes flat and the auxiliary battery is charged the solenoid allows the battery to jump start the vehicle.

Specifications:

Voltage 12v
Charging 100amp
Control electronic
Mounting surface, firewall
Connects auxiliary battery for charging when the main is at 13.5v
Disconnects auxiliary battery when the main is at 12.5v

Download Dual Battery System Flyer

Brake Controller

Performance Auto Electrical supply and fit brake controllers to all vehicles.

Tekonsha – Voyager

The Voyager has a green LED display that tells you that the unit is on and there is a complete circuit with the trailer brakes
When braking power is applied, the LED changes colour gradually from green to red, to indicate relative braking power
It can work up to 1 to 4 Axles
Voyager has a five-year limited warranty

Tekonsha – Primus

Self-levelling no adjustment is necessary
Self-diagnostics features will illuminate LED readout when issues occur
Includes a “Boost” feature
Works proportionally in reverse
Snap-in dash mounting clip and hardware included
Limited lifetime warranty

Tekonsha – Prodigy

Electronic Trailer Brake Control for 1 to 4 Axles
no manual levelling
Digital display depicts voltage delivery to trailer during braking
Exclusive "boost" feature allows the trailer to slightly lead a braking event
Proportional braking in reverse
Digital display depicts secure trailer connection
Visual warning if trailer becomes disconnected
Power-saving sleep mode when unit not in use
Limited lifetime** warranty

Redarc

Trailer brake controller with remote head
mounts in dash
Has push button which, when depressed manual applies the trailer brakes independently
Allows the driver to vary the braking power when the vehicle brakes are applied
It illuminates red when the vehicle brakes are applied
It illuminates green indicating the vehicle is towing a trailer with electric brakes
2 year warranty

We can also fit other products if you have purchased your own.