Home » Products » Compactors » Portable Blade Compactor MP1.0 (Low Profile)

Portable Blade Compactor MP1.0 (Low Profile)

The MP1.0 Portable Blade Compactor is the optimum technology for general waste. It is a smaller unit to its big brother the mp1.4.Our portable range of compactors features SMS & email communication system, powder coating, rubber seals throughout and hopper lids. Equipped standard with front/rear wheels and front/rear collection hooks, the portable blade is an extreme versatile compactor ideal for general waste and cardboard. Featuring a cross cylinder and telescopic ram, the portable blade compactor will compact the approximately 1.4m3 per stroke.

Specifications
Length of compactor (including rear hook) – 5200mm (10m3)
Container volume – 10m³- 16m3
Width and height without the hopper – 1950mm x 2438mm
Height of opening – 1400mm
Volume per stroke – 1.4m³
Hopper opening W x L – 1850mm x 1050mm
Motor – 5.5kw
Pressing cycle – 40sec
Schematics included (Appendix B)
415 volts, 3 phase, 5 pin, D type circuit breaker, 16Amp
Optimum Technology – Included Features
¾ and full light indicator via a light and SMS/Email alert system
Up to five (5) contacts for Email/ SMS monitoring system
Compactor will be supplied with one weather proof control panel with key start and housed in a lockable case
Powder coated bin
Front and rear hooks
Rubber seals front and back

Powder Coating

Pottinger line technology incorporates cataphoretic dip priming and powder coating. Both these processes involve environmentally-friendly painting methods. No solvent is used in the mixing and application of the coatings. In comparison to other painting techniques, the above technique has the following advantages:

Excellent corrosion prevention
High UV resistance
Even application of the lacquer layer (thickness)
Environmentally-friendly procedure – thanks to very low percentage of solvents

Guaranteed Longevity & Reliability

Vibration tests and loading/unloading tests have been carried over the past 15 years to provide a comprehensive evaluation of this equipment, guaranteeing longevity and reliability.

Effective Waste & Liquid Retention System

The compacting chamber has a slope towards a small step down from the compaction chamber into the bin. The liquid is contained in the bin up to 100mm high.

Side walls press plate 6mm St 52

Rear Door

The portable blade compactor is completed with a side-hinged rear door with eight-point locking system or top-hinged rear door with 10-point locking system. There is a safety unlocking device and door catch, which ensures the operator is always out of the hazardous area when the back wall is opened. People who are not within the field of vision are protected by the special door catch.