Hi-End 200W R-Core Transformer Great Dynamics and Energy

ELNA Audio Capacitors Extremely Low Ripple Noise

Top of the line ELNA Capactitors for audio application offer unmatched details. Ripple Noise measurement by Lab. <3mv on 19VDC/12VDC outputs

19V/12V/Adjustable Rail Independent Output

True Separate Rail Design. No shared Ground. Guarantee No Cross RFI/EMI Interference. This is a must for multi-rail Linear PSU. All output can work at the same time with no loss of performance and no cross-talk with each other.

Linear Technology LT30451

The LT3045 family is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive applications from Linear Technology. HDPLEX use four LT30451 in parallel for each adjustable rail to achieve 2A and further reduce ripple noise below 1mv. Eight LT30451 chips are used for two identical and independent adjustable rail.

Reliable and Versatile

HDPLEX 200W Linear Power Supply uses high quality NEUTRIK XLR connector. XLR-7.4/5.0mm cable is included for HDPLEX 400W Hi-Fi DC-ATX Converter/Thin ITX AIO/Intel NUC system, XLR-5.5X2.5mm cable for PicoPSU, and XLR-5.5X2.1mm for PPA/SoTM/JPLAY USB Card and 5.5/2.5-SATA for SSD.

Heavy Duty Aluminum Chassis Fanless Operation-100% Silent

In stock

HDPLEX 200W Linear Power Supply

$485.00

Asia : Pre-order for April 25th Batch
USA : Pre-order for April 26th Batch
Germany : Pre-order for April 30th Batch

Have Question About this Product?

HDPLEX 200W Linear PSU Enjoys Free Shipping Worldwide

Stock Status USA : Pre-order for April 26th Batch · Germany : Pre-order for April 30th Batch

Technical Specifications

Wattage: 200W (Max 200W)

Feature

Eight Linear Technology LT30451 chips for two adjustable rails to achieve extremely low noise.

Top of the Line Hi-End Audio ELNA Capacitors

High Quality 200W Silent R-Core Transformer provides clean energy

Separated Ground for Each Output Rail

EMI/RFI Circuit to Prevent AC Grid Pollution

No Humming or Buzz noise for 50Hz and Peak load, 100% Silent

High Quality Neutrik XLR Connector for All Outputs

Low ripple noise and void of high frequency noise

19V/10A XLR Output Supprt Thin ITX/NUC/Auralic Aries Mini/HDPLEX 250W DC-ATX Converter

12V/10A XLR Output Support Legacy Wavelet DAC/Qnap Nas/PicoPSU or 12V based CE device.

Two independent adjustable output is 3.3V/5V/7.5V/9V/12V/15V and 2AMP. Each rail uses four LT30451 chip. It supports SoTM PCIE USB card/MicroRendu/Upton USB Regen/ PPA (Paul Professional Audio) USB Audio card and Squeezebox.

Passive aluminum chassis guarantee absolute silent and stable operation

Chassis Material/Color: Brushed Aluminum/ All Black

Power ON/OFF Switch: Yes (On the Back Plate )

Operating Temperature: -10C - 70C

Safety: Overvoltage Protection(OVP), Undervoltage Protection(UVP), Overcurrent Protection(OCP), Short Circuit Protection

Certification:

CE/EN60950-1 (TCT1405072566S-1)
RoHS (TCT1405074557R-1)
FCC (TCT1405074391F-1)
EMC (TCT1405073270E-1)

Idle Power Consumption: < 4W

Size:300(L) x 186 (W) x 70 (H) mm

Weight:7kg/15 lbs

Input Voltage: 110V/240V AC (MAX 260V AC)

AC Input Connector: IEC with EMI Filter

DC Output:19V/12V XLR---7.4x5.0mm/5.5x2.5mm/5.5x2.1mm Connector

DC Output:Two Adjustable XLR---5.5x2.5mm/5.5x2.1mm(For PPA/SOTM Card) Connector.

Key Specification:

HDPLEX Protection Circuit Explained:

If output voltage is higher than OVP or lower than UVP, HDPLEX 200W Linear Power Supply will cut off all outputs.

Output will recover after unplug the AC power cord for 20 minutes.

If output current is higher than OCP, HDPLEX 200W Linear Power Supply will cut off all outputs.

Output will recover after unplug the AC power cord for 20 minutes.

The OVP/UVP/OCP circuit is to prevent external device from damaging HDPLEX 200W Linear PSU by drawing too much power such as short circuit.

They also protect your external device from being damaged by HDPLEX 200W Linear PSU.

HDPLEX 200W Linear PSU Diagram:

Hardware Compatibility

HDPLEX 200W Linear Power Supply can directly power 19VDC based Thin ITX system,NUC, and Laptop. No additional converter is required.

HDPLEX Linear Power Supply can work with HDPLEX Hi-Fi 400W or 160W DC-ATX Converter to power ATX PC system.

HDPLEX 400W Hi-Fi DC-ATX Converter

HDPLEX Linear Power Supply can directly power 12VDC device such as Auralic streamer, Popcornhour, Audio DAC like Benchmark, and PicoPSU.

HDPLEX Linear Power Supply can power 3.5V-15VDC device such as SoTM tX-USB PCIe USB Audio Card and microRendu using the adjustable 3.5V-15V output.

HDPLEX 200W Linear Power Supply can power 5VDC device such as PPA USB Audio card and Squeezebox.

HDPLEX Linear Power Supply

HDPLEX 200W Linear Power Supply power 5V SSD using the included XLR-5.5/2.5mm-SATA Power Cable.

HDPLEX Linear Power Supply

HDPLEX 200W Linear Power Supply also comes with pre-drilled PCI bracket which allow to wire 5V into PC case internally.

HDPLEX Linear Power Supply

HDPLEX 200W Linear Power Supply can simultaneously power four device. A typical scenario would use HDPLEX 200W Linear Power Supply 19V outpout plus 400W HiFi DC-ATX combo to power the ATX PC, adjustable output set at 7.5V to power the PCIEx1 SOtM card, and the second adjustable output set at 5V to power OS SSD. This will help your PC audio system achieve maxim performance.

HDPLEX Linear Power Supply

Package Content

1 x HDPLEX 200W Linear Power Supply

1x XLR---7.4*5.0 w/PIN Cable(3ft/1m)

2x XLR---5.5/2.5mm Connector Cable(5ft/1.5m) and 2 x XLR---5.5/2.1mm Connector Cable(5ft/1m) (For PicoPSU/SoTM/PPA/JPLAY USB Card External 9V Input,Squeezebox 5V Input)

1 x 5.5/2.5 DC to 2 SATA Power Connector Cable (50cm) (5V Output, Works with USB 3.1 Type C or GX16-5.5/2.5 Cable to Power SSD) and PCI Bracket with two port for 5.5/2.5 DC Jack Input. Enable easy internal wiring for PPA card and SSD power. No extra drilling on the PC case needed!

HDPLEX Linear Power Supply